Directional derivative

Part of a series of articles about

Definitions
Derivative (generalizations) Differential infinitesimal of a function total
Concepts
Differentiation notation Second derivative Third derivative Change of variables Implicit differentiation Related rates Taylor's theorem
Rules and identities
Sum Product Chain Power Quotient General Leibniz Faà di Bruno's formula

Integral

Definitions
Lists of integrals
Antiderivative Integral (improper) Riemann integral Lebesgue integration Contour integration
Integration by
Parts Discs Cylindrical shells Substitution (trigonometric) Partial fractions Order Reduction formulae

Series

Convergence tests
Geometric (arithmetico-geometric) Harmonic Alternating Power Binomial Taylor
Summand limit (term test) Ratio Root Integral Direct comparison Limit comparison Alternating series Cauchy condensation Dirichlet Abel

Vector

Theorems
Gradient Divergence Curl Laplacian Directional derivative Identities
Divergence Gradient Green's Kelvin–Stokes

Multivariable

Formalisms
Matrix Tensor Exterior Geometric
Definitions
Partial derivative Multiple integral Line integral Surface integral Volume integral Jacobian Hessian matrix

Specialized

In mathematics, the directional derivative of a multivariate differentiable function along a given vector v at a given point x intuitively represents the instantaneous rate of change of the function, moving through x with a velocity specified by v. It therefore generalizes the notion of a partial derivative, in which the rate of change is taken along one of the curvilinear coordinate curves, all other coordinates being constant.

The directional derivative is a special case of the Gâteaux derivative.

Definition

A contour plot of

f(x, y)=x^2 + y^2

, showing the gradient vector in blue, and the unit vector

\bold{u}

scaled by the directional derivative in the direction of

\bold{u}

in orange. The gradient vector is longer because the gradient points in the direction of greatest rate of increase of a function.

The directional derivative of a scalar function

f(\bold{x}) = f(x_1, x_2, \ldots, x_n)

along a vector

\bold{v} = (v_1, \ldots, v_n)

is the function defined by the limit^[1]

\nabla_{\bold{v}}{f}(\bold{x}) = \lim_{h \rightarrow 0}{\frac{f(\bold{x} + h\bold{v}) - f(\bold{x})}{h}}.

In the context of a function on a Euclidean space, some texts restrict the vector v to being a unit vector. Without the restriction, this definition is valid in a broad range of contexts, for example where the norm of a vector (and hence a unit vector) is undefined.^[2]

If the function f is differentiable at x, then the directional derivative exists along any vector v, and one has

\nabla_{\bold{v}}{f}(\bold{x}) = \nabla f(\bold{x}) \cdot \bold{v}

where the $\nabla$ on the right denotes the gradient and $\cdot$ is the dot product.^[3] Intuitively, the directional derivative of f at a point x represents the rate of change of f with respect to time when moving past x at velocity v.

Variation using only direction of vector for Euclidean space

The angle α between the tangent A and the horizontal will be maximum if the cutting plane contains the direction of the gradient A.

Some authors^[4] define the directional derivative to be with respect to an arbitrary nonzero vector v after normalization, thus being independent of its magnitude and depending only on its direction.^[5]

This definition gives the rate of increase of f per unit of distance moved in the given direction. In this case, one has

\nabla_{\bold{v}}{f}(\bold{x}) = \lim_{h \rightarrow 0}{\frac{f(\bold{x} + h\bold{v}) - f(\bold{x})}{h|\bold{v}|}},

or in case f is differentiable at x,

\nabla_{\bold{v}}{f}(\bold{x}) = \nabla f(\bold{x}) \cdot \frac{\bold{v}}{|\bold{v}|} .

This definition is not equivalent with the one above except when v is a unit vector.

Notation

Directional derivatives can be also denoted by:

\nabla_{\bold{v}}{f}(\bold{x}) \sim \frac{\partial{f(\bold{x})}}{\partial{v}} \sim f'_\mathbf{v}(\bold{x}) \sim D_\bold{v}f(\bold{x}) \sim \partial_\bold{v}f(\bold{x}) \sim \mathbf{v}\cdot{\nabla f(\bold{x})} \sim \bold{v}\cdot \frac{\partial f(\bold{x})}{\partial\bold{x}}

where v is a parameterization of a curve to which v is tangent and which determines its magnitude.

