Stits-Besler Executive

Stits-Besler Executive
Role Homebuilt aircraft
National origin United States of America
Designer Ray Stits
Introduction 1955
Number built 1
Unit cost
$6000 (1955)
Developed from Stits Playboy

The Stits-Besler Executive is a three place homebuilt aircraft designed by Ray Stits, as the Stits SA-4A Executive.[1]

Development

The project was initiated when William Besler of Besler Corp. contracted Ray Stits to design a 3 place homebuilt aircraft with folding wings.[2] Besler was an early aviation experimenter, who had mounted a steam engine of his own design on a Travel Air 2000 in 1933.

Design

The wings on the Executive fold aft and upward. Fuel tanks are embedded in the non-folding wing roots. The fuselage is welded steel tube with fabric covering. The ailerons are mounted in the center of the wing rather than the tips.

Operational history

The sole Executive, (registration no. N36K), has been used as a test bed for Besler designed engines; a 150 hp (112 kW) steam engine and a two cycle, four cylinder Vee rated at 100 hp (75 kW).[3]

Specifications (Stits-Besler Executive)

Data from Experimenter

General characteristics

Performance

See also

Related development


Notes

  1. "American airplanes: st - sz". Aerofiles.com. 2009-11-02. Retrieved 2011-04-06.
  2. "Stits-Besler Executive". Experimenter. March 1955.
  3. Experimenter: 6. April 1955. Missing or empty |title= (help)

References

Wikimedia Commons has media related to Stits-Besler Executive.
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.