MG MGB

MG MGB

1972 model LHD open two-seater in California USA
Overview
Manufacturer BMC, later British Leyland
Production 1962–80
Assembly Abingdon, England
Enfield, Australia [1]
Zetland, Australia [2]
Body and chassis
Class Sports car
Layout FR layout
Chronology
Predecessor MGA
Successor MG F

The MGB is a two-door sports car manufactured and marketed by the British Motor Corporation (BMC), later British Leyland, as a four-cylinder, soft-top roadster from 1962 until 1980. Variants include the MGB GT three-door 2+2 coupé (1965–80), the six-cylinder roadster and coupé MGC (1967–69), and the eight-cylinder 2+2 coupé, the MGB GT V8 (1973–76).

Replacing the MGA in 1962, production of the MGB and its variants continued until 1980, achieving sales for the MGB, MGC and MGB GT V8 combined of 523,836 cars. The MGB bodyshell was reprised in modified form with a limited run of 2,000 MG RV8 roadsters (1993–95).

History

In structure the MGB was an innovative, modern design in 1962, utilizing a monocoque structure instead of the traditional body-on-frame construction used on both the MGA and MG T-types and the MGB's rival, the Triumph TR series.[3] However components such as brakes and suspension were developments of the earlier 1955 MGA with the B-Series engine having its origins in 1947. The lightweight design reduced manufacturing costs while adding to overall vehicle strength. Wind-up windows were standard, and a comfortable driver's compartment offered plenty of legroom. A parcel shelf was fitted behind the seats.

The MGB achieved a 0–60 mph (96 km/h) time of just over 11 seconds. The three-bearing 1798 cc B-Series engine produced 95 hp (71 kW) at 5,400 rpm — upgraded in October 1964 to a five-bearing crankshaft. The majority of MGBs were exported to the United States. In 1975 US-market MGB engines were de-tuned to meet emission standards, ride height was increased by an inch (25 mm), and distinctive rubber bumpers were fitted to meet bumper standards.

The MGB was one of the first cars to feature controlled crumple zones designed to protect the driver and passenger in a 30 mph (48 km/h) impact with an immovable barrier (200 ton).[4][5] Despite this, the British AA motoring association has described the car, like many other classic models, as much less safe than modern cars, and the issue received public attention following a 2013 case in which a driver in a hired 1963 MGB was killed in a collision with a taxi.[6]

A limited production of 2,000 units of the RV8 was produced by Rover in the 1990s. Despite the similarity in appearance to the roadster, the RV8 had less than 5 percent parts interchangeability with the original car.

Drivetrain

A sectioned MGB showing engine and gearbox configuration

Engine: All MGBs (except the V8 version) utilized the BMC B-Series engine. This engine was essentially an enlarged version of that used in the MGA with displacement being increased from 1622 cc to 1798 cc. The earlier cars used a three main bearing crankshaft, 18G-series. In February 1964 positive crank-case breathing was introduced and engine prefix changed to 18GA, until October 1964, when a five-bearing crankshaft design was introduced, engine prefix became 18GB. Horsepower was rated at 95net bhp on both five-main-bearing and earlier three-bearing cars with peak power coming at 5,400 rpm with a 6,000 rpm redline. Torque output on the MGB had a peak of 110 lb·ft (150 N·m) Fuel consumption was around 25mpg.[7] US specification cars saw power fall in 1968 with the introduction of emission standards and the use of air or smog pumps. In 1971 UK spec cars still had 95 bhp (71 kW) at 5,500 rpm, with 105 lb·ft (142 N·m) torque at 2500 rpm. Engine prefix became 18V and the SU carburettor needles were changed for reasons of the latest emission regulations, under ECE15. By 1973 it was 94 bhp (70 kW); by 1974 it was 87, with 103 lb·ft (140 N·m) torque; by 1975 it was 85 with 100 lb·ft (140 N·m). Some California specification cars produced only around 70 hp (52 kW) by the late 1970s. The compression ratio was also reduced from 9 to 1 to 8 to 1 on US spec cars in 1972.

