Coordinated Incident Management System

The New Zealand Co-ordinated Incident Management System (CIMS)[1] is New Zealand's system for managing the response to an incident involving multiple responding agencies. Its developers based the system on California's Incident Command System (ICS) - developed in the 1970s - and on other countries' adaptations of ICS, such as Australia's Australasian Inter-Service Incident Management System (AIIMS).[2]

As a generic framework, CIMS can be adapted for each situation that arises. For example, while there are four management functions, the incident itself determines the size of the incident management team. In an isolated incident, a single officer may perform all of functions; in a very complex incident each function could be sub-divided. Instead, CIMS emphasises consistent terminology, a single multi-agency Incident Control Point for each site or, where possible, wider incident, and planning tools across all agencies. For example, the term "Assembly Area" means the same thing in every incident - although there may well be several Assembly Areas in more complex incidents. Likewise, all trained responders know the roles and responsibilities of the Logistics Manager.

CIMS was initially designed in the late 1990s to be applied to all levels of emergency response management, similar to the USA National Incident Management System (NIMS) and to the UK's Gold Silver Bronze command system, however the original CIMS manual clearly articulated only the incident/site level of response co-ordination.

CIMS was fully reviewed in 2014 subsequent to the 2010-2011 Canterbury earthquakes, the 2010 Pike River Mine disaster , and the 2011 MV Rena grounding. The revised 2014 manual incorporates higher levels of incident and emergency-response co-ordination, consistent with the arrangements and responsibilities outlined in the National Civil Defence Emergency Management Plan[3] (the National CDEM Plan). In some senses, the National CDEM Plan resembles the United States Department of Homeland Security's National Response Framework.

As of 2016 the revised approach to CIMS puts more emphasis on management and co-ordination processes, such as the internationally standard intelligence cycle and a more mature planning process, than it does on co-ordination structures, as such.

A distinguishing factor from other English-speaking systems is the use of the term control rather than command, as in the title "Incident Controller" for "Incident Commander". By implication, this was designed to emphasise that the incident management team is primarily a focused on co-ordinating the response by independent agencies, rather than ordering responders in a militaristic manner. This is complicated to a degree, as the person in charge of the operations function, usually an Operations Manager, does have the authority to command agencies to act.

Background concepts

CIMS is based around several background concepts that provide the basis for the operational elements.

Vision and mission

CIMS aims to deliver:

Vision: Safer communities through integrated emergency management.[2]
Mission: CIMS will create a legacy of safer communities through a proved, reliable, user-friendly, effective and efficient up-to-date [incident management] system. The system will be fully-integrated and flexible and have the confidence of the public.[2]

Principles of CIMS

Common Structures, Roles and Responsibilities

Common structures, roles, and responsibilities make it possible for agencies to work effectively alongside each other, and for personnel to interchange roles. They facilitate information flow and understanding by creating parallel structures and appointments.

Common Terminology

Common terminology is essential in incident management, especially for multi-agency responses. When agencies have slightly different meanings for terms, confusion and inefficiency can result. Common terminology for functions, processes, and facilities prevents this, improves communications between organisations, and allows faster and more effective responses.

Modular and Scalable

The modular and scalable CIMS structure is flexible and can be applied to all responses and to all levels within a response. Agencies may adapt their response structures prior to a response to suit their specific needs, and during a response to reflect changing circumstances. In the context of CIMS, modular organisation primarily means that the management structure can expand and contract depending on the nature of the incident or series of incidents that the agencies are responsible for. This means that at small, isolated incidents a single person may be in charge. At large, complex incidents, such as a major weather event, there will be multiple incident management teams co-ordinated by an overall emergency operations centre (EOC). Local or agency EOCs will be supported and co-ordinated by a regional-level emergency co-ordination centre (ECC) when the incident is of sufficient scale or complexity. This modular model primarily contrasts with developing pre-defined structures. The focus is on maintaining flexibility to each incident as it arises, rather than rote learning specific structures for every type of incident. Modular organisation also means that incident facilities can be established and removed as the incident develops.

Responsive to Community Needs

All responses aim to mitigate and manage the consequences for the affected community. This requires response personnel to effectively communicate with communities, understand their needs, and base their response and recovery actions on these needs. Communities will actively participate in a response rather than wait passively for assistance. Community response actions need to be co-ordinated with the official response.