Properties

Many of the familiar properties of the ordinary derivative hold for the directional derivative. These include, for any functions f and g defined in a neighborhood of, and differentiable at, p:

sum rule:
$\nabla_{\bold{v}} (f + g) = \nabla_{\bold{v}} f + \nabla_{\bold{v}} g$
constant factor rule: For any constant c,
$\nabla_{\bold{v}} (cf) = c\nabla_{\bold{v}} f$
product rule (or Leibniz's rule):
$\nabla_{\bold{v}} (fg) = g\nabla_{\bold{v}} f + f\nabla_{\bold{v}} g$
chain rule: If g is differentiable at p and h is differentiable at g(p), then
$\nabla_{\bold{v}}(h\circ g)(\bold{p}) = h'(g(\bold{p})) \nabla_{\bold{v}} g (\bold{p})$

In differential geometry

Let M be a differentiable manifold and p a point of M. Suppose that f is a function defined in a neighborhood of p, and differentiable at p. If v is a tangent vector to M at p, then the directional derivative of f along v, denoted variously as $d f (v)$ (see Exterior derivative), $\nabla_{\bold{v}} f(\bold{p})$ (see Covariant derivative), $L_{\bold{v}} f(\bold{p})$ (see Lie derivative), or ${\bold{v}}_{\bold{p}}(f)$ (see Tangent space § Definition via derivations), can be defined as follows. Let γ : [−1,1] → M be a differentiable curve with γ(0) = p and γ′(0) = v. Then the directional derivative is defined by

\nabla_{\bold{v}} f(\bold{p}) = \left.\frac{d}{d\tau} f\circ\gamma(\tau)\right|_{\tau=0}

This definition can be proven independent of the choice of γ, provided γ is selected in the prescribed manner so that γ′(0) = v.

The Lie derivative

The Lie derivative of a vector field $\scriptstyle W^\mu(x)$ along a vector field $\scriptstyle V^\mu(x)$ is given by the difference of two directional derivatives (with vanishing torsion):

\mathcal{L}_V W^\mu=(V\cdot\nabla) W^\mu-(W\cdot\nabla) V^\mu

In particular, for a scalar field $\scriptstyle \phi(x)$ , the Lie derivative reduces to the standard directional derivative:

\mathcal{L}_V \phi=(V\cdot\nabla) \phi

The Riemann tensor

Directional derivatives are often used in introductory derivations of the Riemann curvature tensor. Consider a curved rectangle with an infinitesimal vector δ along one edge and δ′ along the other. We translate a covector S along δ then δ′ and then subtract the translation along δ′ and then δ. Instead of building the directional derivative using partial derivatives, we use the covariant derivative. The translation operator for δ is thus

1+\sum_\nu \delta^\nu D_\nu=1+\delta\cdot D

and for δ′

1+\sum_\mu \delta'^\mu D_\mu=1+\delta'\cdot D

The difference between the two paths is then

(1+\delta'\cdot D)(1+\delta\cdot D)S^\rho-(1+\delta\cdot D)(1+\delta'\cdot D)S^\rho=\sum_{\mu,\nu}\delta'^\mu \delta^\nu[D_\mu,D_\nu]S_\rho

It can be argued^[6] that the noncommutativity of the covariant derivatives measures the curvature of the manifold:

[D_\mu,D_\nu]S_\rho=\pm \sum_\sigma R^\sigma_{\rho\mu\nu}S_\sigma

with R the Riemann tensor of course and the sign depending on the sign convention of the author.