Carburation: All MGBs from 1963 to 1974 used twin 1.5-inch (38 mm) SU carburettors. US spec cars from 1975 used a single Stromberg 1.75-inch (44 mm) carburettor mounted on a combination intake–exhaust manifold. This greatly reduced power as well as creating longevity problems as the (adjacent) catalytic converter tended to crack the intake–exhaust manifold. All MGBs used a SU-built electric fuel pump.

Gearbox:: All MGBs from 1962 to 1967 used a four-speed manual gearbox with a non-synchromesh, straight-cut first gear. Optional overdrive[8] was available. This gearbox was based on that used in the MGA with some minor upgrades to cope with the additional output of the larger MGB engine. In 1968 the early gearbox was replaced by a full synchromesh unit based on the MGC gearbox. This unit was designed to handle the 150net bhp of the three-litre engine of the MGC and was thus over-engineered when mated with the standard MGB B-Series engine. In fact, the same transmission was even used in the 3.5-litre V8 version of the MGB-GT-V8. An automatic three-speed transmission was also offered as a factory option, but proved to be fairly unpopular.

Electrically engaged overdrive gearboxes were an available option on all MGBs. The overdrive unit was operational in third and fourth gears (until 1977, when overdrive was only operational in fourth)[9] but the overall ratio in third gear overdrive was roughly the same as fourth gear direct. The overdrive unit was engaged by a toggle switch located on the dashboard. The switch was moved to the top of the gearshift knob in 1977.[9] Overdrives were fitted to less than 20% of all MGBs, making it a very desirable feature.

There were three different types of overdrive transmissions fitted to the MGB.

1962–1964, 1965–1967

Note: The gearbox input shaft, flywheel and engine backing plate were changed with the advent of the five-main-bearing engine in 1965. Therefore, the transmission for a three-main-bearing engine (1962–1964) differs from its later counterpart.[9]

1968 through 1974.5

[9]

1974.5 through 1980

Note: Overdrive operates in fourth gear only in units made from February 1977 onward.[9]

A sectioned MGB showing the rear axle and differential

Rear axle: Early MGBs used the "banjo" type differential carried over from the MGA with the rear axle ratio reduced from the MGA's 4.1 (or 4.3) to 3.9 to 1. (Compensating for the reduction from 15 inch to 14-inch (360 mm) wheels.) MGB GTs first began using a tube-type rear axle in 1967. This unit was substantially stronger being, like the later gearbox, designed for the three-litre MGC. All MGBs used the tube-type axle from 1968.

Brakes: All MGBs were fitted with 11-inch (280 mm) solid (non-ventilated) disc brakes on the front with drum brakes on the rear. The front brake calipers were manufactured by Girling and used two pistons per caliper. The brake system on the MGB GT was the same as the Roadster with the exception of slightly larger rear brake cylinders. A single-circuit hydraulic system was used before 1968 when dual-circuit (separate front and rear systems) were installed on all MGBs to comply with US regulations. Servo assistance (power brakes) was not standard until 1975. Many modern and contemporary testers have commented on the very heavy brake pedal pressure needed to stop the non-servo-assisted cars.

Electrical system: The MGB initially had an extremely simple electrical system. Dash-mounted toggle switches controlled the lights, ventilation fan, and wipers with only the direction indicators being mounted on a stalk on the steering column. The ignition switch was also mounted on the dash. Like the MGA, the MGB utilized two 6-volt batteries wired in series to give a 12-volt positive earth configuration. The batteries were placed under a scuttle panel behind the seats making access a bit of a challenge but the location gave excellent weight distribution and thus improved handling. The charging system used a Lucas dynamo. Later MGBs had considerable changes to the electrical system including the use of a single twelve-volt battery, a change from positive to negative earth, safety-type toggle (rocker) switches, an alternator in place of the dynamo, additional warning lights and buzzers, and having most common functions moved to steering column stalks.

