Wabash Avenue Bridge

Wabash Avenue Bridge

Wabash Avenue Bridge at night
Coordinates 41°53′17″N 87°37′37″W / 41.887924°N 87.626839°W / 41.887924; -87.626839Coordinates: 41°53′17″N 87°37′37″W / 41.887924°N 87.626839°W / 41.887924; -87.626839
Carries Automobiles
Pedestrians
Crosses Chicago River
Locale Chicago, Cook County, Illinois
Official name Irv Kupcinet Bridge
Other name(s) Wabash Avenue Bridge
Maintained by Chicago Department of Transportation
ID number 000016605226647
Characteristics
Design Double-leaf bascule bridge
Total length 345 feet (105 m)
Width 90 feet (27 m)
Longest span 232 feet (71 m)
Number of spans 3
Clearance below 22 feet (7 m)
History
Designer Thomas Pihlfeldt
Opened 1930
Statistics
Daily traffic 5,800[1]

The Wabash Avenue Bridge (officially, Irv Kupcinet Bridge) over the Chicago River was built in 1930. Standing west of the Michigan Avenue Bridge and east of Marina City, the bascule bridge connects the Near North Side with "The Loop" area.

The single-deck, double-leaf bascule bridge was designed by Thomas Pihlfeldt and built by the Ketler and Elliot Company.[2] The American Institute of Steel Construction awarded it the "Most Beautiful" bridge in 1930.[2]

The control houses for controlling bridge operations are on the northwest and southwest corners of the bridge. The control houses are identical in design. In 1961 the control houses were upgraded to allow single man operation. Electrical modernization also accompanied this upgrade. While the northern control house is no longer in use, it still stands.[2]

See also

References

Wabash Avenue Bridge summer 1999 in a photo from the National Park Service
  1. "NBI Structure Number: 000016605226647". Retrieved 2009-05-18.
  2. 1 2 3 National Park Service. "Historic American Engineering Record". Retrieved 2009-05-18.
Wikimedia Commons has media related to Wabash Avenue Bridge.
This article is issued from Wikipedia - version of the 11/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.