Integrated Response Co-ordination

Integrated response co-ordination is the organisation of the responding agencies into a single, cohesive response. Consolidated action planning is a key component of integrated response co-ordination, as are resource co-ordination, and integrated information management and communications

Consolidated Incident Action Planning

Action Plans describe response objectives, agency and team tasks, and the measures needed to co-ordinate the response. They are proactive, seeking to pre-empt hazards where possible, and to resolve the situation as quickly as possible. A multi-agency Action Plan must have input from all support agencies to be effective.

Integrated Information Management and Communication

Integrated information management and communications enable effective information sharing, supporting more effective action planning and response co-ordination, as well as wider situational awareness. It aims to establish a common operating picture (an understanding of the situation based on the best available information, shared between all response agencies), and requires a common communications plan, standard procedures, clear text, common communication means, and common terminology.

Resource Co-ordination

Resource co-ordination organises resources across all response agencies. Agencies inform each other of their available capabilities and resources so that procurement and use of resources can be managed efficiently. Lead agencies monitor resource information, and may set priorities for allocating critical resources. This consolidates control of resources, maximises resource use, provides accountability, and improves situational awareness.

Designated Response Facilities

Designated response facilities with clearly defined functions assist in effective incident management.

Manageable Span of Control

Span of control is the number of direct reports any one person can effectively manage, 1:5 being best practice and 1:3 being the optimum for tactical command roles.

Supporting intentions

In addition to the principles there are three supporting intentions:

Common training standards and accreditation

Common training standards, supported by accreditation, help to ensure that personnel in key positions have the requisite skills and experience to perform their roles, and to provide equivalence between organisations. Common training enhances personal relationships between agency personnel and may provide economies of scale.

Regular review

Regular review of CIMS ensures its effectiveness and relevance. Lessons are only learned when doctrine is amended and training is updated to reflect the new information.

International compatibility

Maintaining international compatibility ensures that New Zealand agencies and personnel are able to operate effectively with overseas organisations and personnel, and enables New Zealand response agencies to more easily analyse and incorporate lessons from overseas experience.

Command, control and co-ordination

The terms command, control and co-ordination play a big role within CIMS. These terms help define the roles and responsibilities between incident managers that may direct responders from multiple organisations and line managers who act within a single agency. Control operates horizontally between agencies, whereas Command operates vertically within an agency. Co-ordination describes the overall cohesion of agencies working together with defined responsibilities.

Lead agencies, support agencies and unified control

Lead agency

A lead agency is the agency with a mandate to manage the response to an incident through legislation, under protocols, by agreement, or because it has the expertise and experience. The lead agency establishes control to co-ordinate the response of all agencies involved. The lead agency may change between risk reduction, readiness, response, and recovery. It may also change as the incident progresses, if the required authority or expertise changes. When the lead agency cannot be readily identified, response agencies may adopt a joint ‘Unified Control’ structure (see below).

Some general examples of lead agencies:

General Examples of Lead Agencies at Incidents
Incident Type Lead Agency Basis
House Fire New Zealand Fire Service Fire Service Act 1975
Crime Involving Injury New Zealand Police Common law, Policing Act 2008
Outbreak of biological organism Ministry for Primary Industries (Previously called Biosecurity New Zealand) Biosecurity Act 1993
Structural Collapse New Zealand Fire Service National Civil Defence Emergency Management Plan Order 2005

Support agencies

A support agency is an agency that provides support to the lead agency in a response. The lead agency tasks and co-ordinates support agencies’ resources and actions. The type of incident determines which support agencies are involved, and these agencies may change as the response progresses. While an agency may have the lead for a particular response, support agencies often have statutory responsibilities and specific objectives of their own, which the lead agency needs to accommodate. The lead agency is responsible for ensuring arrangements and plans are in place prior to incidents where they will have the lead. Support agencies are responsible for assisting in the development of these. Integration of support agencies into the response is a fundamental responsibility of lead agencies.