Tyres: When leaving the factory, all non-V8 MGBs were originally fitted with Pirelli Cinturato tyres (CA67).[10] Cross-ply tyres (560-14) were standard until 1972 with radials being optional. From 1972 there were two different radial sizes factory fitted to new cars, depending whether or not the car was a roadster,(155/80x14) or a GT,(165/80x14). With the 1974.5 arrival of the rubber bumper cars the factory fitted tyre size was simplified to 165/80x14 for all cars, irrespective of whether the car was a roadster or a GT, and also irrespective of the wheel type (wire or RoStyle). Later on during the rubber bumper production period, alloy wheels were introduced on several different limited edition models - with the final one thousand LE models being the last cars to leave the factory with alloy wheels which, although the same 5”x14” rim size as the RoStyle, had 185/70x14 radials fitted. This wider tyre was not factory fitted to wire wheels. The factory built V8s were fitted with full profile 175HR14 tyres.

MGB Roadster

MGB Roadster
Overview
Production 1962–80
Body and chassis
Body style 2-door roadster
Powertrain
Engine 1,798 cc (1.8 l) B-Series I4
Dimensions
Wheelbase 2,312 mm (91.0 in)[11]
Length 3,886 mm (153.0 in)
4,019 mm (158.2 in) rubber bumper version[12]
Width 1,524 mm (60.0 in)[12]
Height 1,219 mm (48.0 in)
1,295 mm (51.0 in) rubber bumper version[12]

The roadster was the first of the MGB range to be produced. The body was a pure two-seater but a small rear seat was a rare option at one point. By making better use of space the MGB was able to offer more passenger and luggage accommodation than the earlier MGA while 3 inches (75 mm) shorter overall. The suspension was also softer, giving a smoother ride, and the larger engine gave a slightly higher top speed. The four-speed gearbox was an uprated version of the one used in the MGA with an optional (electrically activated) overdrive transmission. Wheel diameter dropped from 15 to 14 inches (360 mm).

In late 1967, sufficient changes were introduced for the factory to define a Mark II model for the 1968 model year.[13] Changes included synchromesh on all 4 gears with revised ratios, an optional Borg-Warner automatic gearbox (except in the US), a new rear axle, and an alternator in place of the dynamo with a change to a negative earth system. To accommodate the new gearboxes there were significant changes to the sheet metal in the floorpan, and a new flat-topped transmission tunnel.

To meet US safety regulations, later North American tourers got three windscreen wipers instead of just two (to sweep the required percentage of the glass), and also received a plastic and foam rubber covered "safety" dashboard, dubbed the "Abingdon pillow". Other markets continued with the steel dashboard. Rubery Owen ROstyle wheels were introduced to replace the previous pressed steel versions in 1969 and reclining seats were standardized. 1970 also saw a new front grille, recessed, in black aluminium. The more traditional-looking polished grille returned in 1973 with a black "honeycomb" insert. In North America, 1970 saw split rear bumpers with the number-plate in between, 1971-74 returned to the earlier single piece full length style chrome bumper.

Further changes in 1972 were to the interior with a new fascia.

To meet impact regulations, 1974 US models saw the chrome bumper over-riders replaced with oversized rubber ones, nicknamed "Sabrinas" after the well-endowed British actress. In the second half of 1974 the chrome bumpers were replaced altogether, which are considered 1974.5 models. A new, steel-reinforced black rubber bumper at the front incorporated the grille area as well, giving a major restyling to the B's nose, and a matching rear bumper completed the change.

New US headlight height regulations also meant that the headlamps were now too low. Rather than redesign the front of the car, British Leyland raised the car's suspension by 1-inch (25 mm). This, in combination with the new, far heavier bumpers resulted in significantly poorer handling. For the 1975 model year only, the front anti-roll bar was deleted as a cost-saving measure (though still available as an option). The damage done by the British Leyland response to US legislation was partially alleviated by revisions to the suspension geometry in 1977, when a rear anti-roll bar was made standard equipment on all models. US emissions regulations also reduced horsepower.

