Transcritical cycle

Thermodynamics
The classical Carnot heat engine
Branches Classical Statistical Chemical Equilibrium / Non-equilibrium
Laws Zeroth First Second Third
Systems State Equation of state Ideal gas Real gas State of matter Equilibrium Control volume Instruments Processes Isobaric Isochoric Isothermal Adiabatic Isentropic Isenthalpic Quasistatic Polytropic Free expansion Reversibility Irreversibility Endoreversibility Cycles Heat engines Heat pumps Thermal efficiency
System properties Note: Conjugate variables in italics Property diagrams Intensive and extensive properties Functions of state Temperature / Entropy (introduction) Pressure / Volume Chemical potential / Particle number Vapor quality Reduced properties Process functions Work Heat
Material properties Property databases Specific heat capacity  Compressibility  Thermal expansion
Equations Carnot's theorem Clausius theorem Fundamental relation Ideal gas law Maxwell relations Onsager reciprocal relations Bridgman's equations Table of thermodynamic equations
Potentials Free energy Free entropy Internal energy Enthalpy Helmholtz free energy Gibbs free energy
History Culture History General Heat Entropy Gas laws "Perpetual motion" machines Philosophy Entropy and time Entropy and life Brownian ratchet Maxwell's demon Heat death paradox Loschmidt's paradox Synergetics Theories Caloric theory Theory of heat Vis viva ("living force") Mechanical equivalent of heat Motive power Key publications "An Experimental Enquiry Concerning ... Heat" "On the Equilibrium of Heterogeneous Substances" "Reflections on the Motive Power of Fire" Timelines Thermodynamics Heat engines Art Education Maxwell's thermodynamic surface Entropy as energy dispersal
Scientists Bernoulli Carnot Clapeyron Clausius Carathéodory Duhem Gibbs von Helmholtz Joule Maxwell von Mayer Onsager Rankine Smeaton Stahl Thompson Thomson Waterston
Book:Thermodynamics

A transcritical cycle is a thermodynamic cycle where the working fluid goes through both subcritical and supercritical states. This is often the case when carbon dioxide, CO₂, is the refrigerant.

The modern transcritical cycle was developed in 1988–1991 by the Norwegian professor Gustav Lorentzen (1915–1995) and his team.^[1]

Carbon dioxide requires a high pressure diffence for efficient use as a refrigerant, the compression is performed in two stages for the greatest efficiency. In the example rolling piston compressor,^[2] the two pistons are placed 180 degrees apart to reduce the noise and vibration. The first stage discharges into the shell, holding it at the intermediate pressure, it then enters the intermediate cooler and returns into the shell for the second stage of compression and is then discharged into the gas cooler (Because CO₂ has less pressure drop, the use of microchannel heat exchangers have enhanced performance over round tubes, reducing the size and weight), before going to the suction line heat exchanger to cool the gas with the waste cooling from the evaporator. This then goes to the expansion device (a capillary tube) and to the evaporator.

The intermediate pressure design reduces the pressure difference at start and stop, it increases the reliability against shell fatigue and allows the shell thickness to be 35% thinner than a compressor with a high internal pressure, reducing the weight, almost equalling a conventional R-410A compressor. The cabinet reached the desired temperature as fast as the R-134A comparison compressor, although the R-134A comparison was a little more efficient while the cabinet was at a higher temperature. The CO₂ compressor was confirmed to consume 20% less energy during the test.

See also

• EcoCute

References