Vu+

The Vu+ (pronounced VuPlus), is a series of Linux-powered DVB satellite, terrestrial digital television receivers (set-top box), produced by Korean multimedia brand Ceru Company Ltd. (a subsidiary of Marusys Co., Ltd.).

History and description

All currently Vu+ hardware set-top boxes are MIPS-powered and uses Enigma2 image based software as firmware.

Its firmware is officially user-upgradable, since it is a Linux-based computer, as opposed to third-party "patching" of alternate receivers. Firmware is based on Enigma 2, which was originally designed for Dreambox by Dream Multimedia. All units support Conax conditional access (CA) system, with software-emulated conditional-access modules (CAMs) available for many alternate CA systems. The built-in Ethernet interface allows networked computers to access the recordings on the internal hard disks and stream live picture from the tuners. It also enables the receiver to store digital copies of DVB MPEG transport streams on networked filesystems or broadcast the streams as IPTV to VideoLAN and XBMC Media Center clients. Unlike many PC based PVR systems that use free-to-air type of DVB receiver cards, the built-in conditional access allows receiving and storing encrypted content.

In the beginning of September in 2011, Dream Multimedia obtained a temporary injunction against the Satco Europe GmbH company for using their "Enigma 2" name in an advertising flyer to promote the Linux operating system installed on the Vu+ set-top-boxes, as "Enigma"(2) is a registered trademark name of Dream Multimedia GmbH.[1]

Models

Vu+ Duo back
Vu+ Duo front
Vu+ UltimoUltimo 4kUnoUno 4kSoloSolo2Solo SESolo SE V2 Solo 4KDuoDuo2Zero
Production Discontinued Announced Discontinued Available Discontinued Available Available Available Available Discontinued Available Available
Life cycle 2011 - 2013 2016 Oct. 2011 - 2014 2016 Dec.- 2010 - 2013 2012- 2014- 2015- 2015- 2010 - 2013 2012- 2014-
SoC BCM7413 BCM7444S BCM7413 BCM7252S BCM7325 BCM7356 BCM7429 BCM7429 BCM7376 BCM7335 BCM7424 BCM7362
CPU type MIPSARMMIPSARMMIPSMIPSMIPSMIPSARM MIPSMIPSMIPS
CPU (MHz) 2x400 4x1500 2x400 2x1700 333* 2x1300 2x1300 2x1300 2x1500 400 2x1300 742
RAM (MiB) 512 3072 512 2048 256 1024 1024 1024 2048 384 2048 512
Flash (MiB) 1024 4096 128 4096 128 256 256 512 4096 128 1024 256
Flash type NAND eMMCNAND eMMCNAND NAND NAND NAND eMMC NAND NAND NAND
Default OS Enigma2 Enigma2 Enigma2 Enigma2 Enigma2 Enigma2 Enigma2 Enigma2 Enigma2 Enigma2
DVB3 ×P&P(S2/C/T) 2xP&P Dual FBC DVB-S2 or DVB-C + 1xP&P Dual DVB-S2 or Dual DVB-C/T21×P&P(S2/C/T)1xP&P Dual FBC DVB-S2 or DVB-C 1×S2 2×S2 1xS2/C/T/T2 1xS2/C/T/T2 2×S2 + 1×P&P(S2/C/T) 2×S2 2×P&P(S2/C/T) 1×S2
HDTV
UHDTV 4K 4K 4K
3D TV
PiP Yes/HD Yes/HD
Common Interface 2 2 2 1 2 1 1 1 1 2 2 0
Smart card 2 2 2 1 1 2 1 1 2 2 2 1
USB3 x 2.0 2x3.0 + 1x2.0 3 x 2.0 2 x 3.0 2 x 2.0 3 x 2.0 2 x 2.0 2 x 2.0 2x3.0 + 1x2.0 3 x 2.0 3 x 2.0 2 x 2.0
RS 232 *** ***
LAN (Mbit/s)100 1000 + WIFI N/AC 2.5/5 + BT 4.0 100 1000 100 1000 100 100 1000 100 1000 + WIFI-N 100
HDD 2.5/3.5" 2.5/3.5" 2.5/3.5" 2.5" 2.5" Detachable 3.5" 2.5/3.5"
ATA SATA II SATA II SATA III SATA III SATA II SATA III
eSATA
SCART 1 1 1 1 2 1
HDMI 1.4 2.0 OUT/IN 1.4 2.0 1.4 1.4 1.4 1.4 2.0 1.4 1.4 1.4
Display graphical VFD LCD (4.0") VFD Status LED VFD Status LED Status LED LCD (3.5") VFD LCD/VFD Status LED
LNB pass-thru
Other connectors 1 x YPrPb 1 x YPrPb 1 x YPrPb 1 x YPrPb Remote IR
Dimensions, WxHxD (mm) 380 x 60 x 290 380 x 70 x 278 340 x 60 x 272 230 x 41 x 170 280 x 50 x 200280 x 50 x 200211 x 45 x 185211 x 45 x 185315 x 65 x 255380 x 60 x 280380 x 60 x 290160 x 30 x 145