In March 1979 British Leyland started the production of black painted limited edition MGB roadsters for the US market, meant for a total of 500 examples. Due to a high demand of the limited edition model, production ended with 6682 examples. The United Kingdom received bronze painted roadsters and a silver GT model limited editions. The production run of homemarket limited edition MGBs was split between 421 roadsters and 579 GTs.

The last MGB Roadster off the production line at Abingdon returned to Abingdon County Hall Museum on 1 December 2011 with the help of British Motor Heritage.[14] It was lifted up 30 feet through a first floor window of the Grade I listed building with inches to spare[15] and now forms part of the collection on display in the main gallery.[16]

Work on a successor for the MGB had been undertaken as long ago as 1968, but British Leyland had ceased work on that project by the end of 1970.[17] When the Abingdon factory finally closed in the autumn of 1980, British Leyland did not replace it.

MGB GT

MGB GT
Overview
Production 1965–80
Body and chassis
Body style 2-door hatchback coupé
Powertrain
Engine 1,798 cc (1.8 l) I4
Dimensions
Wheelbase 2,312 mm (91.0 in)[11]
Length 3,886 mm (153.0 in)
4,019 mm (158.2 in) rubber bumper version[12]
Width 1,524 mm (60.0 in) [12]
Height 1,238 mm (48.7 in)
1,295 mm (51.0 in) rubber bumper version[12]

The fixed-roof MGB GT was introduced in October 1965. Production continued until 1980, although export to the US ceased in 1974. The MGB GT sported a ground-breaking greenhouse designed by Pininfarina and launched the sporty "hatchback" style. By combining the sloping rear window with the rear deck lid, the B GT offered the utility of a station wagon while retaining the style and shape of a coupe. This new configuration was a 2+2 design with a right-angled rear bench seat and far more luggage space than in the roadster. Relatively few components differed, although the MGB GT did receive different suspension springs and anti-roll bars and a different windscreen which was more easily and inexpensively serviceable.

Although acceleration of the GT was slightly slower than that of the roadster, owing to its increased weight, top speed improved by 5 mph (8.0 km/h) to 105 mph (169 km/h) because of better aerodynamics.

The MGB Berlinette produced by the Belgian coach builder Jacques Coune utilized a raised windscreen to accommodate the fastback. 56 were produced.[18]

MGB Berlinette by Jacques Coune Carrossier of Belgium

MGC

MGC & MGC GT
Overview
Production 1967–69
Body and chassis
Body style 2-door roadster
2-door coupe
Powertrain
Engine 2,912 cc (2.9 l) C-Series I6

The MGC was a 2912 cc, straight-6 version of the MGB sold from 1967 and produced until August 1969 [19] with some sales running on into 1970. The car was given the model code ADO52. It was intended as a replacement for the Austin-Healey 3000 which would have been ADO51 but in that form never got beyond the design proposal stage. The first engine to be considered was an Australian-designed six-cylinder version of the BMC B-Series but the production versions used a 7 main bearing development of the Morris Engines designed C-Series that was also to be used for the new Austin 3-litre 4-door saloon. In the twin SU carburettor form used in the MGC the engine produced 145 bhp (108 kW) at 5250 rpm.[20] The body shell needed considerable revision around the engine bay and to the floor pan, but externally the only differences were a distinctive bonnet bulge to accommodate the relocated radiator and a teardrop for carburettor clearance. It had different brakes from the MGB, 15 inch wheels, a lower geared rack and pinion and special torsion bar suspension with telescopic dampers. Like the MGB, it was available as a coupé (GT) and roadster. An overdrive gearbox or three-speed automatic gearbox were available as options. The car was capable of 120 mph (193 km/h) and a 0–60 mph time of 10.0 seconds.[20]

The heavy engine (209 lb heavier than the 1798 cc MGB engine) and new suspension changed the vehicle's handling, and it received a very mixed response in the automotive press. The MGC was cancelled in 1969 after less than two years of production. Today the car is considered very collectible and the main causes of the poor reputation relating to handling have in the main been overcome by better tyres and subtle modification of suspension settings. Simple tuning of the under-developed straight six is also common and simple modifications to head, exhaust and cam release approx 30 per cent more power and torque than original.

