Xilinx

Xilinx, Inc.
Public
Traded as NASDAQ: XLNX
NASDAQ-100 Component
S&P 500 Component
Industry Integrated Circuits
Founded 1984 (1984)
Founder Jim Barnett
Ross Freeman
Bernie Vonderschmitt
Headquarters San Jose, California, U.S.
Area served
Worldwide
Key people
Dennis Segers
Chairman of the Board
Moshe N. Gavrielov
President CEO Director
Products FPGAs, CPLDs
Revenue
  • Increase US$ 2.382 billion (2014) [1]
  • Decrease US$ 2.168 billion (2013)[1]
  • Increase US$ 748.927 million (2014) [1]
  • Decrease US$ 580.732 million (2013)[1]
  • Increase US$ 630.388 million (2014) [1]
  • Decrease US$ 487.536 million (2013)[1]
Total assets
  • Increase US$ 5.037 billion (2014) [1]
  • Increase US$ 4.729 billion (2013)[1]
Total equity
  • Decrease US$ 2.752 billion (2014) [1]
  • Increase US$ 2.963 billion (2013)[1]
Number of employees
3,500 - 2016[2]
Website xilinx.com

Xilinx, Inc. (/ˈzlɪŋks/ ZY-lingks) is an American technology company, primarily a supplier of programmable logic devices. It is known for inventing the field-programmable gate array (FPGA) and as the first semiconductor company with a fabless manufacturing model.[3][4][5]

Founded in Silicon Valley in 1984, the company is headquartered in San Jose, USA, with additional offices in Longmont, USA; Dublin, Ireland; Singapore; Hyderabad, India; Beijing, China; Shanghai, China; Brisbane, Australia and Tokyo, Japan.[6][7]

Major FPGA product families include Virtex (high-performance), Kintex (mid-range) and Artix (low-cost), and the retired Spartan (low-cost) series. Major computer software includes Xilinx ISE and Vivado Design Suite.[8]

History

Early days

Ross Freeman, Bernard Vonderschmitt, and James V Barnett II, who all had worked for integrated circuit and solid-state device manufacturer Zilog Corp, founded Xilinx in 1984.[6][9]

While working for Zilog, Freeman wanted to create chips that acted like a blank tape, allowing users to program the technology themselves. At the time, the concept was paradigm changing.[9] "The concept required lots of transistors and, at that time, transistors were considered extremely precious—people thought that Ross's idea was pretty far out", said Xilinx Fellow Bill Carter, who when hired in 1984, as the first IC designer, was Xilinx's eighth employee.[9]

Big semiconductor manufacturers were enjoying strong profits by producing massive volumes of generic circuits.[6] Designing and manufacturing dozens of different circuits for specific markets offered lower profit margins and required greater manufacturing complexity.[6] What became known as the FPGA would allow circuits produced in quantity to be tailored by individual market segments.

Freeman failed to convince Zilog to invest in creating the FPGA to chase what was only a $100 million market at the time.[6] Freeman and Barnett left Zilog and teamed up with their 60-year-old ex-colleague Bernard Vonderschmitt to raise $4.5 million in venture funding to design the first commercially viable FPGA.[6] They incorporated the company in 1984 and began selling its first product by 1985.[6]

By late 1987 the company had raised more than $18 million in venture capital (equivalent to $37.56 million in 2015) and generated revenues at an annualized rate of nearly $14 million.[6][10]

Growth

As demand for programmable logic continued to grow, so did Xilinx's revenues and profits.[6]

From 1988 to 1990, the company's revenue grew each year from $30 million to $50 million to $100 million.[6] During this time period, the company which had been providing funding to Xilinx, Monolithic Memories Inc. (MMI), was purchased by Xilinx competitor AMD.[6] As a result, Xilinx dissolved the deal with MMI and went public on the NASDAQ in 1989.[6] The company also moved to a 144,000-square-foot (13,400 m2) plant in San Jose, California in order to keep pace with demand from companies like HP, Apple Inc., IBM and Sun Microsystems who were buying large quantities from Xilinx.[6]

Xilinx competitors emerged in the FPGA market in the mid-1990s.[6] Despite the competition, Xilinx's sales grew to $135 million in 1991, $178 million in 1992 and $250 million in 1993.[6]

The company reached $550 million in revenue in 1995, one decade after having sold its first product.[6]

According to market research firm iSuppli, Xilinx has held the lead in programmable logic device market share since the late 1990s. Over the years, Xilinx expanded operations to India, Asia and Europe.[11][12][13][14]