In group theory

Translations

In the Poincaré algebra, we can define an infinitesimal translation operator P as

\mathbf{P}=i\nabla

(the i ensures that P is a self-adjoint operator) For a finite displacement λ, the unitary Hilbert space representation for translations is^[7]

U(\boldsymbol{\lambda})=\exp\left(-i\boldsymbol{\lambda}\cdot\mathbf{P}\right)

By using the above definition of the infinitesimal translation operator, we see that the finite translation operator is an exponentiated directional derivative:

U(\boldsymbol{\lambda})=\exp\left(\boldsymbol{\lambda}\cdot\nabla\right)

This is a translation operator in the sense that it acts on multivariable functions f(x) as

U(\boldsymbol{\lambda}) f(\mathbf{x})=\exp\left(\boldsymbol{\lambda}\cdot\nabla\right) f(\mathbf{x})=f(\mathbf{x}+\boldsymbol{\lambda})

Proof of the last equation

In standard single-variable calculus, the derivative of a smooth function f(x) is defined by (for small ε)

\frac{df}{dx}=\frac{f(x+\epsilon)-f(x)}{\epsilon}

This can be rearranged to find f(x+ε):

f(x+\epsilon)=f(x)+\epsilon \,\frac{df}{dx}=\left(1+\epsilon\,\frac{d}{dx}\right)f(x)

It follows that $[1+\epsilon\,(d/dx)]$ is a translation operator. This is instantly generalized^[8] to multivariable functions f(x)

f(\mathbf{x}+\boldsymbol{\epsilon})=\left(1+\boldsymbol{\epsilon}\cdot\nabla\right)f(\mathbf{x})

Here $\boldsymbol{\epsilon}\cdot\nabla$ is the directional derivative along the infinitesimal displacement ε. We have found the infinitesimal version of the translation operator:

U(\boldsymbol{\epsilon})=1+\boldsymbol{\epsilon}\cdot\nabla

It is evident that the group multiplication law^[9] U(g)U(f)=U(gf) takes the form

U(\mathbf{a})U(\mathbf{b})=U(\mathbf{a+b})

So suppose that we take the finite displacement λ and divide it into N parts (N→∞ is implied everywhere), so that λ/N=ε. In other words,

\boldsymbol{\lambda}=N\boldsymbol{\epsilon}

Then by applying U(ε) N times, we can construct U(λ):

[U(\boldsymbol{\epsilon})]^N=U(N\boldsymbol{\epsilon})=U(\boldsymbol{\lambda})

We can now plug in our above expression for U(ε):

[U(\boldsymbol{\epsilon})]^N=\left[1+\boldsymbol{\epsilon}\cdot\nabla\right]^N=\left[1+\frac{\boldsymbol{\lambda}\cdot\nabla}{N}\right]^N

Using the identity^[10]

\exp(x)=\left[1+\frac{x}{N}\right]^N

we have

U(\boldsymbol{\lambda})=\exp\left(\boldsymbol{\lambda}\cdot\nabla\right)

And since U(ε)f(x)=f(x+ε) we have

[U(\boldsymbol{\epsilon})]^Nf(\mathbf{x})=f(\mathbf{x}+N\boldsymbol{\epsilon})=f(\mathbf{x}+\boldsymbol{\lambda})=U(\boldsymbol{\lambda})f(\mathbf{x})=\exp\left(\boldsymbol{\lambda}\cdot\nabla\right)f(\mathbf{x})

Q.E.D.

As a technical note, this procedure is only possible because the translation group forms an Abelian subgroup (Cartan subalgebra) in the Poincaré algebra. In particular, the group multiplication law U(a)U(b)=U(a+b) should not be taken for granted. We also note that Poincaré is a connected Lie group. It is a group of transformations T(ξ) that are described by a continuous set of real parameters $\scriptstyle \xi^a$ . The group multiplication law takes the form

T(\bar{\xi})T(\xi)=T(f(\bar{\xi},\xi))

Taking $\scriptstyle \xi^a$ =0 as the coordinates of the identity, we must have

f^a(\xi,0)=f^a(0,\xi)=\xi^a

The actual operators on the Hilbert space are represented by unitary operators U(T(ξ)). In the above notation we suppressed the T; we now write U(λ) as U(P(λ)). For a small neighborhood around the identity, the power series representation

