Wanamassa (YTB-820)

Wanamassa (YTB-820)
Wanamassa (YTB-820)
History
United States
Namesake: Wanamassa, New Jersey
Awarded: 9 August 1971
Builder: Marinette Marine Corporation, Marinette, Wisconsin
Laid down: 28 October 1972
Launched: 4 May 1973
Acquired: 28 July 1973
Status: Active
General characteristics
Class and type: Natick-class large harbor tug
Displacement:
  • 286 long tons (291 t) (light)
  • 346 long tons (352 t) (full)
Length: 108 ft (33 m)
Beam: 31 ft (9.4 m)
Draft: 14 ft (4.3 m)
Installed power: 2000 horsepower (1.5 MW)
Propulsion: one diesel engine, one screw
Speed: 12 knots (14 mph; 22 km/h)
Complement: 12

Wanamassa (YTB-820) is a United States Navy Natick-class large harbor tug named for Wanamassa, New Jersey.[1]

Construction

The contract for Wanamassa was awarded 9 August 1971. She was laid down on 28 October 1972 at Marinette, Wisconsin, by Marinette Marine and launched 4 May 1973.

Operational history

Wanamassa, moored at Pier Tango, Guantanamo, on 1 April 2015, when she was one of the last five tugs of her class to remain in service

Delivered to the U.S. Navy on 28 July 1973, Wanamassa was initially assigned to the 10th Naval District and operated out of San Juan, Puerto Rico, aiding ships in berthing and docking maneuvers and standing ready to provide waterfront fire protection.

In the latter half of the 1970s, she was transferred to the Guantanamo Bay Naval Base, in Cuba. She remained in active service at Guantanamo as late as April 2015.[2] The three Natick class tugs at Guantanamo remain among the last five to remain in service.

References

  1. "Wanamassa (YTB-820)". Retrieved 2011-12-03.
  2. Daryl T. Madrid (1 April 2015). "The tugboats of Guantanamo" (PDF). The Wire. Guantanamo Bay Naval Base. p. 6. Retrieved 2015-04-13.
Wikimedia Commons has media related to Wanamassa (YTB-820).


This article is issued from Wikipedia - version of the 6/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.