Xilinx's sales rose from $560 million in 1996 to $2.2 billion by the end of its fiscal year 2013.[15][16] Moshe Gavrielov – an EDA and ASIC industry veteran who was appointed as president and CEO in early 2008 – introduced targeted design platforms to provide solutions that combine FPGAs with software, IP cores, boards and kits to address focused target applications.[17] These targeted design platforms are an alternative to costly application-specific integrated circuits (ASICs) and application-specific standard products (ASSPs).[18][19][20]

Today

The company has expanded its product portfolio since its founding. Xilinx sells a broad range of FPGAs, complex programmable logic devices (CPLDs), design tools, intellectual property and reference designs.[3] Xilinx also has a global services and training program.[3]

After using the introduction of 3D chips to deliver more powerful FPGAs, Xilinx then adapted the technology to combine formerly separate components in a single chip, first combining an FPGA with transceivers to boost bandwidth capacity while using less power.[21] According to Xilinx CEO Moshe Gavrielov, the addition of a heterogeneous communications device, combined with the introduction of new software tools and the Zynq-7000 line of 28 nm SoC devices that combine an ARM core with an FPGA, are part of shifting its position from a programmable logic device supplier to one delivering “all things programmable”.[22]

The company's products have been recognized by EE Times, EDN and others for innovation and market impact.[23][24][25]

In addition to Zynq-7000, Xilinx product lines (see Current Family Lines) include the Virtex, Kintex and Artix series, each including configurations and models optimized for different applications.[26] With the introduction of the Xilinx 7 series in June, 2010, the company has moved to three major FPGA product families, the high-end Virtex, the mid-range Kintex family and the low-cost Artix family, retiring the Spartan brand, which ends with the Xilinx Series 6 FPGAs.[27][28] In April 2012, the company introduced the Vivado Design Suite - a next-generation SoC-strength design environment for advanced electronic system designs.[8] In May, 2014, the company shipped the first of the next generation FPGAs: the 20 nm UltraScale.[29]

Technology

The Spartan-3 platform was the industry’s first 90nm FPGA, delivering more functionality and bandwidth per dollar than was previously possible, setting new standards in the programmable logic industry.

Xilinx designs, develops and markets programmable logic products, including integrated circuits (ICs), software design tools, predefined system functions delivered as intellectual property (IP) cores, design services, customer training, field engineering and technical support.[3] Xilinx sells both FPGAs and CPLDs for electronic equipment manufacturers in end markets such as communications, industrial, consumer, automotive and data processing.[30][31][32][33][34][35][36]

Xilinx's FPGAs have been used for the ALICE (A Large Ion Collider Experiment) at the CERN European laboratory on the French-Swiss border to map and disentangle the trajectories of thousands of subatomic particles.[37] Xilinx has also engaged in a partnership with the United States Air Force Research Laboratory’s Space Vehicles Directorate to develop FPGAs to withstand the damaging effects of radiation in space, which are 1,000 times less sensitive to space radiation than the commercial equivalent, for deployment in new satellites.[38]

The Virtex-II Pro, Virtex-4, Virtex-5, and Virtex-6 FPGA families, which include up to two embedded IBM PowerPC cores, are targeted to the needs of system-on-chip (SoC) designers.[39][40][41]

Xilinx FPGAs can run a regular embedded OS (such as Linux or vxWorks) and can implement processor peripherals in programmable logic.[3]

Xilinx's IP cores include IP for simple functions (BCD encoders, counters, etc.), for domain specific cores (digital signal processing, FFT and FIR cores) to complex systems (multi-gigabit networking cores, the MicroBlaze soft microprocessor and the compact Picoblaze microcontroller).[3] Xilinx also creates custom cores for a fee.

The main design toolkit Xilinx provides engineers is the Vivado Design Suite, an integrated design environment (IDE) with a system-to-IC level tools built on a shared scalable data model and a common debug environment. Vivado includes electronic system level (ESL) design tools for synthesizing and verifying C-based algorithmic IP; standards based packaging of both algorithmic and RTL IP for reuse; standards based IP stitching and systems integration of all types of system building blocks; and the verification of blocks and systems.[42] A free version WebPACK Edition of Vivado provides designers with a limited version of the design environment.[43]

Xilinx's Embedded Developer's Kit (EDK) supports the embedded PowerPC 405 and 440 cores (in Virtex-II Pro and some Virtex-4 and -5 chips) and the Microblaze core. Xilinx's System Generator for DSP implements DSP designs on Xilinx FPGAs. A freeware version of its EDA software called ISE WebPACK is used with some of its non-high-performance chips. Xilinx is the only (as of 2007) FPGA vendor to distribute a native Linux freeware synthesis toolchain.[44]