Triple tuner

Twin tuner

Single Tuner

XBMC4STB project by Vu+

In September 2011, at "Vu+ Day", in Amsterdam, it was publicly announced that the generation of Vu+ DVB satellite receivers to be released publicly in the end of 2012 would be ARM-powered and use XBMC Media Center (now renamed to Kodi Entertainment System) software for its main GUI, a OpenEmbedded-based development-project that they call "XBMC4STB" (XBMC for Set-Top-Boxes), with beta releases of both the software and new hardware said to be made available to XBMC developers before they will be release to the public.[3]

However it took two more years before a native source port of XBMC was available on the newer Vu+ (VuPlus) based set-top box models SoloSe, Solo2, and Duo2, all of which are MIPS instead ARM based. XBMC will not be made available for older Vu+ set-top boxes due to hardware limitations with missing OpenGL graphics acceleration.[4][5]

Open Black Hole

"Open Black Hole" is an open source project for making unofficial third-party OpenPLi based images for newer Vu+ set-top boxes. Using the XBMC4STB software fork of Kodi/XBMC from Vu+, the images are designed as a hybrid integration between Kodi/XBMC media center software and Dreambox's Enigma2 PVR software scripts, forked from OpenPLi (based on OpenEmbedded Linux operating system for embedded systems), it is as such also fully compatible with PLi plugins and coding infrastructure. The project was first announced on the 25th of May 2015 and is maintained by the Black Hole Team, a team of independent developers of long popular community driven firmware images for Vu+-based set top-boxes, however these Open Black Hole project images is completely separate from the original Black Hole image for Vu+.[6][7][8]

PrismCube by Marusys

Another set-top box hardware, also using the XBMC4STB software fork of Kodi/XBMC, is the PrismCube set-top box, which is also produced by Vu+'s parent company, Marusys. Unlike Vu+, PrismCube is an ARM-architecture based DVB-S2 Twin-Tuner high-definition DVR/PVR that is only running native XBMC as its main media center GUI interface on-top of Linux for embedded systems.[9][10] Released in October 2013, the first hardware model is marketed as PrismCube Ruby in Europe, North Africa, and the Middle East, under different brand names such as Kasys, AB IPBox, and Openbox.[11]

The firmware image of PrismCube Ruby is based on OpenEmbedded-Linux, and uses Marusys's own PVR backend software that integrated itself into XBMC's GUI, so currently the PVR front-end GUI functions and features on PrismCube are not part of native XBMC core code, though they use the same skin texture elements to achieve some what similar look and feel interface, a ported fork which Marusys calls "XBMC4STB" (XBMC for Set-Top-Boxes), which is the same name that Vu+ have given to their XBMC port.[12][13][14] Third-party firmware images for PrismCube Ruby are also being developed by the Black Hole Team, a team of independent developers of long popular community driven firmware images for Vu+-based satellite receivers.[15][16]

See also

References

External links

Official

Image

This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.