G&SWR 23 Class

G&SWR 23 Class
Type and origin
Power type Steam
Designer Patrick Stirling
Builder Sharp, Stewart and Company
Build date 1860-2
Total produced 20
Specifications
Configuration 0-4-2
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver dia. 5 ft 0 in (1.52 m)
Trailing dia. 3 ft 6 in (1.07 m)
Wheelbase 7 ft 2 in (2.18 m) + 8 ft 10 in (2.69 m)
Loco weight 27 long tons (27.43 t)
Fuel type Coal
Boiler pressure 120 psi (0.83 MPa)
Cylinders two
Cylinder size 16 in × 22 in (410 mm × 560 mm)
Career
Withdrawn 1882-1904
Disposition All scrapped

The Glasgow and South Western Railway (GSWR) 23 class is a class of twenty 0-4-2 steam locomotives designed in 1860. They were by Patrick Stirling’s fourth 0-4-2 design for the railway.

Development

The twenty examples of this class were designed by Patrick Stirling for the GSWR and were built by Sharp Stewart and Company (Works Nos. 1196-1205, 1264–73 and 1359–60) between July 1860 and October 1862. They were numbered 23, 35, 37, 116-122, 22, 24, and 123-30.[1] The members of the class were fitted with domeless boilers and safety valves over the firebox, these were later replaced by those of Ramsbottom design over the centre of the boiler following a boiler explosion at Springhill in 1876.[2] The original weather boards were also replaced by Stirling cabs.

Eight of the class were rebuilt as 0-4-2T locomotives between 1880-1886

Withdrawal

The unrebuilt locomotives were withdrawn by Hugh Smellie between 1882 and 1888. The rebuilt locomotives were withdrawn between 1890 and 1904.

References

  1. ↑ Baxter, Bertram (1984). British locomotive catalogue 1825-1923. 4. Buxton: Moorland Publishing. pp. 140–141.
  2. ↑ Bertram (1984), p.138-140.


This article is issued from Wikipedia - version of the 1/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.