Xilinx announced the architecture for a new ARM Cortex A9-based platform for embedded systems designers, that combines the software programmability of an embedded processor with the hardware flexibility of an FPGA.[45][46][47][48] The new architecture abstracts much of the hardware burden away from the embedded software developers' point of view, giving them an unprecedented level of control in the development process.[45][46][47][48] With this platform, software developers can leverage their existing system code based on ARM technology and utilize vast off-the-shelf open-source and commercially available software component libraries.[45][46][47][48] Because the system boots an OS at reset, software development can get under way quickly within familiar development and debug environments using tools such as ARM's RealView development suite and related third-party tools, Eclipse-based IDEs, GNU, the Xilinx Software Development Kit and others.[45][46][47][48] In early 2011, Xilinx began shipping a new device family based on this architecture. The Zynq-7000 SoC platform immerses ARM multi-cores, programmable logic fabric, DSP data paths, memories and I/O functions in a dense and configurable mesh of interconnect.[49][50] The platform targets embedded designers working on market applications that require multi-functionality and real-time responsiveness, such as automotive driver assistance, intelligent video surveillance, industrial automation, aerospace and defense, and next-generation wireless.[45][46][47][48]

Following the introduction of its 28 nm 7-series FPGAs, Xilinx revealed that several of the highest-density parts in those FPGA product lines will be constructed using multiple dies in one package, employing technology developed for 3D construction and stacked-die assemblies.[51][52] The company’s stacked silicon interconnect (SSI) technology stacks several (three or four) active FPGA dies side-by-side on a silicon interposer – a single piece of silicon that carries passive interconnect. The individual FPGA dies are conventional, and are flip-chip mounted by microbumps on to the interposer. The interposer provides direct interconnect between the FPGA dies, with no need for transceiver technologies such as high-speed SERDES.[51][52][53] In October 2011, Xilinx shipped the first FPGA to use the new technology, the Virtex-7 2000T FPGA, which includes 6.8 billion transistors and 20 million ASIC gates.[54][55][56][57] The following spring, Xilinx used the 3D technology to ship the Virtex-7 HT, the industry’s first heterogeneous FPGAs, which combine high bandwidth FPGAs with up to sixteen 28 Gbit/s and seventy-two 13.1 Gbit/s transceivers to reduce power and size requirements for key Nx100G and 400G line card applications and functions.[58][59]

In January 2011, Xilinx acquired design tool firm AutoESL Design Technologies and added System C high-level design for its 6- and 7-series FPGA families.[60] The addition of AutoESL tools extends the design community for FPGAs to designers more accustomed to designing at a higher level of abstraction using C, C++ and System C.[61]

In April 2012, Xilinx introduced a redesign of its toolset for programmable systems, called Vivado Design Suite. This IP and system-centric design software supports newer high capacity devices, and speeds the design of programmable logic and I/O.[62] Vivado provides faster integration and implementation for programmable systems into devices with 3D stacked silicon interconnect technology, ARM processing systems, analog mixed signal (AMS), and many semiconductor intellectual property (IP) cores.[63]

Current family lines

Prior to 2010, Xilinx offered two main FPGA families: the high-performance Virtex series and the high-volume Spartan series, with a cheaper EasyPath option for ramping to volume production.[26] The company also provides two CPLD lines: the CoolRunner and the 9500 series. Each model series has been released in multiple generations since its launch.[64] With the introduction of its 28 nm FPGAs in June 2010, Xilinx replaced the high-volume Spartan family with the Kintex family and the low-cost Artix family.[27][28]

In newer FPGA products, Xilinx minimizes total power consumption by the adoption of a high-K metal gate (HKMG) process, which allows for low static power consumption. At the 28 nm node, static power is a significant portion of the total power dissipation of a device and in some cases is the dominant factor. Through the use of a HKMG process, Xilinx has reduced power use while increasing logic capacity.[65] Virtex-6 and Spartan-6 FPGA families are said to consume 50 percent less power, and have up to twice the logic capacity compared to the previous generation of Xilinx FPGAs.[40][66][67]

