Hyperpolarized carbon-13 MRI

Hyperpolarized carbon-13 MRI is a functional medical imaging technique for probing perfusion and metabolism using injected substrates.

It is enabled by techniques for hyperpolarization of carbon-13-containing molecules using dynamic nuclear polarization and rapid dissolution to create an injectable solution.[1][2] Following the injection of a hyperpolarized substrate, metabolic activity can be mapped based on enzymatic conversion of the injected molecule. In contrast with other metabolic imaging methods such as positron emission tomography, hyperpolarized carbon-13 MRI provides chemical as well as spatial information, allowing this technique to be used to probe the activity of specific metabolic pathways. This has led to new ways of imaging disease. For example, metabolic conversion of hyperpolarized pyruvate into lactate is increasingly being used to image cancerous tissues via the Warburg effect.[3][4][5]

Hyperpolarization

While hyperpolarization of inorganic small molecules (like 3He and 129Xe) is generally achieved using spin-exchange optical pumping (SEOP), compounds useful for metabolic imaging (such as 13C or 15N) are typically hyperpolarized using dynamic nuclear polarization (DNP). DNP can be performed at operating temperatures of 1.1-1.2 K, and high magnetic fields (~4T).[6] The compounds are then thawed and dissolved to yield a room temperature solution containing hyperpolarized nuclei which can be injected.

Dissolution and Injection

Hyperpolarized samples of 13C pyruvic acid are typically dissolved in some form of aqueous solution containing various detergents and buffering reagents. For example, in a study detecting tumor response to etoposide treatment, the sample was dissolved in 40 mM HEPES, 94 mM NaOH, 30 mM NaCl, and 50 mg/L EDTA.[7]

Preclinical Models

Hyperpolarzied carbon-13 MRI is currently being developed as a potentially cost effective diagnostic and treatment progress tool in various cancers, including prostate cancer. Other potential uses include neuro-oncological applications such as the monitoring of real-time in vivo metabolic events.[8]

Clinical Trials

The majority of clinical studies utilizing 13C hyperpolarization are currently studying pyruvate metabolism in prostate cancer, testing reproducibility of the imaging data, as well as feasibility of acquiring time.[9]

Imaging Methods

Sequence of NMR spectra from a dynamic hyperpolarized carbon-13 MR imaging experiment in a rat model. This data set shows the evolution of magnetization in a single voxel in the rat's kidney. A strong peak from the hyperpolarized pyruvate injected in the experiment is evident, along with smaller peaks corresponding to the metabolites lactate, alanine and bicarbonate.

Spectroscopic Imaging

Spectroscopic imaging techniques enable chemical information to be extracted from hyperpolarized carbon-13 MRI experiments. The distinct chemical shift associated with each metabolite can be exploited to probe the exchange of magnetization between pools corresponding to each of the metabolites.

Metabolite-Selective Excitation

Using techniques for simultaneous spatial and spectral selective excitation, RF pulses can be designed to perturb metabolites individually.[10][11] This enables the encoding of metabolite-selective images without the need for spectroscopic imaging. This technique also allows different flip angles to be applied to each metabolite,[12] which enables pulse sequences to be designed that make optimal use of the limited polarization available for imaging.[13][14]

Dynamic imaging models

In contrast with conventional MRI, hyperpolarized experiments are inherently dynamic as images must be acquired as the injected substrate spreads through the body and is metabolized. This necessitates dynamical system modelling and estimation for quantifying metabolic reaction rates. A number of approaches exist for modeling the evolution of magnetization within a single voxel.

pyruvate lactate alanine
T1 ~46.9-65 s dependent on B0 field strength[15]
T2 (HCC Tumor) 0.9 ± 0.2 s[16] 1.2 ± 0.1 s[16]
T2 (Healthy Liver) 0.52 ± 0.03 s[16] 0.38 ± 0.05 s[16]

Two-Species model with Unidirectional flux

The simplest model of metabolic flux assumes unidirectional conversion of the injected substrate S to a product P. The rate of conversion is assumed to be governed by the reaction rate constant

 

 

 

 

(1)

Exchange of magnetization between the two species can then be modeled using the linear ordinary differential equation

where denotes the rate at which the transverse magnetization decays to thermal equilibrium polarization, for the product species P.