At the time of the car's launch the manufacturers stated that the Austin-Healey 3000 would continue to be offered as a parallel model priced on the domestic market at £1,126, compared to the MGC's £1,102.[21]

In 1967 HRH Prince Charles took delivery of an MGC GT (SGY 766F), which he passed down to Prince William 30 years later.[22]

MGB GT V8

MGB GT V8

MGB GT V8
Overview
Production 1973–76
Body and chassis
Body style 2-door coupe
Powertrain
Engine 3,528 cc (3.5 l) Rover V8

MG began offering the MGB GT V8 in 1973 utilising the ubiquitous aluminium-block 3528 cc Rover V8 engine, first fitted to the Rover P5B. This engine had been used in the unibody GM 1961–1963 A-body platform Buick Special/Skylark and Oldsmobile F-85 and 1961–1962 Pontiac Tempest and was the lightest mass-production V8 in the world. The Buick version had a dry, undressed weight of only 318 lb (144 kg) and the 1963 Skylark with optional 4 barrel Rochester carburetor and 10:1 compression ratio produced 200 hp (150 kW) at 5000 rpm. By the time Rover had made webbing modifications to strengthen the block, the engine was considerably heavier (170+kg). Some changes were made by MG-Rover and the engine found a long-lived niche in the British motor industry. These cars were similar to those already being produced in significant volume by tuner Ken Costello. MG even contracted Costello to build them a prototype MGB GT V8. However, the powerful 180 bhp (134 kW) engine used by Costello for his conversions was replaced for production by MG with a more modestly tuned version producing only 137 bhp(102 kW) at 5000 rpm. But 193 lb·ft (262 N·m) of torque helped it hit 60 mph (97 km/h) in 7.7 seconds and go on to a respectable 125 mph (201 km/h) top speed. Fuel consumption was just under 20 mpg.[23]

By virtue of its aluminium cylinder block and heads, the Rover V8 engine weighed approximately forty pounds less than MG's iron four-cylinder. Unlike the MGC, the V8 that provided the MGB GT V8's increased power and torque did not require significant chassis changes nor sacrifice handling.

Both chrome & rubber-bumpered GT versions of the V8-powered MGB were produced by the factory. Production ended in 1976. MG never attempted to export the MGB GT V8 to the United States. They chose not to develop a left-hand-drive version of the MGB GT V8 although the Rover V8 engine was offered in US-bound Rover models throughout the same period and beyond. Abingdon built seven LHD models, sent them to America to achieve certification, and brought them back to the UK, to be sold to mainland European countries.[24]

MG RV8

MG RV8
Overview
Production 1993–95
Body and chassis
Body style 2-seat sports/racer
Powertrain
Engine 3,946 cc (3.9 l) Rover V8

Subsequent to the launch of the Mazda MX-5 in 1989, MG (then owned by Rover Group) produced new body panels for the standard MGB body shell in 1992 to create an updated MGB model. The suspension was only slightly updated, sharing the leaf spring rear of the MGB. The boot lid and doors were shared with the original car, as were the rear drum brakes. The engine was the 3.9-litre version of the aluminium Rover V8, similar to the one previously used in the MGB GT V8. A limited-slip differential was also fitted.

The interior featured veneered burr elm woodwork and Connolly Leather.[25]

The engine produced 190 bhp (142 kW) at 4,750 rpm, achieving 0–60 mph (96 km/h) in 5.9 seconds. Largely due to the rear drum brakes and rear leaf springs, the RV8 was not popular with road testers at the time.