In June, 2010 Xilinx introduced the Xilinx 7 series: the Virtex-7, Kintex-7, and Artix-7 families, promising improvements in system power, performance, capacity, and price. These new FPGA families are manufactured using TSMC's 28 nm HKMG process.[68] The 28 nm series 7 devices feature a 50 percent power reduction compared to the company's 40 nm devices and offer capacity of up to 2 million logic cells.[27] Less than one year after announcing the 7 series 28 nm FPGAs, Xilinx shipped the world’s first 28 nm FPGA device, the Kintex-7, making this the programmable industry’s fastest product rollout.[69][70] In March 2011, Xilinx introduced the Zynq-7000 family, which integrates a complete ARM Cortex-A9 MPCore processor-based system on a 28 nm FPGA for system architects and embedded software developers.[49][50]

In Dec, 2013, Xilinx introduced the UltraScale series: Virtex UltraScale and Kintex UltraScale families. These new FPGA families are manufactured by TSMC in its 20 nm planar process.[71] At the same time it announced an UltraScale SoC architecture, called Zynq UltraScale+ MPSoC, in TSMC 16 nm FinFET process.[72]

Virtex family

Main article: Virtex (FPGA)

The Virtex series of FPGAs have integrated features that include FIFO and ECC logic, DSP blocks, PCI-Express controllers, Ethernet MAC blocks, and high-speed transceivers. In addition to FPGA logic, the Virtex series includes embedded fixed function hardware for commonly used functions such as multipliers, memories, serial transceivers and microprocessor cores.[73] These capabilities are used in applications such as wired and wireless infrastructure equipment, advanced medical equipment, test and measurement, and defense systems.[74]

Xilinx's most recently announced Virtex, the Virtex 7 family, is based on a 28 nm design and is reported to deliver a two-fold system performance improvement at 50 percent lower power compared to previous generation Virtex-6 devices. In addition, Virtex-7 doubles the memory bandwidth compared to previous generation Virtex FPGAs with 1866 Mbit/s memory interfacing performance and over two million logic cells.[27][28]

In 2011, Xilinx began shipping sample quantities of the Virtex-7 2000T "3D FPGA", which combines four smaller FPGAs into a single package by placing them on a special silicon interconnection pad (called an interposer) to deliver 6.8 billion transistors in a single large chip. The interposer provides 10,000 data pathways between the individual FPGAs – roughly 10 to 100 times more than would usually be available on a board – to create a single FPGA.[54][55][56] In 2012, using the same 3D technology, Xilinx introduced initial shipments of their Virtex-7 H580T FPGA, a heterogeneous device, so called because it comprises two FPGA dies and one 8-channel 28Gbit/s transceiver die in the same package.[22]

The Virtex-6 family is built on a 40 nm process for compute-intensive electronic systems, and the company claims it consumes 15 percent less power and has 15 percent improved performance over competing 40 nm FPGAs.[75]

The Virtex-5 LX and the LXT are intended for logic-intensive applications, and the Virtex-5 SXT is for DSP applications.[76] With the Virtex-5, Xilinx changed the logic fabric from four-input LUTs to six-input LUTs. With the increasing complexity of combinational logic functions required by SoC designs, the percentage of combinational paths requiring multiple four-input LUTs had become a performance and routing bottleneck. The new six-input LUT represented a tradeoff between better handling of increasingly complex combinational functions, at the expense of a reduction in the absolute number of LUTs per device. The Virtex-5 series is a 65 nm design fabricated in 1.0 V, triple-oxide process technology.[77]

Legacy Virtex devices (Virtex, Virtex-II, Virtex-II Pro, Virtex 4) are still available, but are not recommended for use in new designs.

Kintex

The Kintex-7 family is the first Xilinx mid-range FPGA family that the company claims delivers Virtex-6 family performance at less than half the price while consuming 50 percent less power. The Kintex family includes high-performance 12.5 Gbit/s or lower-cost optimized 6.5 Gbit/s serial connectivity, memory, and logic performance required for applications such as high volume 10G optical wired communication equipment, and provides a balance of signal processing performance, power consumption and cost to support the deployment of Long Term Evolution (LTE) wireless networks.[27][28]

Artix

The Artix-7 family delivers 50 percent lower power and 35 percent lower cost compared to the Spartan-6 family and is based on the unified Virtex-series architecture. Xilinx claims that Artix-7 FPGAs deliver the performance required to address cost-sensitive, high-volume markets previously served by ASSPs, ASICs, and low-cost FPGAs. The Artix family is designed to address the small form factor and low-power performance requirements of battery-powered portable ultrasound equipment, commercial digital camera lens control, and military avionics and communications equipment.[27][28]