Two-Species model with Bidirectional flux

The unidirectional flux model can be extended to account for bidirectional metabolic flux with forward rate and backward rate

 

 

 

 

(2)

The differential equation describing the magnetization exchange is then

Effect of Radio-Frequency Excitation

Repeated radio-frequency (RF) excitation of the sample causes additional decay of the magnetization vector. For constant flip angle sequences, this effect can be approximated using a larger effective rate of decay computed as

where is the flip angle and is the repetition time.[17] Time-varying flip angle sequences can also be used, but require that the dynamics be modeled as a hybrid system with discrete jumps in the system state.[18]

Metabolism Mapping

The goal of many hyperpolarized carbon-13 MRI experiments is to map the activity of a particular metabolic pathway. Methods of quantifying the metabolic rate from dynamic image data include temporally integrating the metabolic curves, computing the definite integral referred to in pharmacokinetics as the area under the curve (AUC), and taking the ratio of integrals as a proxy for rate constants of interest.

Area-Under-the-Curve Ratio

Comparing the definite integral under the substrate and product metabolite curves has been proposed as an alternative to model-based parameter estimates as a method of quantifying metabolic activity. Under specific assumptions, the ratio

of area under the product curve AUC(P) to the area under the substrate curve AUC(S) is proportional to the forward metabolic rate .[19]

Rate Parameter Mapping

When the assumptions under which this ratio is proportional to are not met, or there is significant noise is the collected data, it is desirable to compute estimates of model parameters directly. When noise is independent and identically distributed and Gaussian, parameters can be fit using non-linear least squares estimation. Otherwise (for example if magnitude images with Rician-distributed noise are used), parameters can be estimated by maximum likelihood estimation. The spatial distribution of metabolic rates can be visualized by estimating metabolic rates corresponding to the time series from each voxel, and plotting a heat map of the estimated rates.

