Innogy Nordsee 1

Innogy Nordsee 1-2-3
Location of Innogy Nordsee 1-2-3 in Germany
Country Germany
Location North Sea,
Coordinates 53°58′44″N 6°48′50″E / 53.979°N 6.814°E / 53.979; 6.814Coordinates: 53°58′44″N 6°48′50″E / 53.979°N 6.814°E / 53.979; 6.814
Commission date 2015 (expected)
Construction cost €2.8 billion
Owner(s) Innogy
Wind farm
Type Offshore
Site area 100 km2 (39 sq mi)
Max. water depth 26–34 m (85–112 ft)
Distance from shore 40 km (25 mi)
Hub height 100 m (328 ft)
Rotor diameter 126 m (413 ft)
Power generation
Units operational 162 X 6.15 MW
Make and model REpower 6M
Nameplate capacity 996 MW
Innogy Nordsee 1-2-3's location in the wind farms of the German Bight

Innogy Nordsee 1-2-3 is a proposal for a large wind farm complex off Germany's coast. The planned offshore installation is to be built 40 kilometres (25 mi) north of the island of Juist, within an area of around 100 square kilometres (39 sq mi) and in water 26–34 metres (85–112 ft) deep. The project includes three wind farms: Innogy Nordsee 1 with 54 turbines, Innogy Nordsee 2 with 48 turbines, and Innogy Nordsee 3 with 60 turbines. In total, 162 wind turbines with a capacity of 6.15 megawatts (MW) will be used. The aim is to complete the wind farm in 2015 at a total investment of around €2.8 billion (US $3.72 billion).[1]

The Innogy Nordsee 1 project was originally developed by ENOVA. In 2008, it was acquired by RWE Innogy.[1] The construction permit for Innogy Nordsee 1 was issued on 4 April 2012.[2]

See also

References

  1. 1 2 RWE Innogy Acquires Rights To Build 960-MW Offshore Wind Farm, January 28, 2009
  2. ↑ Germany: RWE Receives Permit for Innogy Nordsee 1 Offshore Wind Farm, April 4, 2012
This article is issued from Wikipedia - version of the 10/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.