Zynq

The Zynq-7000 family of SoCs addresses high-end embedded-system applications, such as video surveillance, automotive-driver assistance, next-generation wireless, and factory automation.[49][50][78] Zynq-7000 integrate a complete Cortex-A9-processor-based 28 nm system. The Zynq architecture differs from previous marriages of programmable logic and embedded processors by moving from an FPGA-centric platform to a processor-centric model.[49][50][78] For software developers, Zynq-7000 appear the same as a standard, fully featured ARM processor-based system-on-chip (SOC), booting immediately at power-up and capable of running a variety of operating systems independently of the programmable logic.[49][50][78] In 2013, Xilinx introduced the Zynq-7100, which integrates digital signal processing (DSP) to meet emerging programmable systems integration requirements of wireless, broadcast, medical and military applications.[79]

The new Zynq-7000 product family posed a key challenge for system designers, because Xilinx ISE design software had not been developed to handle the capacity and complexity of designing with an FPGA with an ARM core.[8][63] Xilinx's new Vivado Design Suite addressed this issue, because the software was developed for higher capacity FPGAs, and it included high level synthesis functionality that allows engineers to compile the co-processors from a C-based description.[8][63]

The AXIOM,[80] the world's first digital cinema camera that is open source hardware, contains a Zynq-7000.[81]

A Zynq 7010 or 7020 is included in the adapteva parallella board.

In October 2015, snickerdoodle combined Zynq with Wi-Fi and Bluetooth.[82]

Spartan family

The Spartan series targets applications with a low-power footprint, extreme cost sensitivity and high-volume; e.g. displays, set-top boxes, wireless routers and other applications.[83]

The Spartan-6 family is built on a 45-nanometer [nm], 9-metal layer, dual-oxide process technology.[66][84] The Spartan-6 was marketed in 2009 as a low-cost option for automotive, wireless communications, flat-panel display and video surveillance applications.[84]

EasyPath

Because EasyPath devices are identical to the FPGAs that customers are already using, the parts can be produced faster and more reliably from the time they are ordered compared to similar competing programs.[85]

A 12-week time is guaranteed from receiving the design to mass production, and no redesign or re-qualification are required by the customer. In addition, customers are free to switch production from the non-programmable EasyPath FPGA to the original programmable Virtex FPGA if the need for design changes arises.

BaySand provides similar service to Xilinx called MetalCopy. MetalCopy is based on BaySand's Metal Configurable Standard Cells (MCSC) and BaySand's ASIC design methodology flow. MetalCopy consists of taking the design from RTL to ASIC including Synthesis, Physical Layout, timing closure, test insertion, Build In Test, formal verification and static timing analysis. BaySand currently offers MetalCopy for all FPGA designs including 28nm and 14nm FPGA devices.

Corporate strategy and culture

Xilinx joined the Fortune ranks of the "100 Best Companies to Work For" in 2001 as No. 14, rose to No. 6 in 2002 and rose again to No. 4 in 2003.[86]

In December 2008, GSA named Xilinx the Most Respected Public Semiconductor Company with $500 million to $10 billion in annual sales. The award recognizes excellence through success, vision and strategy in the industry.[87]

Origin of the company name

Having tried to register a number of more conventional company-names and having them rejected as already taken, the founders decided to deliberately create an unusual name in order to ensure that the name was accepted. Several legends explain the origin of the name. Xilinx Fellow Bill Carter said that the name Xilinx was chosen because "The chemical symbol for silicon is Si. The 'X's at each end represent programmable logic blocks. The "linx" represents programmable links that connect the logic blocks together."[9] Another explanation has it that two of the founders, Ross Freeman and Jim Barnett both attended the University of Illinois at Urbana–Champaign, also called the Fighting Illini. The name allegedly originated because the company founders were two ex-Illini, hence Xilinx (two 'X' Illini).

Ross Freeman

Ross Freeman, credited with the invention of the FPGA, was inducted into the National Inventor's Hall of Fame in 2009, more than 20 years after the invention of the FPGA.[88] Starting in 1992, Xilinx has had an annual tradition of awarding a company employee with the Ross Freeman Award for Technical Innovation in Freeman's memory. Award honorees are based on nominations for innovations that resulted in significant tangible benefit to the company. Finalists are chosen by a committee and winners are selected based on a vote.[88]

Competition

Today, Xilinx customers represent just over half of the entire programmable logic market, at 51%.[3][4][89] Altera is Xilinx's strongest competitor with 34% of the market. Other key players in this market are BaySand, Actel (now Microsemi), and Lattice Semiconductor.[5]