General Examples of Support Agencies at Incidents
Incident Type Lead Agency Support Agencies
Whale Stranding Department of Conservation Community organisations, iwi, hapū and whānau, Local Government
Overturned bus New Zealand Police or New Zealand Fire Service depending on the situation Local ambulance service, local District health board, Victim Support, on-scene first aiders,

Unified control

Unified Control is when the control of an incident is shared between two or more agencies by agreement through a combined decision-making body. The command appointments for each agency establish an agreed concept of operations and a single Action Plan. Unified Control is usually applied when:

Agencies applying Unified Control establish a joint co-ordination centre (CC), with key appointments filled by the most appropriate personnel from any agency. Agency command appointments do not have to be present at all times, but need to come together to agree on key decisions.

Other than a combined Control function, the joint CC follows usual CIMS practices.

Response co-ordination functions

Control

Control is responsible for the overall incident progression, and is performed by the lead agency. The Incident Controller (IC) has overall accountability for the incident. The IC has three main responsibilities:

Operations

The Operations function oversees delivery of the Action Plan, which means making sure that responders are being as productive as possible. Operations is generally responsible for operational command of resources, in order to fulfil the objectives set by the IC. This means allocating agencies specific functions in their areas of expertise, monitoring their performance, and providing a communication link between the responders and the other elements of the IMT, especially Logistics.

Planning and intelligence

The Planning and Intelligence functions are responsible for forecasting the incident development, anticipating likely needs and drafting the Action Plan. This role is strategic in scope. "This incident will go on for another 12 hours, we will need lighting, food and shelter for the expected rain".

Logistics

The Logistics function ensures that the operation can continue by ensuring that there are sufficient resources on-site and related functions.

Response co-ordination tools

Intelligence Cycle
Planning Process
SitRep (Situation Report)

The SitRep is a report from responders as to what is happening now. This information is gathered by the Incident Management Team (IMT) to develop the Action Plan (AP).

Action Plan

The Action Plan (AP) is a template for ensuring that the IMT and all agencies involved in the response have a consistent approach to the incident. It is the single plan that all agencies and responders work to.

Resource Request
Task Plan
Incident Report

History

Pre-1990s

Despite having had a national fire service since 1976, and a national police force since the late 19th Century, there was no consistency in the management of the response to emergencies. Each agency had its own communication system, jargon, hierarchy and attitude towards a particular type of emergency.

Development of CIMS was also indirectly influenced by a major review of New Zealand's emergency services, which took place in the mid-1990s.[4] This review recommended that agencies should look at working closer together, in order to provide a more integrated service to New Zealand communities.

Example of issue

Road-vehicle crashes that do not involve fire show how confusion could arise. The Fire Service Act 1975 grants authority to the New Zealand Fire Service for fires, as well as all other emergencies where it feels it can render assistance.[5] The Police, however, have a common-law duty to protect life and property, as well as statutory enforcement authority of transport legislation. Likewise, the local ambulance service may feel it has primary responsibility, because it is responsible for the well-being of anyone injured by the incident. With each agency thinking that it is in charge, effective co-ordination may become difficult.

1996: CIMS conceived

In 1996, the New Zealand Fire Service began to promote the idea of implementing an incident management system that was common across all emergency response and management agencies. In March 1997, a workshop of 25 representatives from the New Zealand Police, New Zealand Fire Service, the National Rural Fire Authority, New Zealand Ambulance Board, Civil Defence, local government, New Zealand Defence Force, New Zealand Forest Owners Association and the Department of Conservation was held.[2]

This initial workshop developed the vision, mission and project scope.[2] Since then, the system, nationwide training using consistent training materials and the system's implementation have been carried out.

1998: System developed

Nationally consistent training

By 1998, much of the system was developed. Two levels of training were decided upon, at awareness and practitioner levels. Training was develivered through the NZQA's National Qualifications Framework, with the Fire & Rescue Services Industry Training Organisation (FRISTO) nominated as the Standards Setting Body and holding authority for national moderation.

One unique element of CIMS, is that the practitioner level programmes must be delivered in a multi-agency environment.[6]

Co-ordination between the emergency services

As well as training individual responders, a wider level of co-ordination between the emergency services was required in order for New Zealand's emergency services to develop towards the model of comprehensive emergency management, as envisaged by the 1995 civil defence emergency management review.[7] During the late 1990s, territorial authorities aligned to form Emergency Management Groups (now known as Civil Defence Emergency Management Groups), in anticipation of legislative change promoting a move away from purely response-focused planning.[8]

In addition to efforts by local government, Emergency Services Coordination Committees were established to enhance operational effectiveness, clarify local capabilities and establish lead agencies for circumstances where statutory authority was unclear, as in the example above. Two examples of committees that remain in existence include those in the Counties-Manukau[9] and Central Hawkes Bay[10] areas.