See also

References

  1. ↑ Jan H. Ardenkjær-Larsen; Björn Fridlund; Andreas Gram; Georg Hansson; Lennart Hansson; Mathilde H. Lerche; Rolf Servin; Mikkel Thaning; Klaes Golman (2003). "Increase in signal-to-noise ratio of > 10,000 times in liquid-state NMR". Proceedings of the National Academy of Sciences. 100: 10158–10163. doi:10.1073/pnas.1733835100.
  2. ↑ Klaes Golman; an H. Ardenkjær-Larsen; J. Stefan Petersson; Sven Månsson; Ib Leunbach (2003). "Molecular imaging with endogenous substances". Proceedings of the National Academy of Sciences. 100: 10435–10439. doi:10.1073/pnas.1733836100.
  3. ↑ Day, Sam E; Kettunen, Mikko I; Gallagher, Ferdia A; Hu, De-En; Lerche, Mathilde; Wolber, Jan; Golman, Klaes; Ardenkjaer-Larsen, Jan Henrik; Brindle, Kevin M (2007). "Detecting tumor response to treatment using hyperpolarized 13C magnetic resonance imaging and spectroscopy". Nature Medicine. 13: 1382–1387. doi:10.1038/nm1650.
  4. ↑ Sriram, Renuka; Kurhanewicz, John; Vigneron, Daniel B. (2014). "Hyperpolarized Carbon-13 MRI and MRS Studies". eMagRes. 3: 1–14. doi:10.1002/9780470034590.emrstm1253.
  5. ↑ Sarah J. Nelson; John Kurhanewicz; Daniel B. Vigneron; Peder E. Z. Larson; Andrea L. Harzstark; Marcus Ferrone; Mark van Criekinge; Jose W. Chang; Robert Bok; Ilwoo Park; Galen Reed; Lucas Carvajal; Eric J. Small; Pamela Munster; Vivian K. Weinberg; Jan Henrik Ardenkjaer-Larsen; Albert P. Chen; Ralph E. Hurd; Liv-Ingrid Odegardstuen; Fraser J. Robb; James Tropp; Jonathan A. Murray (2013). "Metabolic Imaging of Patients with Prostate Cancer Using Hyperpolarized [1-13C]Pyruvate". Science Translational Medicine. 5: 198ra108. doi:10.1126/scitranslmed.3006070.
  6. ↑ Jóhannesson, Haukur; Macholl, Sven; Ardenkjaer-Larsen, Jan (24 December 2008). "Dynamic Nuclear Polarization of [1- 13 C]pyruvic acid at 4.6 tesla". Journal of Magnetic Resonance (197): 167–175.
  7. ↑ Day, Sam; Kettunen, Mikko; Gallagher, Ferdia; Hu, De-En; Lerche, Mathilde; Wolber, Jan (28 October 2007). "Detecting tumor response to treatment using hyperpolarized 13C magnetic resonance imaging and spectroscopy". Nature Medicine (13): 1382–1387.
  8. ↑ Miloushev, VZ; Keshari, KR; Holodny, AI (2016). "Hyperpolarization MRI: Preclinical Models and Potential Applications in Neuroradiology". Topics in Magnetic Resonance Imaging. 25 (1): 31–37. doi:10.1097/RMR.0000000000000076.
  9. ↑ "Clinical Trials".
  10. ↑ Janine M. Lupo; Albert P. Chen; Matthew L. Zierhut; Robert A. Bok; Charles H. Cunningham; John Kurhanewicz; Daniel B. Vigneron; Sarah J. Nelson (2010). "Analysis of hyperpolarized dynamic 13C lactate imaging in a transgenic mouse model of prostate cancer". Magnetic Resonance Imaging. 28: 153–162. doi:10.1016/j.mri.2009.07.007.
  11. ↑ Charles H. Cunningham; Albert P. Chen; Michael Lustig; Brian A. Hargreaves; Janine Lupo; Duan Xu; John Kurhanewicz; Ralph E. Hurd; John M. Pauly; Sarah J. Nelson; Daniel B. Vigneron (2008). "Pulse sequence for dynamic volumetric imaging of hyperpolarized metabolic products". Journal of Magnetic Resonance. 193: 139–146. doi:10.1016/j.jmr.2008.03.012.
  12. ↑ Peder E.Z. Larson; Adam B. Kerr; Albert P. Chen; Michael S. Lustig; Matthew L. Zierhut; Simon Hu; Charles H. Cunningham; John M. Pauly; John Kurhanewicz; Daniel B. Vigneron (2008). "Multiband excitation pulses for hyperpolarized 13C dynamic chemical-shift imaging". Journal of Magnetic Resonance. 194: 121–127. doi:10.1016/j.jmr.2008.06.010.
  13. ↑ Yan Xing; Galen D. Reed; John M. Pauly; Adam B. Kerr; Peder E.Z. Larson (2013). "Optimal variable flip angle schemes for dynamic acquisition of exchanging hyperpolarized substrates". Journal of Magnetic Resonance. 234: 75–81. doi:10.1016/j.jmr.2013.06.003.
  14. ↑ Maidens, John; Gordon, Jeremy W.; Arcak, Murat; Larson, Peder E. Z. (2016). "Optimizing flip angles for metabolic rate estimation in hyperpolarized carbon-13 MRI". IEEE Transactions on Medical Imaging. doi:10.1109/TMI.2016.2574240.
  15. ↑ Chattergoon, N.; Martínez-Santiesteban, F.; Handler, W. B.; Ardenkjaer-Larsen, J. H.; Scholl, T. J. (January 2013). "Field dependence of T1 for hyperpolarized [1-13C] pyruvate". Contrast Media & Molecular Imaging. 8 (1): 57–62. doi:10.1002/cmmi.1494.
  16. 1 2 3 4 Yen, Yi-Fen; Le Roux, Patrick; Mayer, Dirk; King, Randy; Spielman, Daniel; Tropp, James; Butts Pauly, Kim; Pfefferbaum, Adolf; Vasanawala, Shreyas (2010-05-01). "T2 relaxation times of 13C metabolites in a rat hepatocellular carcinoma model measured in vivo using 13C-MRS of hyperpolarized [1-13C]pyruvate". NMR in Biomedicine. 23 (4): 414–423. doi:10.1002/nbm.1481. ISSN 1099-1492. PMC 2891253Freely accessible. PMID 20175135.
  17. ↑ Søgaard, Lise Vejby; Schilling, Franz; Janich, Martin A.; Menzel, Marion I.; Ardenkjær-Larsen, Jan Henrik (2014). "In vivo measurement of apparent diffusion coefficients of hyperpolarized 13C-labeled metabolites". NMR in Biomedicine. 27: 561–569. doi:10.1002/nbm.3093.
  18. ↑ Naeim Bahrami; Christine Leon Swisher; Cornelius Von Morze; Daniel B. Vigneron; Peder E. Z. Larson (2014). "Kinetic and perfusion modeling of hyperpolarized 13C pyruvate and urea in cancer with arbitrary RF flip angles". Quantitative Imaging in Medicine and Surgery. 4: 24–32. doi:10.3978/j.issn.2223-4292.2014.02.02.
  19. ↑ Deborah K. Hill; Matthew R. Orton; Erika Mariotti; Jessica K. R. Boult; Rafal Panek; Maysam Jafar; Harold G. Parkes; Yann Jamin; Maria Falck Miniotis; Nada M. S. Al-Saffar; Mounia Beloueche-Babari; Simon P. Robinson; Martin O. Leach; Yuen-Li Chung; Thomas R. Eykyn (2014). "Model Free Approach to Kinetic Analysis of Real-Time Hyperpolarized 13C Magnetic Resonance Spectroscopy Data". PLOS One. 8: e71996. doi:10.1371/journal.pone.0071996.
This article is issued from Wikipedia - version of the 8/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.