A large proportion of the limited MG RV8 production went to Japan – 1579 of the 2000 produced.[26] Only 330 RV8s were sold initially in the UK.[27] Several hundred (possibly as many as 700) of these cars were re-imported back to the UK and also Australia between 2000–2010 with a peak number of 485 registered at the DVLA in the UK.[28] Several sources consider this a continuation of the MGB model.[29][30][31][32]

Australian assembly

The MGB was assembled in Australia from 1963 to 1972,[33] during which time approximately 9,000 were sold.[34] The cars were assembled from complete knock down kits shipped from England.[34] Initially, assembly was undertaken by the Pressed Metal Corporation at its Enfield facility, but was subsequently moved to BMC Australia’s Zetland plant in 1968.[1] Australian assembly ended in 1972 when the government issued a requirement that, to enjoy favourable tariff treatment, locally produced cars should feature 85 per cent local content.[34] At the time, the local content of the Australian assembled MGBs was evaluated as just 45 per cent.[34] All MGBs assembles in Australia were roadsters.[1]

Motor sport

1965 MGB to FiA Appendix K Specification with period race modifications. Very similar to the cars that raced in the 1960s.

Specially tuned MGBs (including some made out of aluminium) were successful in international road competition events, scoring a Grand Touring category victory in the 1965 Monte Carlo Rally.[35] Circuit racing wins included the Guards 1000 miles race at Brands Hatch in 1965 and the 84-hour Marathon de la Route at the Nürburgring in 1966.[36] MGBs also won the GT Category in the 1966 Targa Florio, the 1966 Spa 1000 and the 1967 Spa 1000.[36]

