Whittingham Hospital Railway

Coordinates: 53°48′50″N 2°38′13″W / 53.814°N 2.637°W / 53.814; -2.637 The Whittingham Hospital Railway (W.H.R.) was a private light railway operated by Lancashire County Council to serve Whittingham lunatic asylum. Opened in 1889, it carried goods and passengers between Grimsargh on the Preston and Longridge Railway and the hospital grounds. It closed to all traffic in 1957.[1]

The asylum

Further information: Whittingham Hospital

The asylum was built in 1873 and enlarged in 1879 to accommodate 2895 patients.[2] Before becoming the hospital, it was the long-time residence of the Waring family. The house was built in 1869 by Cooper and Tullis of Preston, to the designs of Henry Littler for £338,000.[3]

In the early days of the hospital, all supplies, including coal and provisions, had to be transported by horse and cart from Preston – a distance of 7 miles (11 km) – or from Longridge at the terminus of the Preston and Longridge Railway some 3 12 miles (5.6 km) distant. The cartage was expensive; permanently staffed with a stud of horses and vehicles. In 1884, the significant costs of this operation prompted the authorities to consider building a railway between the hospital and the village of Grimsargh 2 miles (3.2 km) to the southeast.

The committees

A four-man committee made its first report in August, 1884 when it estimated the cost of the 2,863-yard (2,618 m) line at £12,000 giving an annual saving of £1,050 over road haulage but this assumed that the Lancashire and Yorkshire Railway and London and North Western Railway – joint owners of the Longridge branch line – would work the service.[4] They refused, but did grant junction facilities at Grimsargh.

Strong opposition from local land owners and a lack of support from the hospital's own Finance & General Committee stalled the project. Further revision of the cost brought the estimated price down to £9,000 but the project still could not gain sufficient support to proceed. Refusing to admit defeat, the committee obtained a hearing before the more senior General Committee who approved and the matter was placed before the Annual Session at Preston in 1885. Success was followed by the presentation of a Bill to Parliament that year at an initial cost of £550.[4]

The construction

A goods only, horse drawn operation was envisaged at this stage on the "proposed Whittingham Tramway". Prolonged financial negotiations with reluctant land-owners saw two years pass before the final plot of land for the line was acquired. With £10,000 allocated for construction the first sod was cut at Grimsargh in 1887 but work proceeded only with great difficulty. Land slips caused by an exceptionally bad winter of 1887 delayed completion and increased costs.[5] Finally in March 1889, the contractor reported that the permanent way was ready, but the Tramway Committee had to ask for a further £5,000 to complete the works plus purchase a locomotive and two goods vans.[6] Traffic for goods commenced in June 1889.[5]

At £14,000, the construction price was not overly expensive for its day, comprising a deep cutting about a half mile (800 m) in length and an embankment in similar proportion. Two substantial bridges were also required, one of which was a skew bridge construction.[7]

Further expansion took place in 1921/22 when the line was extended to a new boiler house at a cost of £3,200. The total length of the railway was then 3,386 yards (3,096 m).

The railway described

Stations

The railway had two substantially built stations, one at each terminus, the one at Grimsargh being diagonally opposite the level crossing from the mainline station. This station had the only run-around loop on the railway and a connection with the Preston and Longridge branch facing in the direction of Longridge. Two sidings were also provided. On a single short platform, the station building comprised an open fronted shed of brick and wood with an overall roof and canopy. The building was some 40 ft (12 m) in length by 12 ft (3.7 m) wide with a 10 ft (3.0 m) waiting room at the Longridge end.[8]

The station at Whittingham Hospital was of brick and corrugated iron construction which sported an overall glass roof above its single wooden platform and track. Access was by the means of steps as the station was situated on a high embankment.[9]

The line

The route of the branch commenced on the north side of the level crossing in Grimsargh and curved sharply westward on a falling gradient into the deep cutting and on to the embankment before crossing Brabiner Lane.[10] The line then climbed on a gradient of 1:120 to the hospital grounds passing over a small accommodation bridge before entering Whittingham station.[7] A small coal storage area and engine shed existed beyond the hospital station[11] and the 1921 extension continued for 523 yards (478 m) across the hospital lawns, beside the fish pond, to the boiler house.[12]

Rolling stock

Locomotives

The first locomotive purchased by the W.H.R. was an 0-4-0 saddle-tank (works number 304) built by Andrew Barclay & Sons Co. in 1888 at their Caledonia Works, Kilmarnock.[6][11]

The original locomotive was fitted with outside cylinders gave good service until 1947 when it was scrapped. A further Barclay locomotive (works number 1024) arrived in 1904 becoming No. 2.[11] It sported a 0-4-2 wheel arrangement with identical cylinders to engine No. 1, and 4 ft 1 in (1.24 m) wheels. This locomotive worked until 1952 when it was also scrapped.

