Wainhill Crossing Halt railway station

Wainhill Crossing Halt

Wainhill Crossing Halt in 1991 following restoration by the Chinnor & Princes Risborough Railway.
Location
Place Lower Wainhill, nr Chinnor
Area South Oxfordshire
Grid reference SP765013
Operations
Original company Great Western Railway
Post-grouping Great Western Railway
Western Region of British Railways
Platforms 1
History
1 August 1925[1] Station opened
1 July 1957[2] Closed
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z
UK Railways portal

Wainhill Crossing Halt was a halt on the Watlington and Princes Risborough Railway which the Great Western Railway opened in 1925 to serve the Oxfordshire hamlet of Wainhill. The opening of the halt was part of a GWR attempt to encourage more passengers on the line at a time when competition from bus services was drawing away patronage.

History

Opened in 1925, the halt - the last station to open on the line - sought to encourage passenger traffic in the face of increased competition from buses.[3] It was situated to the south of a level crossing over an unclassified road leading to Lower Wainhill and Hempton Wainhill. The lane saw very occasional traffic as it was unsuitable for motor vehicles and only served nine or ten houses on the eastern side of the Watlington and Princes Risborough Railway. A modest crossing keeper's cottage had been provided by the railway company which comprised two ground floor rooms and one bedroom on the first floor; there was no mains water, gas or electricity.[4] The crossing keeper was responsible for keeping the lamps alight on the gates and, once the station had opened, trimming and lighting the two oil hurricane lamps hung on posts to illuminate the single platform.[5]

Following the withdrawal of passenger services in 1957, the line through Wainhill Crossing remained open until July 1990 for the purposes of coal, gypsum and cement movements to and from the Rugby Portland Cement Company's factory near Chinnor.[6] Negotiating Wainhill Crossing, by this time unmanned, required trains to be brought to a halt by the crossing whilst a crew member opened and closed the gates; this was particularly awkward as the line descends at a 1 in 73 gradient here and was subject to a speed restriction of 5 mph.[7]

Preceding station Historical railways Following station
Bledlow Bridge Halt
Line open, station closed
  Great Western Railway
Watlington and Princes Risborough Railway
  Chinnor
Line and station open

Present day

Wainhill Crossing Halt has been rebuilt by the Chinnor and Princes Risborough Railway which has reopened the line through the station. The halt is not however open to passengers. Wainhill Crossing is manned when services are running and a train must stop or slow down unless a green flag is shown by the crossing keeper.[8] In accordance with the Transport and Works Order granted to the CPPR for the operation of services, the crossing gates must be kept closed and locked across the railway except when services are crossing. The gates must also be kept conspicuously white with red reflectors and lamps must be used when it gets dark.[9] The crossing keeper's cottage is still standing and is in private ownership.[10]

References

  1. Butt, 1995, page 239
  2. Clinker, 1978, page 140
  3. Oppitz, 2000, page 22
  4. Karau and Turner, 1998, pages 116-117
  5. Karau and Turner, 1998, page 122
  6. Mitchell and Smith, 2003, plate XXI
  7. Simpson, 2001, page 130
  8. Chinnor & Princes Risborough Railway, 2009 Timetable.
  9. Schedule 2, The Chinnor and Princes Risborough Railway Order 1994, S.I. 1994/1803.
  10. Mitchell and Smith, 2003, plate 104

Sources

Coordinates: 51°42′20″N 0°53′35″W / 51.7055°N 0.8931°W / 51.7055; -0.8931

This article is issued from Wikipedia - version of the 8/4/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.