U(T(\xi))=1+i\sum_a\xi^a t_a+\frac{1}{2}\sum_{b,c}\xi^b\xi^c t_{bc}+\cdots

is quite good. Suppose that U(T(ξ)) form a non-projective representation, i.e. that

U(T(\bar{\xi}))U(T(\xi))=U(T(f(\bar{\xi},\xi)))

The expansion of f to second power is

f^a(\bar{\xi},\xi)=\xi^a+\bar{\xi}^a+\sum_{b,c}f^{abc}\bar{\xi}^b\xi^c

After expanding the representation multiplication equation and equating coefficients, we have the nontrivial condition

t_{bc}=-t_b t_c-i\sum_a f^{abc}t_a

Since $\scriptstyle t_{ab}$ is by definition symmetric in its indices, we have the standard Lie algebra commutator:

[t_b, t_c]=i\sum_a(-f^{abc}+f^{acb})t_a=i\sum_a C^{abc}t_a

with C the structure constant. The generators for translations are partial derivative operators, which commute:

\left[\frac{\partial}{\partial x^b},\frac{\partial }{\partial x^c}\right]=0

This implies that the structure constants vanish and thus the quadratic coefficients in the f expansion vanish as well. This means that f is simply additive:

f^a_\text{abelian}(\bar{\xi},\xi)=\xi^a+\bar{\xi}^a

and thus for abelian groups,

U(T(\bar{\xi}))U(T(\xi))=U(T(\bar{\xi}+\xi))

Q.E.D.

Rotations

The rotation operator also contains a directional derivative. The rotation operator for an angle θ, i.e. by an amount θ=|θ| about an axis parallel to $\scriptstyle \hat{\theta}$ =θ/θ is

U(R(\boldsymbol{\theta}))=\exp(-i\boldsymbol{\theta}\cdot\mathbf{L})

Here L is the vector operator that generates SO(3):

\mathbf{L}=\begin{pmatrix} 0& 0 & 0\\ 0& 0 & 1\\ 0& -1 & 0 \end{pmatrix}\mathbf{i}+\begin{pmatrix} 0 &0 & -1\\ 0& 0 &0 \\ 1 & 0 & 0 \end{pmatrix}\mathbf{j}+\begin{pmatrix} 0&1 &0 \\ -1&0 &0 \\ 0 & 0 & 0 \end{pmatrix}\mathbf{k}

It may be shown geometrically that an infinitesimal right-handed rotation changes the position vector x by

\mathbf{x}\rightarrow \mathbf{x}-\delta\boldsymbol{\theta}\times\mathbf{x}

So we would expect under infinitesimal rotation:

U(R(\delta\boldsymbol{\theta}))f(\mathbf{x})=f(\mathbf{x}-\delta\boldsymbol{\theta}\times\mathbf{x})=f(\mathbf{x})-(\delta\boldsymbol{\theta}\times\mathbf{x})\cdot\nabla f

It follows that

U(R(\delta\boldsymbol{\theta}))=1-(\delta\boldsymbol{\theta}\times\mathbf{x})\cdot\nabla

Following the same exponentiation procedure as above, we arrive at the rotation operator in the position basis, which is an exponentiated directional derivative:^[11]

U(R(\boldsymbol{\theta}))=\exp(-(\boldsymbol{\theta}\times\mathbf{x})\cdot\nabla)

Normal derivative

A normal derivative is a directional derivative taken in the direction normal (that is, orthogonal) to some surface in space, or more generally along a normal vector field orthogonal to some hypersurface. See for example Neumann boundary condition. If the normal direction is denoted by $\bold{n}$ , then the directional derivative of a function f is sometimes denoted as $\frac{ \partial f}{\partial n}$ . In other notations

\frac{ \partial f}{\partial n} = \nabla f(\bold{x}) \cdot \bold{n} = \nabla_{\bold{n}}{f}(\bold{x}) = \frac{\partial f}{\partial \bold{x}}\cdot\bold{n} = Df(\bold{x})[\bold{n}]

In the continuum mechanics of solids

Several important results in continuum mechanics require the derivatives of vectors with respect to vectors and of tensors with respect to vectors and tensors.^[12] The directional directive provides a systematic way of finding these derivatives.