References

  1. 1 2 3 4 5 6 7 8 9 10 "XILINX INC 2014 Annual Report Form (10-K)" (XBRL). United States Securities and Exchange Commission. May 16, 2014.
  2. http://www.xilinx.com/
  3. 1 2 3 4 5 6 7 "Xilinx". Retrieved August 16, 2015.
  4. 1 2 Jonathan Cassell, iSuppli. "A Forgettable Year for Memory Chip Makers: iSuppli releases preliminary 2008 semiconductor rankings." December 1, 2008. Retrieved January 15, 2009.
  5. 1 2 John Edwards, EDN. "No room for Second Place." June 1, 2006. Retrieved January 15, 2009.
  6. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Funding Universe. "Xilinx, Inc." Retrieved January 15, 2009.
  7. Cai Yan, EE Times. "Xilinx testing out China training program." Mar 27, 2007. Retrieved Dec 19, 2012.
  8. 1 2 3 4 Brian Bailey, EE Times. "Second generation for FPGA software." Apr 25, 2012. Retrieved Dec 21, 2012.
  9. 1 2 3 4 Xilinx MediaRoom - Press Releases. Press.xilinx.com. Retrieved on 2013-11-20.
  10. The Inflation Calculator. Retrieved January 15, 2009.
  11. Company Release. "Xilinx Underscores Commitment to China." November 1, 2006. Retrieved January 15, 2009.
  12. EE Times Asia. "Xilinx investing $40 million in Singapore operations." November 16, 2005. Retrieved January 15, 2009.
  13. Pradeep Chakraborty. "India a high growth area for Xilinx." August 8, 2008. Retrieved January 15, 2009.
  14. EDB Singapore. "Xilinx, Inc. strengthens presence in Singapore to stay ahead of competition." December 1, 2007. Retrieved January 15, 2009.
  15. Bloomberg Businessweek. "Earnings & Estimates Summary - XILINX INC (XLNX)." Apr 24, 2013. Retrieved Jun 3, 2013.
  16. Yahoo! Finance, “Key Statistics According to Capital IQ.” Retrieved June 10, 2010.
  17. Embedded Technology Journal, “Introducing the Xilinx Targeted Design Platform: Fulfilling the Programmable Imperative.” Retrieved June 10, 2010.
  18. Lou Sosa, Electronic Design. "PLDs Present The Key To Xilinx's Success." June 12, 2008. Retrieved January 20, 2008.
  19. Mike Santarini, EDN. "Congratulations on the Xilinx CEO gig, Moshe!." January 8, 2008. Retrieved January 20, 2008.
  20. Ron Wilson, EDN. "Moshe Gavrielov Looks into the Future of Xilinx and the FPGA Industry." January 7, 2008. Retrieved January 20, 2008.
  21. Clive Maxfield, EETimes. "Xilinx ships the world’s first heterogeneous 3D FPGA." May 30, 2012. Retrieved June 12, 2012.
  22. 1 2 Electronic Product News. "Interview with Moshe Gavrielov, president, CEO, Xilinx." May 15, 2012. Retrieved June 12, 2012.
  23. EE Times, “EE Times 2010 ACE Award for Design Innovation.” April 27, 2010. Retrieved June 17, 2010.
  24. EDN, “EDN Hot 100 Products of 2007: Digital, Memory and Programmable ICs Archived April 3, 2012, at the Wayback Machine..” December 14, 2007. Retrieved June 17, 2010.
  25. EDN, “The Hot 100 Electronic Products of 2009 Archived April 3, 2012, at the Wayback Machine..” December 15, 2009. Retrieved June 15, 2010.
  26. 1 2 DSP-FPGA.com. Xilinx FPGA Products.” April 2010. Retrieved June 10, 2010.
  27. 1 2 3 4 5 6 EE Times. “Xilinx to offer three classes of FPGAs at 28-nm.” June 21, 2010. Retrieved September 23, 2010.
  28. 1 2 3 4 5 Kevin Morris, FPGA Journal. “Veni! Vidi! Virtex! (and Kintex and Artix Too) Archived November 23, 2010, at the Wayback Machine..” June 21, 2010. Retrieved September 23, 2010.
  29. "Xilinx ships first 20nm Virtex UltraScale FPGA – W... - Xilinx User Community Forums". Retrieved August 16, 2015.
  30. Xcell Journal, "Building Automotive Driver Assistance System Algorithms with Xilinx FPGA platforms." October, 2008. Retrieved January 28, 2009.
  31. Xcell Journal, "Taking Designs to New Heights with Space-Grade Virtex-4QV FPGAs." July, 2008. Retrieved January 28, 2009.
