JST connector

2.50mm JST-XH top-entry (vertical) male PCB connectors

JST RCY connectors

JST connector is an electrical connector that is manufactured by J.S.T. Mfg. Co. (Japan Solderless Terminal).^[1] JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.^[2]^[3]

JST connectors are commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers, battery eliminator circuits, and radio controlled servos.^[4]

The term "JST" is commonly and incorrectly used as a vernacular term meaning a small white electrical connector mounted on PCBs inside products manufactured from Asia.

Connector series

JST manufactures a large number of series (families) of connectors.^[2] The PCB (wire-to-board) connectors are available in top (vertical) or side (horizontal) entry, and through-hole or surface-mount.

Wire-to-Board Connectors
JST Series	Pin-to-Pin Pitch	Pin Rows	Current (Amp)	Voltage (Volt)	Wire Size (AWG)	Shroud	Lock	Notes	Datasheet
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|VH ^[5]	3.96 mm (0.156 in)	1	10	250	22 to 16	Yes/No	Yes	Unshrouded seems to be more popular than shrouded.	JST VH
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|EH ^[6]	2.50 mm (0.098 in)	1	3	250	32 to 22	Yes	No		JST EH
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|XH ^[7]	2.50 mm (0.098 in)	1	3	250	30 to 22	Yes	No	Used by many R/C batteries. Not 0.1" pitch.	JST XH
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|PA ^[8]	2.00 mm (0.079 in)	1	3	250	28 to 22	Yes	Yes	Used by FMA Cellpro R/C battery chargers.	JST PA
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|PH ^[9]	2.00 mm (0.079 in)	1	2	100	32 to 24	Yes	No	Compatible with KR, KRD, CR series.^[10]^[11]^[12]	JST PH
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|ZH ^[13]	1.50 mm (0.059 in)	1	1	50	32 to 26	Yes	No	Compatible with ZR, ZM series.^[14]^[15]	JST ZH
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|GH ^[16]	1.25 mm (0.049 in)	1	1	50	30 to 26	Yes	Yes	Some people confuse with Molex PicoBlade.	JST GH
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|SH ^[17]	1.00 mm (0.039 in)	1	1	50	32 to 28	Yes	No	Compatible with SR, SZ series.^[18]	JST SH

Wire-to-Wire Connectors
JST Series	Pin-to-Pin Pitch	Pin Rows	Current (Amp)	Voltage (Volt)	Wire Size (AWG)	Features	Notes	Datasheet
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|RCY ^[19]	2.50 mm (0.098 in)	1	3	250	28 to 22	Locking	Used in radio control (R/C), also known as BEC or P connector. Commonly found on small models, toys, and small lipo packs.	JST RCY
style="background:#9F9;vertical-align:middle;text-align:center;" class="table-yes"\|SM ^[20]	2.50 mm (0.098 in)	1	3	250	28 to 22	Locking, High force	Used in some RGB LED decorative light strips.	JST SM

Connector soldering

Lithium polymer battery for Parrot AR.Drone with 4-pin JST-XH female connector (right, facing the camera) and 2-pin mini-Tamiya connector (left).^[21]

A majority of JST through-hole headers can't withstand the temperatures required for reflow soldering, because the plastic has a lower melting point since they were designed for wave soldering methods. Some JST surface-mount headers are designed to handle higher temperatures of reflow soldering.^[22]

Connector confusion on the internet

End-users and 3rd-party sellers on eBay often describe connectors by their wrong name thus perpetuating confusion of the exact series of a specific connector. Unfortunately, it is very common in blogs and websites to incorrectly name a specific connector only by the name of the manufacturer.

To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch; such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations.

The official J.S.T. Co. website has a tool which allows users to check certain models for their authenticity and specifications.^[23]

In recent years, it is preferred to use millimeter (mm) instead of inches for pin-to-pin pitch distance. Note: Some 2.50 mm parts are incorrectly sold on the internet as 2.54 mm (0.100 in), and the 1.25 mm parts as 1.27 mm (0.050 in).

References

External links

Wikimedia Commons has media related to JST connector.

Official

Other

This article is issued from Wikipedia - version of the 9/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.