The definitions of directional derivatives for various situations are given below. It is assumed that the functions are sufficiently smooth that derivatives can be taken.

Derivatives of scalar valued functions of vectors

Let $f(\mathbf{v})$ be a real valued function of the vector $\mathbf {v}$ . Then the derivative of $f(\mathbf{v})$ with respect to $\mathbf {v}$ (or at $\mathbf {v}$ ) in the direction $\mathbf {u}$ is defined as

\frac{\partial f}{\partial \mathbf{v}}\cdot\mathbf{u} = Df(\mathbf{v})[\mathbf{u}] = \left[\frac{d }{d \alpha}~f(\mathbf{v} + \alpha~\mathbf{u})\right]_{\alpha = 0}

for all vectors $\mathbf {u}$ .

Properties:

If $f(\mathbf{v}) = f_1(\mathbf{v}) + f_2(\mathbf{v})$ then $\frac{\partial f}{\partial \mathbf{v}}\cdot\mathbf{u} = \left(\frac{\partial f_1}{\partial \mathbf{v}} + \frac{\partial f_2}{\partial \mathbf{v}}\right)\cdot\mathbf{u}$
If $f(\mathbf{v}) = f_1(\mathbf{v})~ f_2(\mathbf{v})$ then $\frac{\partial f}{\partial \mathbf{v}}\cdot\mathbf{u} = \left(\frac{\partial f_1}{\partial \mathbf{v}}\cdot\mathbf{u}\right)~f_2(\mathbf{v}) + f_1(\mathbf{v})~\left(\frac{\partial f_2}{\partial \mathbf{v}}\cdot\mathbf{u} \right)$
If $f(\mathbf{v}) = f_1(f_2(\mathbf{v}))$ then $\frac{\partial f}{\partial \mathbf{v}}\cdot\mathbf{u} = \frac{\partial f_1}{\partial f_2}~\frac{\partial f_2}{\partial \mathbf{v}}\cdot\mathbf{u}$

Derivatives of vector valued functions of vectors

Let $\mathbf{f}(\mathbf{v})$ be a vector valued function of the vector $\mathbf {v}$ . Then the derivative of $\mathbf{f}(\mathbf{v})$ with respect to $\mathbf {v}$ (or at $\mathbf {v}$ ) in the direction $\mathbf {u}$ is the second-order tensor defined as

\frac{\partial \mathbf{f}}{\partial \mathbf{v}}\cdot\mathbf{u} = D\mathbf{f}(\mathbf{v})[\mathbf{u}] = \left[\frac{d }{d \alpha}~\mathbf{f}(\mathbf{v} + \alpha~\mathbf{u})\right]_{\alpha = 0}

for all vectors $\mathbf {u}$ .

Properties:

If $\mathbf{f}(\mathbf{v}) = \mathbf{f}_1(\mathbf{v}) + \mathbf{f}_2(\mathbf{v})$ then $\frac{\partial \mathbf{f}}{\partial \mathbf{v}}\cdot\mathbf{u} = \left(\frac{\partial \mathbf{f}_1}{\partial \mathbf{v}} + \frac{\partial \mathbf{f}_2}{\partial \mathbf{v}}\right)\cdot\mathbf{u}$
If $\mathbf{f}(\mathbf{v}) = \mathbf{f}_1(\mathbf{v})\times\mathbf{f}_2(\mathbf{v})$ then $\frac{\partial \mathbf{f}}{\partial \mathbf{v}}\cdot\mathbf{u} = \left(\frac{\partial \mathbf{f}_1}{\partial \mathbf{v}}\cdot\mathbf{u}\right)\times\mathbf{f}_2(\mathbf{v}) + \mathbf{f}_1(\mathbf{v})\times\left(\frac{\partial \mathbf{f}_2}{\partial \mathbf{v}}\cdot\mathbf{u} \right)$
If $\mathbf{f}(\mathbf{v}) = \mathbf{f}_1(\mathbf{f}_2(\mathbf{v}))$ then $\frac{\partial \mathbf{f}}{\partial \mathbf{v}}\cdot\mathbf{u} = \frac{\partial \mathbf{f}_1}{\partial \mathbf{f}_2}\cdot\left(\frac{\partial \mathbf{f}_2}{\partial \mathbf{v}}\cdot\mathbf{u} \right)$

