Parking pawl

A parking pawl is a device fitted to a motor vehicle's automatic transmission in order for it to lock up the transmission. It is engaged when the transmission shift lever selector is placed in the Park position, which is always the first position (topmost on a column shift, frontmost on a floor shift) in all cars sold in the United States since 1965 (when the order was standardised by the Society of Automotive Engineers (SAE)) through SAE J915,[1] and in most other vehicles worldwide.

Design and operation

The parking pawl locks the transmission's output shaft to the transmission casing by engaging a pawl (a pin) that engages in a notched wheel on the shaft, stopping it (and thus the driven wheels) from rotating. The main components of a parking pawl mechanism are the parking gear, parking pawl, Actuator rod, cam collar, cam plate, pivot pin and parking pawl return spring. The mechanism assembly is designed so that the parking pawl tooth collides and overrides the parking gear teeth (ratchets) until a safe engagement speed for the vehicle is reached. Software controls are put in place to avoid this condition and engage the pawl only when the vehicle has come to a stand still.[2]

Applicable standards

Recommendations

Most vehicle manufacturers[3] and auto mechanics[4] do not recommend using the transmission's parking pawl as the sole means of securing a parked vehicle, instead recommending it should only be engaged after first applying the vehicle's parking brake. Constant use of only the parking pawl, especially when parking on a steep incline, means that driveline components, and transmission internals, are kept constantly under stress, and can cause wear and eventual failure of the parking pawl or transmission linkage. The pawl might also fail or break if the vehicle is pushed with sufficient force, if the parking brake is not firmly engaged. Replacement can be an expensive operation since it not only requires removing the transmission from the vehicle, it's usually the first component to be installed in the gearbox case during a complete overhaul rebuild.

It is highly inadvisable to use the parking pawl to stop a vehicle in motion. Modern parking pawls are connected to a safety mechanism that prevents the pawl from engaging unless the vehicle is stopped first. The pawl mechanism is generally not strong enough to stop a vehicle in motion, if it engages at all. Under that much stress, the pawl may simply break off in the transmission, leading to costly repairs.

See also

External links

References

  1. http://standards.sae.org/j915_196507/
  2. Jeyakumaran, Jeku; Zhang, Nong (2008). "Dynamic Analysis of an Automatic Transmission Parking Mechanism". University of Adelaide, Australia.(subscription required)
  3. "Chevy Cruze Owner's Manual". Chevrolet.com.
  4. "Driver's Ed Guru - Always set the parking brake". DriverSEdGuru.com
This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.