CIMS reviewed 2014

The second edition of CIMS builds on the first by incorporating experience gained since 1998. In particular, it reflects the lessons identified from the responses to a number of large-scale and complex emergencies that occurred in New Zealand from 2010 to 2012. These emergencies emphasised the importance of CIMS, but also subjected the system to new levels of examination, and identified areas where it needs strengthening. Accordingly, this edition of CIMS also gives effect to recommendations from formal reviews and inquiries into those emergency responses, including:

This revised CIMS establishes a modular and scalable framework for consistent response at any level – from a small, single agency response to a larger, multi-agency response that may require co-ordination at the community or incident level or higher. CIMS enables agencies to plan for, train and conduct responses in a consistent manner, without being prescriptive. With this approach CIMS is an essential tool in New Zealand’s preparedness to effectively respond to emergencies.

Current use

CIMS using organisations

CIMS is to be used by all emergency services, government agencies and management agencies, including those agencies involved in the 2012-2014 review:

Wider adoption

Business continuity/crisis management

In recent years, CIMS has also been recognised as best practice for implementing management structures for response and recovery. Many organisations outside those identified above are now adopting CIMS - including lifeline utilities, universities,[11] and businesses.[6] The key benefits are adopting a recognised standard, and being able to interoperate with other agencies during response to complex events that involve more than one agency.

Land search and rescue

New Zealand Land Search and Rescue Inc (LandSAR) has widely adopted the use of CIMS.[12]

Access to CIMS training and education

Training is provided by a number of public sector, commercial organisations and NZQA private training establishments. CIMS 2 is widely available from a number of vendors. CIMS 4 can only be delivered as a multi-agency course - usually led in rotation by Police, Fire, Ambulance or the local Civil Defence Emergency Management (CDEM) authority. For more information, contact your local Civil Defence Emergency Management authority for more information.

CIMS training is registered on the National Qualifications Framework, run by the New Zealand Qualifications Authority.

More in-depth study into concepts of Incident Management is available from Massey University in a third-year paper on Incident Command Systems 130301.[15]

References

Notes

  1. "The New Zealand Coordinated Incident Management System (CIMS)" (PDF). Officials’ Committee for Domestic and External Security Coordination: Department of the Prime Minister and Cabinet. New Zealand Government. April 2014. p. 1-1. ISBN 978-0-478-43500-9. Archived from the original (PDF) on 2014-05-28. Retrieved 2016-08-28. THE NEW ZEALAND COORDINATED INCIDENT MANAGEMENT SYSTEM (CIMS) 2nd edition [...] This edition replaces the first edition published in 1998 by the New Zealand Fire Service Commission
  2. 1 2 3 4 5 New Zealand Fire Service Commission, p.8, 1998.
  3. Archived June 15, 2008, at the Wayback Machine.
  4. Archived October 22, 2008, at the Wayback Machine.
  5. "Fire Service Act 1975 No 42 (as at 05 August 2013), Public Act 28 Functions, duties, and powers of Chief Fire Officer – New Zealand Legislation". Legislation.govt.nz. 2013-08-05. Retrieved 2015-03-07.
  6. 1 2 Archived March 17, 2006, at the Wayback Machine.
  7. Archived October 18, 2008, at the Wayback Machine.
  8. "Quick Facts - Government Services : Emergency Management and Fire Safety". .stats.govt.nz. Retrieved 2015-03-07.
  9. Archived October 15, 2008, at the Wayback Machine.
  10. Archived April 1, 2008, at the Wayback Machine.
  11. Archived July 24, 2011, at the Wayback Machine.
  12. "Demonstrate knowledge of the coordinated incident management system (CIMS)" (PDF). Nzqa.govt.nz. Retrieved 2015-03-07.
  13. "Describe the roles and functions of a CIMS Incident Management Team (IMT) at an incident" (PDF). Nzqa.govt.nz. Retrieved 2015-03-07.
  14. "130.301 Incident Command Systems - 2015 - Massey University". Massey.ac.nz. 2012-12-10. Retrieved 2015-03-07.
  15. Archived October 14, 2008, at the Wayback Machine.
This article is issued from Wikipedia - version of the 11/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.