Derivatives of scalar valued functions of second-order tensors

Let $f(\boldsymbol{S})$ be a real valued function of the second order tensor ${\boldsymbol {S}}$ . Then the derivative of $f(\boldsymbol{S})$ with respect to ${\boldsymbol {S}}$ (or at ${\boldsymbol {S}}$ ) in the direction $\boldsymbol{T}$ is the second order tensor defined as

\frac{\partial f}{\partial \boldsymbol{S}}:\boldsymbol{T} = Df(\boldsymbol{S})[\boldsymbol{T}] = \left[\frac{d }{d \alpha}~f(\boldsymbol{S} + \alpha\boldsymbol{T})\right]_{\alpha = 0}

for all second order tensors $\boldsymbol{T}$ .

Properties:

If $f(\boldsymbol{S}) = f_1(\boldsymbol{S}) + f_2(\boldsymbol{S})$ then $\frac{\partial f}{\partial \boldsymbol{S}}:\boldsymbol{T} = \left(\frac{\partial f_1}{\partial \boldsymbol{S}} + \frac{\partial f_2}{\partial \boldsymbol{S}}\right):\boldsymbol{T}$
If $f(\boldsymbol{S}) = f_1(\boldsymbol{S})~ f_2(\boldsymbol{S})$ then $\frac{\partial f}{\partial \boldsymbol{S}}:\boldsymbol{T} = \left(\frac{\partial f_1}{\partial \boldsymbol{S}}:\boldsymbol{T}\right)~f_2(\boldsymbol{S}) + f_1(\boldsymbol{S})~\left(\frac{\partial f_2}{\partial \boldsymbol{S}}:\boldsymbol{T} \right)$
If $f(\boldsymbol{S}) = f_1(f_2(\boldsymbol{S}))$ then $\frac{\partial f}{\partial \boldsymbol{S}}:\boldsymbol{T} = \frac{\partial f_1}{\partial f_2}~\left(\frac{\partial f_2}{\partial \boldsymbol{S}}:\boldsymbol{T} \right)$

Derivatives of tensor valued functions of second-order tensors

Let $\boldsymbol{F}(\boldsymbol{S})$ be a second order tensor valued function of the second order tensor ${\boldsymbol {S}}$ . Then the derivative of $\boldsymbol{F}(\boldsymbol{S})$ with respect to ${\boldsymbol {S}}$ (or at ${\boldsymbol {S}}$ ) in the direction $\boldsymbol{T}$ is the fourth order tensor defined as

\frac{\partial \boldsymbol{F}}{\partial \boldsymbol{S}}:\boldsymbol{T} = D\boldsymbol{F}(\boldsymbol{S})[\boldsymbol{T}] = \left[\frac{d }{d \alpha}~\boldsymbol{F}(\boldsymbol{S} + \alpha\boldsymbol{T})\right]_{\alpha = 0}

for all second order tensors $\boldsymbol{T}$ .

Properties:

