Gilbern

Gilbern Sports Cars (Components) Ltd
Industry Automobiles
Fate Bankrupt
Founded 1959
Founders
  • Giles Smith
  • Bernard Friese
Defunct April 1973
Headquarters Llantwit Fardre, Pontypridd, Glamorgan, Wales
Key people
  • Mike Leather (Director)
  • Maurice Collins (Director)

Gilbern, Gilbern Sports Cars (Components) Ltd , was a Welsh car manufacturer from 1959 to 1973, based in Llantwit Fardre, Pontypridd, Glamorgan, Wales.

History

Gilbern Sports Cars (Components) Ltd was founded by Giles Smith (previously a butcher, who died in 2003) and Bernard Friese, a German engineer with experience in glass fibre mouldings,[1] and was one of the few cars to be made in Wales. Friese had made a one-off car for himself and the two partners used this as the basis for the first Gilbern car. The premises were a tiny workshop in Church Village, Pontypridd but when production started the business moved to a new location at the old Red Ash Colliery at nearby Llantwit Fardre. The cars were available at first only as kits but later complete cars were also available.

The name, Gilbern, was a combination of the first three letters of the name of founder Giles Smith and the first four letters of the name of his co-founder Bernard Friese.[2][3]

Gilberns have often been entered in competition at the Wiscombe Park Hillclimb, first appearing there in 1962 in the hands of an Aston Martin Owners Club member.[4]

The Society of Motor Manufacturers and Traders accepted Gilbern as a member in 1965, and the company was permitted to operate a stand at the British International Motor Show at Earls Court thereafter.[4]

In 1968, following a search for a cash injection, Gilbern was taken over by Ace Capital Holdings Ltd, whose main business was the manufacture of slot machines.[1] Following the takeover Giles Smith left the company to be replaced by Mike Leather and Maurice Collins as joint managing directors. In 1970 Ace was bought by entertainment group Mecca Ltd, who sold the company to Maurice Collins; in 1972 he in turn sold it to Mike Leather.

The cars were expensive for the time and became more so with taxation changes that added Value Added Tax to kit cars.[5] Production ceased in 1973.

A one-off concept car, the T11, was produced, just prior to the company's closure, and was restored in 2009-10, appearing in some classic car articles in early 2010.

Gilbern GT

Gilbern GT

Gilbern GT1800
Overview
Manufacturer Gilbern Sports Cars (Components) Ltd
Production 1959-1967
280 made[6]
Body and chassis
Body style 2-door coupé
Powertrain
Engine various
Dimensions
Wheelbase 93 in (2,400 mm)[7]
Length 152 in (3,900 mm)[7]
Width 60 in (1,500 mm)[7]
Height 52 in (1,300 mm)[8]
Chronology
Successor Gilbern Genie

The GT, a 2+2 two-door coupé was the company's first car and was made between 1959 and 1967. The GT Mk 1 was initially available with either 948 cc BMC A-Series engine with an optional Shorrocks supercharger or Coventry Climax 1098 cc engines. The chassis was fabricated from square steel tubing and the front suspension was initially from the Austin A35. The body was a one-piece moulding. Although usually supplied in kit form, the body was provided fully trimmed and painted leaving the purchaser to only complete the mechanical items.

Later versions came with a B-series 1500 or 1600 cc MGA or 1800 cc MGB engine and coil-sprung BMC rear axle. With the coming of the larger engine, the car was renamed the GT1800.

A car with 1600 cc (ex MGA) engine was tested by the British The Motor magazine in 1961 and was found to have a top speed of 94.3 mph (151.8 km/h) and could accelerate from 0-60 mph (97 km/h) in 13.8 seconds. A fuel consumption of 35 miles per imperial gallon (8.1 L/100 km; 29 mpg-US) was recorded. The test car cost £978 including taxes of £251.[8]

Gilbern Genie

Gilbern Genie
Overview
Manufacturer Gilbern Sports Cars (Components) Ltd
Production 1966-1969
197 made[9]
Body and chassis
Body style 2-door coupé
Powertrain
Engine Ford Essex V6 engine (2.5L or 3.0L)
Dimensions
Wheelbase 93 in (2,400 mm)[7]
Length 159 in (4,000 mm)[7]
Width 65 in (1,700 mm)[7]
Chronology
Successor Gilbern Invader

In 1966 a larger, more up-market model, the Genie, appeared at the London Motor Show. It could be had with either a 2.5- or 3-litre Ford Essex V6 engine and gearbox with optional overdrive, but the steering and back axle were still BMC units from the MGB. The engine was fitted with a twin-choke Weber carburetor on most cars, although a small number were built with Tecalemit Jackson fuel injection. The rear suspension differed from the MG in having coil-spring/damper units and trailing arms. On early Genies, the rear axle was located with a Panhard rod, which was then changed to a Watts linkage on later examples.

