Voltigeur-class destroyer

Class overview
Name: Voltigeur class
Operators:  French Navy
Preceded by: Spahi class
Succeeded by: Chasseur class
Built: 190810
In service: 191021
Completed: 2
Scrapped: 2
General characteristics
Type: Destroyer
Displacement:
Length: 63–65.5 m (206 ft 8 in–214 ft 11 in) (p/p)
Beam: 6.4–6.8 m (21 ft 0 in–22 ft 4 in)
Draft: 2.9–3.1 m (9 ft 6 in–10 ft 2 in)
Installed power:
Propulsion: 3 shafts; 2 Triple-expansion steam engines and 1 steam turbine
Speed: 28 knots (52 km/h; 32 mph)
Range: 1,520 nmi (2,820 km; 1,750 mi) at 10 knots (19 km/h; 12 mph)
Complement: 76–77
Armament:
  • 6 × single 65 mm (2.6 in) guns
  • 3 × 450 mm (17.7 in) torpedo tubes

The Voltigeur class was a pair of two destroyers built for the French Navy in the first decade of the 20th century. Both ships survived the First World War and were scrapped afterwards.

The ships were modelled on the preceding Spahi-class destroyer. The machinery consisted of three shafts: the central shaft had a triple expansion engine for economical cruising and the two outer shafts had Rateau (Voltigeur) or Breguet (Tirailleur) turbines for additional speed, all powered by four Normand (Voltigeur) or Du Temple (Tirailleur) boilers.

Ships

Citations

    Bibliography


    This article is issued from Wikipedia - version of the 12/16/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.