  32. Xcell Journal, "A Flexible Platform for Satellite-Based High-Performance Computing". January 2009 p 22. Retrieved January 28, 2009.
  33. Xcell Journal, "Virtex-5 Powers Reconfigurable Rugged PC." January 2009 p28. Retrieved January 28, 2009.
  34. Xcell Journal, "Exploring and Prototyping Designs for Biomedical Applications." July 2008. Retrieved January 28, 2009.
  35. Xcell Journal, "Security Video Analytics on Xilinx Spartan-3A DSP." October 2008. Retrieved January 28, 2009.
  36. Xcell Journal, "A/V Monitoring System Rides Virtex-5." October 2008. Retrieved January 28, 2009.
  37. Xcell Journal, "CERN Scientists Use Virtex-4 FPGAs for Big Bang Research Archived March 27, 2009, at the Wayback Machine.." July 2008. Retrieved January 28, 2009.
  38. By Michael Kleinman, US Airforce News. “New computer chip cuts costs, adds efficiency to space systems.” September 21, 2010. Retrieved September 23, 2010.
  39. Virtex-II Pro Datasheet
  40. 1 2 Virtex-4 Family Overview
  41. Richard Wilson, ElectronicsWeekly.com, "Xilinx repositions FPGAs with SoC move." February 2, 2009. Retrieved on February 2, 2009.
  42. EDN. "The Vivado Design Suite accelerates programmable systems integration and implementation by up to 4X." Jun 15, 2012. Retrieved Jun 25, 2013.
  43. Clive Maxfield, EE Times. "WebPACK edition of Xilinx Vivado Design Suite now available." Dec 20, 2012. Retrieved Jun 25, 2013.
  44. Ken Cheung, EDA Geek. “Xilinx Rolls Out Embedded Development Kit 9.li.” March 26, 2007. Retrieved June 10, 2010.
  45. 1 2 3 4 5 Toni McConnel, EE Times. "Xilinx Extensible Processing Platform combines best of serial and parallel processing." April 28, 2010. Retrieved February 14, 2011.
  46. 1 2 3 4 5 Ken Cheung, FPGA Blog. "Xilinx Extensible Processing Platform for Embedded Systems." April 27, 2010. Retrieved February 14, 2011.
  47. 1 2 3 4 5 Rich Nass, EE Times. "Xilinx puts ARM core into its FPGAs." April 27, 2010. Retrieved February 14, 2011.
  48. 1 2 3 4 5 Steve Leibson, Design-Reuse. "Xilinx redefines the high-end microcontroller with its ARM-based Extensible Processing Platform - Part 1." May 3, 2010. Retrieved February 15, 2011.
  49. 1 2 3 4 5 Colin Holland, EE Times. "Xilinx provides details on ARM-based devices." March 1, 2011. Retrieved March 1, 2011.
  50. 1 2 3 4 5 Laura Hopperton, Newelectronics. "Embedded world: Xilinx introduces 'industry's first' extensible processing platform." March 1, 2011. Retrieved March 1, 2011.
  51. 1 2 EDN Europe. "Xilinx adopts stacked-die 3D packaging Archived February 19, 2011, at the Wayback Machine.." November 1, 2010. Retrieved May 12, 2011.
  52. 1 2 Lawrence Latif, The Inquirer. "FPGA manufacturer claims to beat Moore's Law." October 27, 2010. Retrieved May 12, 2011.
  53. Clive Maxfield, EETimes. "Xilinx multi-FPGA provides mega-boost re capacity, performance, and power efficiency!." October 27, 2010. Retrieved May 12, 2011.
  54. 1 2 Don Clark, The Wall Street Journal. "Xilinx Says Four Chips Act Like One Giant." October 25, 2011. Retrieved November 18, 2011.
  55. 1 2 Clive Maxfield, EETimes. "Xilinx tips world’s highest capacity FPGA." October 25, 2011. Retrieved November 18, 2011.
  56. 1 2 David Manners, Electronics Weekly. "Xilinx launches 20m ASIC gate stacked silicon FPGA." October 25, 2011. Retrieved November 18, 2011.
  57. Tim Pietruck, SciEngines GmbH. "." December 21, 2011 - RIVYERA-V7 2000T FPGA computer with the newest and largest Xilinx Virtex-7
  58. Tiernan Ray, Barrons. "Xilinx: 3-D Chip a Route to More Complex Semiconductors." May 30, 2012. Retrieved Jan 9, 2013.
  59. Loring Wirbel, EDN. "Xilinx Virtex-7 HT devices use 3D stacking for a high-end communication edge." May 30, 2012. Retrieved Jan 9, 2013.