The 2.5-litre version was dropped in 1968. In 1969, a complete car cost around £2000.

late model Gilbern Genie

Gilbern Invader

Gilbern Invader
Overview
Manufacturer Gilbern Sports Cars (Components) Ltd
Production 1969-1973
603 made[9]
Body and chassis
Body style 2-door coupé
Powertrain
Engine 2,994 cc Ford Essex V6
Transmission 4-speed manual all-synchromesh[10]
Dimensions
Wheelbase 93 in (2,400 mm)[7]
Length 159 in (4,000 mm)[7]
Width 65 in (1,700 mm)[7]
Height 51 in (1,300 mm)[10]
Chronology
Predecessor Gilbern Genie

The final car was the Invader, introduced in July 1969[10] and based on the Genie but with improved chassis and larger brakes. The front suspension now came from the MGC and the chassis was strengthened. It took the brand further up- market with fittings such as electric windows and walnut-veneered dashboard. The Invader was available as a complete car and from 1970 an estate version was also produced. Automatic or manual transmission with overdrive were available. It was updated to the Mk II version in 1971.

1972 Gilbern estate in front of Red Dragon pub in Wales

Launched in September 1972,[11] the Mk III version had a Ford Cortina front suspension and was restyled front and rear. The engine was the higher tune unit from the Ford Capri 3000GT. The body was produced using new moulds and was both wider and lower than that of the earlier Invader.[11] Track was extended by four inches (10 cm).[11] The wider axle led to wheel spats being added to the sides of the car. At the back the live rear axle was located by trailing links and a Panhard rod: adjustable shock absorbers were fitted all round.[11]

1973 Gilbern Invader Mk III, note widened fenders

It was only available as a factory-built car and cost £2,693 in 1972.

T11 Concept

Gilbern T11
Overview
Manufacturer Gilbern Sports Cars (Components) Ltd
Production One example produced
Designer Trevor Fiore
Body and chassis
Body style 2-door coupé
Powertrain
Engine Austin Maxi E-Series
Transmission Maxi 5-speed manual all-synchromesh

Designed by British designer Trevor Fiore, the T11 was built in 1970, and was due to show at the 1971 Geneva Motor Show. The company recalled the project, however. The one example produced was restored and completed in 2009-2010.

See also

References

  1. 1 2 Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN 1-57958-293-1.
  2. ↑ Farewell to Welsh sports car pioneer BBC News, September 2003 Retrieved 2014-09-18
  3. ↑ "Odd men in - Motor visits the specialists: Gilbern Cars Limited". Motor. 16 May 1970. pp. 34–38.
  4. 1 2 Gent, Brian (2009). Gilberns at Wiscombe. Dennis Duck Publications. ISBN 978-0-9549199-5-5.
  5. ↑ Writer fights to save Welsh car firm, Bruce Wallace, The Guardian, July 28, 1973, Page 4.
  6. ↑ Robson, Graham (2006). A-Z British Cars 1945-1980. Devon, UK: Herridge & Sons. ISBN 0-9541063-9-3.
  7. 1 2 3 4 5 6 7 8 9 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN 0-333-16689-2.
  8. 1 2 "The Gilbern MkI". The Motor. November 15, 1961.
  9. 1 2 Sedgwick, Michael; Gillies (1993). A-Z of cars 1945-1970. UK: Bay View Books. ISBN 1-870979-39-7.
  10. 1 2 3 "Autotest: Gilbern Invader". Autocar. 131. Vol. (nbr 3834). 14 August 1969. pp. 16–19.
  11. 1 2 3 4 "Worldwide news and comment: Gilbern Invader Mark III". Autocar. 137. Vol. (nbr 3985). 14 September 1972. p. 3.
Wikimedia Commons has media related to Gilbern vehicles.
This article is issued from Wikipedia - version of the 1/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.