Jaguar AJ-V6 engine

This article is about Duratec-based 60° V6 engines. For AJ-V8-based 90° V6, see AJ126.
Jaguar AJ-V6
Overview
Manufacturer Jaguar Cars
Production 2000-2011
Combustion chamber
Configuration 60° V6
Displacement
  • 2,099 cc (128.1 cu in)
  • 2,495 cc (152.3 cu in)
  • 2,967 cc (181.1 cu in)
Cylinder bore
  • 81.6 mm (3.21 in)
  • 89.0 mm (3.50 in)
Piston stroke
  • 66.8 mm (2.63 in)
  • 79.5 mm (3.13 in)
Cylinder block alloy Aluminum
Cylinder head alloy Aluminum
Valvetrain DOHC
Compression ratio
  • 10.3:1
  • 10.75:1
Combustion
Fuel system Sequential multi-port fuel injection
Fuel type Gasoline
Oil system Wet sump
Cooling system Water-cooled
Chronology
Predecessor Jaguar AJ16
Successor Jaguar AJ126

The Jaguar AJ-V6 engine is a specialized version of Ford's Ford Duratec V6 engine. One notable addition is the use of variable valve timing, a feature also shared with Mazda's version of the engine. It is available in 2.1 L, 2.5 L and 3.0 L displacements.

Jaguar's AJ-V6 engine has an aluminium engine block and aluminium DOHC cylinder heads. It uses SFI fuel injection, has 4 valves per cylinder with VVT, features fracture-split forged powder metal connecting rods and a one-piece cast camshaft and has direct-acting mechanical bucket (DAMB) tappets, these design aspects differentiating the AJ-V6 from the Ford and Mazda versions.

AJ20

The AJ20 2.1 L (2099 cc) version has an 81.6 mm (3.2 in) bore and 66.8 mm (2.6 in) stroke. Although it displaces nearly 2.1 litres, it is marketed as a "2.0". It produces 157 hp (117 kW; 159 PS) and 148 lb·ft (201 N·m). The compression ratio is 10.75:1.

This engine is used in the following vehicles:

AJ25

The AJ25 is a 2.5 L (2495 cc/152 in³) version built in Ford's Cleveland, OH #2 factory. It shares the 2.1's 81.6 mm (3.2 in) bore and is stroked to 79.5 mm (3.1 in), the same as the 3.0. It delivers 192 hp (143 kW; 195 PS) at 6800 rpm with 178 lb·ft (241 N·m) of torque at 3000 rpm from 10.3:1 compression.

This engine is used in the following vehicles:

AJ30

The AJ30 is a 3.0 L (2967 cc) version and is the most common, especially considering the Duratec 30. It has an 89 mm (3.5 in) bore and shares the 2.5's 79.5 mm (3.1 in) stroke. In the X-Type, it produces 231 hp (172 kW; 234 PS) and 209 lb·ft (283 N·m). The Jaguar XF debuted a refined version of the AJ30 with continuously variable cam-phasing and variable geometry air intakes to increase power and broaden the powerband up to its 6800 rpm redline.

This engine is used in the following vehicles:

See also

Wikimedia Commons has media related to Jaguar AJ-V6 engine.
This article is issued from Wikipedia - version of the 2/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.