If $\boldsymbol{F}(\boldsymbol{S}) = \boldsymbol{F}_1(\boldsymbol{S}) + \boldsymbol{F}_2(\boldsymbol{S})$ then $\frac{\partial \boldsymbol{F}}{\partial \boldsymbol{S}}:\boldsymbol{T} = \left(\frac{\partial \boldsymbol{F}_1}{\partial \boldsymbol{S}} + \frac{\partial \boldsymbol{F}_2}{\partial \boldsymbol{S}}\right):\boldsymbol{T}$
If $\boldsymbol{F}(\boldsymbol{S}) = \boldsymbol{F}_1(\boldsymbol{S})\cdot\boldsymbol{F}_2(\boldsymbol{S})$ then $\frac{\partial \boldsymbol{F}}{\partial \boldsymbol{S}}:\boldsymbol{T} = \left(\frac{\partial \boldsymbol{F}_1}{\partial \boldsymbol{S}}:\boldsymbol{T}\right)\cdot\boldsymbol{F}_2(\boldsymbol{S}) + \boldsymbol{F}_1(\boldsymbol{S})\cdot\left(\frac{\partial \boldsymbol{F}_2}{\partial \boldsymbol{S}}:\boldsymbol{T} \right)$
If $\boldsymbol{F}(\boldsymbol{S}) = \boldsymbol{F}_1(\boldsymbol{F}_2(\boldsymbol{S}))$ then $\frac{\partial \boldsymbol{F}}{\partial \boldsymbol{S}}:\boldsymbol{T} = \frac{\partial \boldsymbol{F}_1}{\partial \boldsymbol{F}_2}:\left(\frac{\partial \boldsymbol{F}_2}{\partial \boldsymbol{S}}:\boldsymbol{T} \right)$
If $f(\boldsymbol{S}) = f_1(\boldsymbol{F}_2(\boldsymbol{S}))$ then $\frac{\partial f}{\partial \boldsymbol{S}}:\boldsymbol{T} = \frac{\partial f_1}{\partial \boldsymbol{F}_2}:\left(\frac{\partial \boldsymbol{F}_2}{\partial \boldsymbol{S}}:\boldsymbol{T} \right)$

Notes

↑ R. Wrede; M.R. Spiegel (2010). Advanced Calculus (3rd ed.). Schaum's Outline Series. ISBN 978-0-07-162366-7.
↑ The applicability extends to functions over spaces without a metric and to differentiable manifolds, such as in general relativity.
↑ If the dot product is undefined, the gradient is also undefined; however, for differentiable f, the directional derivative is still defined, and a similar relation exists with the exterior derivative.
↑ Thomas, George B. Jr.; and Finney, Ross L. (1979) Calculus and Analytic Geometry, Addison-Wesley Publ. Co., fifth edition, p. 593.
↑ This typically assumes a Euclidean space – for example, a function of several variables typically has no definition of the magnitude of a vector, and hence of a unit vector.
↑ Zee, A. (2013). Einstein gravity in a nutshell. Princeton: Princeton University Press. p. 341. ISBN 9780691145587.
↑ Weinberg, Steven (1999). The quantum theory of fields (Reprinted (with corr.). ed.). Cambridge [u.a.]: Cambridge Univ. Press. ISBN 9780521550017.
↑ Zee, A. (2013). Einstein gravity in a nutshell. Princeton: Princeton University Press. ISBN 9780691145587.
↑ Mexico, Kevin Cahill, University of New (2013). Physical mathematics (Repr. ed.). Cambridge: Cambridge University Press. ISBN 978-1107005211.
↑ Edwards, Ron Larson, Robert, Bruce H. (2010). Calculus of a single variable (9th ed.). Belmont: Brooks/Cole. ISBN 9780547209982.
↑ Shankar, R. (1994). Principles of quantum mechanics (2nd ed.). New York: Kluwer Academic / Plenum. p. 318. ISBN 9780306447907.
↑ J. E. Marsden and T. J. R. Hughes, 2000, Mathematical Foundations of Elasticity, Dover.

References

Hildebrand, F. B. (1976). Advanced Calculus for Applications. Prentice Hall. ISBN 0-13-011189-9.
K.F. Riley; M.P. Hobson; S.J. Bence (2010). Mathematical methods for physics and engineering. Cambridge University Press. ISBN 978-0-521-86153-3.

External links

Directional derivatives at MathWorld.
Directional derivative at PlanetMath.

This article is issued from Wikipedia - version of the 5/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Directional derivative

Definition

Variation using only direction of vector for Euclidean space

Notation

Properties

In differential geometry

The Lie derivative

The Riemann tensor

In group theory

Translations

Rotations

Normal derivative

In the continuum mechanics of solids

Derivatives of scalar valued functions of vectors

Derivatives of vector valued functions of vectors

Derivatives of scalar valued functions of second-order tensors

Derivatives of tensor valued functions of second-order tensors

See also

Notes

References

External links