W.C.M.H.R. Locomotives (1888–1947)[5]
No. 1 No. 2
Type 0-4-0 saddle tank 0-4-2 side tank
Builder Andrew Barclay & Sons Co. Andrew Barclay & Sons Co.
Works Number 304 1026
Date 1888 1904
Cylinders 13 x 20 inch stroke 13 x 20 inch stroke
Boiler 120 pounds per square inch (830 kPa) 160 pounds per square inch (1,100 kPa)
Coupled wheels 3 ft 7 in dia. 5 ft 6 in (1.68 m) centres 4 ft 1 in dia. 5 ft 6 in (1.68 m) centres
Trailing wheels 3 ft 0 in dia. 2 in radial
Total wheelbase 5 ft 6 in (1.68 m) 12 ft 4 in
Heating surface: Boiler 440 sq ft (41 m2) 460 sq ft (43 m2)
Heating surface: Firebox 48 sq ft (4.5 m2) 52 sq ft (4.8 m2)
Capacities: Water 640 imperial gallons (2,900 litres) 640 imperial gallons (2,900 litres)
Capacities: Coal 10 cwt 25 cwt
Locomotive weight: Empty 19 ton, 5 cwt 21 ton, 5 cwt
Locomotive weight: Loaded 23 ton, 5 cwt 25 ton, 0 cwt

With the scrapping of No. 1 just following the Second World War, new steam locomotives were only available on four year lead times, therefore a second-hand engine was acquired in 1947 from the Southern Railway at a cost of £750. This was a William Stroudley 0-4-2 D1 Tank and was named James Fryers in honour of the Chairman of the Hospital Management Committee.[13][14] The engine was originally built for the London, Brighton and South Coast Railway in 1886. Numbered 357, it carried the name Riddlesdown.[15] In Southern Railway service it bore the number 2357.[16] Serious boiler defects in 1956 curtailed its working career and the engine met the scrap-man that year when it proved beyond economic repair. Before scrapping, it was the sole surviving member of its class.[17]

A further locomotive was thus required and a 100 hp (75 kW) Sentinel shunter, named Gradwell, was acquired from Bolton gas works. It worked for only 18 months before the line was closed.

Goods and passenger vehicles

For the opening of the line, two goods vans were acquired. Notwithstanding the committee's remit to convey only goods traffic the original desire to transport passengers was facilitated by the purchase of a carriage from the Lancaster Wagon Company. Five more were later acquired; all four-wheelers: two from North London Railway and the others locally from the Lancashire and Yorkshire Railway. In later life, these were replaced by three ex-L.N.W.R Diagram 17A 20 ton goods brake vans that were converted by the hospital joiners.[11] Gas lighting was also fitted.[7] An ex-Midland Railway van was purchased as a goods van to be attached onto the train made up of brake vans, it was later cut down to size and used as a PW wagon.

Operating the railway

As well as carrying the goods needs of the hospital – mainly coal – a regular booked service of passenger trains was operated. In addition to serving the needs of the asylum's visitors and staff, the trains were available to any member of the public and were free of charge to all users.[18] With the closure of the Longridge branch to passengers in 1930, the hospital trains were retimed to connect with the local bus service from Preston.[19] About nine passenger trains ran each day – Sundays excepted. In 1918, 3000 passengers per week used the line and the annual tonnage of freight exceeded 12,000 tons (12,200 tonnes).[16]

Being single track with a passing loop only at the Grimsargh end, it was the practice for many years to propel the train from Whittingham.[11] However, following an accident involving some cattle, the train was subsequently pulled by the engine in each direction. Running around was achieved at Whittingham by hauling the train into a siding using a cable.[20] until its replacement by a BSA Truck Mover.[lower-roman 1]

Decline and closure

In 2013

With declining economic circumstances, the line closed to all traffic on 29 June 1957 following the 7:20 pm service from Grimsargh to Whittingham. Mr G. Wright, who had spent his entire working life as a driver on the Whittingham Hospital Railway was at the controls.[22] After closure, the trackwork was soon lifted and the cutting filled in.[16] The bridge over Brabiner Lane survived until the late 1970s but was subsequently demolished. Housing has been built on the Grimsargh station site and Whittingham Hospital itself closed in 1995.

See also

Notes

  1. A bicycle-like barrow, powered by a single cylinder two-stroke petrol engine and controlled by one operator holding a pair of handlebars[21]
  1. Biddle (1989), 40; see also 1822 and pl. 4551
  2. Jones (1958), 343; Rossbret (2005)
  3. Parker (1972), 23
  4. 1 2 Jones (1958), 344
  5. 1 2 3 Parker (1972), 24
  6. 1 2 Jones (1958); 345
  7. 1 2 3 Parker (1972), 25
  8. Biddle (1989), pl. 45 and map
  9. Biddle (1989), pl. 49 & 50
  10. Boyd (2007), p. 72
  11. 1 2 3 4 5 See Boyd (2007) for an illustration
  12. Biddle (1989), pl. 51
  13. Bland (1952) provides an excellent photograph of James Fryers, the three brake vans and engine shed on 1 September 1951
  14. Southern E-Group (2007) has examples of the locomotive type
  15. Casserley (1957), 313; Southern E-Group (2007), 3: data though Parker (1972), 26 gives the name as Riddlestown
  16. 1 2 3 Parker (1972), 26
  17. Casserley (1957), 313
  18. Jones (1958), 349
  19. Biddle (1989), 18
  20. Casserley (1957), 320
  21. "BSA Truck Mover". Warwickshire Railways.
  22. Biddle (1989), pl. 47 & 48

References

External links

This article is issued from Wikipedia - version of the 11/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.