X.21

For other uses, see X21 (disambiguation).
X.21 15-pin D-Sub connector.

X.21 (sometimes referred to as X21) is an interface specification for differential communications introduced in the mid-1970s by the ITU-T. X.21 was first introduced as a means to provide a digital signaling interface for telecommunications between carriers and customers' equipment. This includes specifications for DTE/DCE physical interface elements, alignment of call control characters and error checking, elements of the call control phase for circuit switching services, and test loops.

When X.21 is used with V.11, it provides synchronous data transmission at rates from 600 bit/s to 10 Mbit/s. There is also a variant of X.21 that is only used in select legacy applications, “circuit switched X.21”. X.21 normally is found on a 15-pin D-Sub connector and is capable of running full-duplex data transmissions.

The Signal Element Timing, or clock, is provided by the carrier (your telephone company), and is responsible for correct clocking of the data. X.21 is primarily used in Europe and Japan, for example in the Scandinavian DATEX and German DATEX-L circuit switched networks during the 1980s.

References

Article based on X.21 at FOLDOC, and X.21 Pinouts, used with permission.

This article is issued from Wikipedia - version of the 3/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.