Notes

  1. 1 2 3 Tom Aczel, History of the Australian-assembled MGB, mgbsmadeinaustralia.org Retrieved on 8 July 2014
  2. History of the MGB mgb.mgcc.info. Retrieved on 21 December 2011
  3. Robson, Graham (2004). The Essential. MotorBooks International. pp. 106–. ISBN 978-0-7603-2003-7. A.s with the Midget, MG took the brave decision to build the MGB around a monocoque structure. Although meant that the capital cost of tooling was higher, it also meant that the new car could be lighter and more rigid. Although MG's General ...
  4. "MG/MGB/Chassis Info". Conceptcarz.com.
  5. "1967 MGB 30mph frontal impact into a concrete block, Abingdon in 1967 (scroll down)". Mgb-stuff.org.uk. Retrieved 2011-07-26.
  6. "AA issues warning to classic car owners after MG 'folded like a penknife'". Daily Telegraph. Retrieved 28 March 2016. Following the death of teacher Nick Sennett, the AA says classic cars 'simply do not have the damage resistance of modern vehicles'
  7. Willson, Quentin (1995). The Ultimate Classic Car Book. DK Publishing, Inc. ISBN 0-7894-0159-2.
  8. Wilson, Quentin (1995). The Ultimate Classic Car Book. DK Publishing. ISBN 0-7894-0159-2.
  9. 1 2 3 4 5 http://www.custompistols.com/cars/articles/ts_od_gearbox.htm
  10. http://www.cinturato.net/page/index
  11. 1 2 "Autotest – MG MGC Automatic". Autocar. Vol. 129 (nbr 3795). 7 November 1968. pp. 10–14.
  12. 1 2 3 4 5 6 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN 0-333-16689-2.
  13. Clausager, Anders Ditlev (2010). Original MGB - With MGC and MGB GT V8. United Kingdom: Herridge & Sons Ltd. pp. 10, 16, 18, 19, 25, 33, 34, 35, 40, 43. ISBN 978-1-906133-18-4.
  14. "Television news item". YouTube. BBC Oxford News. December 1, 2011. Retrieved July 8, 2012.
  15. "MG Exhibition". Abingdon-on-Thames, UK: Abingdon County Hall Museum. Retrieved July 8, 2012.
  16. "MG roadster, soft top; MG Works; 23.10.1980AD; BMHT Loan.1". eHive, Vernon Systems. Abingdon County Hall Museum. Retrieved July 8, 2012.
  17. "Austin Rover Online". Aronline.co.uk. Retrieved 2011-07-26.
  18. Coune MGB Berlinette, www.coachbuild.com Retrieved 13 June 2016
  19. "Used Car Test:1969 MGC". Autocar. Vol. 135 nbr 3940. 30 September 1971. pp. 18–19.
  20. 1 2 The Motor. Road test. Nov 4, 1967.
  21. "Autocar Road Test: MG MGC: New derivative of MGB with six-cylinder engine ... Lack of low speed torque and engine reluctant to rev. Very noisy fan. New all synchromesh gearbox works well but has odd choice of ratios with overdrive. Heavy fuel consumption. Light brakes, with some fade. Good ride; strong understeer; steering low geared. Lots of leg-room. Heater extra. Good finish". Autocar. Vol. 127 (nbr 3744). 16 November 1967. pp. 28–32.
  22. "Safety Fast September 99 – MGC Newsletter". Mgcars.org.uk. Retrieved 2009-12-11.
  23. Motor Magazine 25/8/1973
  24. http://www.v8registerdata.net/viewreply.asp?task=ViewReply&subtask=Archive&id=2001&mtid=(1,2,3,4,7,8,9)
  25. David Dolbel (2010-09-12). "Presenting the MG RV8 at". Mgrv8.com. Retrieved 2010-11-28.
  26. "MG RV8 (1992–1995): Model Covered: 2dr Roadster 3.9 petrol – Yahoo! Cars UK". Uk.cars. yahoo.com. Retrieved 2010-06-25.
  27. "MG RV8 (1992–1995)". rac.co.uk. Retrieved 7 November 2014.
  28. "Number of vehicles licensed or SORN, since 1994". howmanyleft.co.uk. Retrieved 7 November 2014.
  29. "MG RV8 A Clever Reboot of the MG Sports Car Franchise". Hemmings.com.
  30. MGRV8.COM (retrieved 17 April 2014)
  31. Honest John (retrieved 17 April 2014)
  32. Aronline (retrieved 17 April 2014)
  33. MG MGB Roadster (1963–1972) www. carpoint.com.au. Retrieved on 21 December 2011
  34. 1 2 3 4 "News: MGB ends down under". Autocar. Vol. 137 (nbr 3992). 30 November 1972. p. 15.
  35. Readers' guide to who won at Monte Carlo, British Motor Corporation advertisement, Life Magazine, 14 February 1964, page 81 Retrieved from books.google.com.au on 22 December 2011
  36. 1 2 ML Twite, The World's Racing Cars, Fourth Edition, 1970, page 104

References

Wikimedia Commons has media related to MG B.
  • Bonds, Ray (2003). The Illustrated Directory of Sports Cars. Motorbooks. ISBN 0-7603-1420-9. 
  • Clausager, Anders Ditlev (1994). Original MGB With MGC and MGB GT V8. Bay View Books Ltd. ISBN 1-870979-48-6. 
  • Heilig, John (1996). MG Sports Cars. Motorbooks. ISBN 0-7603-0112-3. 
  • Holmes, Mark (2007). Ultimate Convertibles: Roofless Beauty. London: Kandour. pp. 106–107. ISBN 978-1-905741-62-5. 
  • "MGB Home Page". MG Enthusiasts. Retrieved March 21, 2005. 
  • "MGC Home Page". MG Enthusiasts. Retrieved March 21, 2005. 
  • "MGB Buyers Guide". British Owners Group. Retrieved March 21, 2009. 
  • "MGB Buyers Guide". Classic Motorsports magazine. Retrieved April 7, 2009. 
  • Adams, Keith. "The Unofficial Austin Rover Web Resource". 


This article is issued from Wikipedia - version of the 11/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.