  60. Dylan McGrath, EE Times. "Xilinx buys high-level synthesis EDA vendor." January 31, 2011. Retrieved February 15, 2011.
  61. Richard Wilson, ElectronicsWeekly.com. "Xilinx acquires ESL firm to make FPGAs easier to use." January 31, 2011. Retrieved February 15, 2011.
  62. Brian Bailey, EE Times. "Second generation for FPGA software." Apr 25, 2012. Retrieved Jan 3, 2013.
  63. 1 2 3 EDN. "The Vivado Design Suite accelerates programmable systems integration and implementation by up to 4X." Jun 15, 2012. Retrieved Jan 3, 2013.
  64. Stephen Brown and Johnathan Rose, University of Toronto. “Architecture of FPGAs and CPLDs: A Tutorial.” Retrieved June 10, 2010.
  65. Daniel Harris, Electronic Design. “If Only the Original Spartans Could Have Thrived On So Little Power.” February 27, 2008. Retrieved January 20, 2008.
  66. 1 2 Peter Clarke, EE Times, "Xilinx launches Spartan-6, Virtex-6 FPGAs." February 2, 2009. Retrieved February 2, 2009
  67. Ron Wilson, EDN, "Xilinx FPGA introductions hint at new realities." February 2, 2009. Retrieved on February 2, 2009.
  68. Brent Przybus, Xilinx, "Xilinx Redefines Power, Performance, and Design Productivity with Three New 28 nm FPGA Families: Virtex-7, Kintex-7, and Artix-7 Devices." June 21, 2010. Retrieved on June 22, 2010.
  69. Convergedigest. "Xilinx Ships First 28nm FPGA." Mar 18, 2011. Retrieved May 11, 2012.
  70. Clive Maxfield, EETimes. "Xilinx ships first 28nm Kintex-7 FPGAs." March 21, 2011. Retrieved May 11, 2012.
  71. "UltraScale MPSoC Architecture". Retrieved August 16, 2015.
  72. Ron Wilson, EDN. "Xilinx FPGA introductions hint at new realities Archived May 25, 2011, at the Wayback Machine.." February 2, 2009 Retrieved June 10, 2010.
  73. Design & Reuse. "New Xilinx Virtex-6 FPGA Family Designed to Satisfy Insatiable Demand for Higher Bandwidth and Lower Power Systems." February 2, 2009. Retrieved June 10, 2010.
  74. Company Release. "New Xilinx Virtex-6 FPGA Family Designed to Satisfy Insatiable Demand for Higher Bandwidth and Lower Power Systems." February 2, 2009. Retrieved February 2, 2009.
  75. DSP DesignLine. "Analysis: Xilinx debuts Virtex-5 FXT, expands SXT." June 13, 2008. Retrieved January 20, 2008.
  76. National Instruments. "Advantages of the Xilinx Virtex-5 FPGA." June 17, 2009. Retrieved June 29, 2010.
  77. 1 2 3 Mike Demler, EDN. "Xilinx integrates dual ARM Cortex-A9 MPCore with 28-nm, low-power programmable logic." March 1, 2011. Retrieved March 1, 2011.
  78. Clive Maxfield, EETimes. "Xilinx unveils new Zynq-7100 All Programmable SoCs." Mar 20, 2013. Retrieved Jun 3, 2013.
  79. "Axiom Alpha".
  80. "Zynq-based Axiom Alpha open 4K cine camera proto debuts in Vienna hackerspace". 2014-03-20.
  81. "snickerdoodle: create something different". Crowd Supply. Retrieved 2015-10-26.
  82. Daniel Harris, Electronic Design. "If only the original spartans could have thrived on so little power." February 27, 2008. Retrieved January 20, 2008.
  83. 1 2 Company Release. "The low-cost Spartan-6 FPGA family delivers an optimal balance of low risk, low cost, low power, and high performance." February 2, 2009.
  84. Kevin Morris, FPGA Journal. "Not Bad Die: Xilinx EasyPath Explained." May 27, 2008. Retrieved January 20, 2008.
  85. Best Places to Work Institute, Best Companies List. "Fortune 100 Best." Retrieved June 17, 2010.
  86. Global Semiconductor Alliance. "Global Semiconductor Alliance Announces Its 2008 Award Recipients." December 15, 2008. Retrieved June 29, 2010.
  87. 1 2 Press Release, "Xilinx Co-Founder Ross Freeman Honored as 2009 National Inventors Hall of Fame Inductee for Invention of FPGA." February 11, 2009. Retrieved February 11, 2009.
  88. Xilinx Fact Sheet
Wikimedia Commons has media related to Xilinx.
This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.