4-Toluenesulfonyl chloride

4-Toluenesulfonyl chloride
Names
IUPAC name
4-methylbenzenesulfonyl chloride
Other names
Tosyl chloride, p-toluenesulfonyl chloride, p-TsCl, TsCl
Identifiers
98-59-9 YesY
3D model (Jmol) Interactive image
ChemSpider 7119 YesY
ECHA InfoCard 100.002.441
PubChem 160808444
Properties
C7H7ClO2S
Molar mass 190.65 g/mol
Appearance White solid
Melting point 65 to 69 °C (149 to 156 °F; 338 to 342 K)
Boiling point 134 °C (273 °F; 407 K) at 10 mmHg
Hydrolysis
Hazards[1]
Main hazards Releases acid
NFPA 704
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g., canola oil Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
1
3
0
Flash point 128 °C (262 °F; 401 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

4-Toluenesulfonyl chloride (p-toluenesulfonyl chloride, toluene-p-sulfonyl chloride) is an organic compound with the formula CH3C6H4SO2Cl. This white, malodorous solid is a reagent widely used in organic synthesis.[2] Abbreviated TsCl or TosCl, it is a derivative of toluene and contains a sulfonyl chloride (-SO2Cl) functional group.

Uses

Main article: Tosyl

In characteristic manner, TsCl converts alcohols (abbreviated ROH) into the corresponding toluenesulfonate esters, or tosyl derivatives ("tosylates"):

CH3C6H4SO2Cl + ROH → CH3C6H4SO2OR + HCl

Tosylates can be cleaved with lithium aluminium hydride:

4 CH3C6H4SO2OR + LiAlH4 → LiAl(O3SC6H4CH3)4 + 4 RH

Thus, tosylation followed by reduction allows for removal of a hydroxyl group.

Likewise, TsCl is used to prepare sulfonamides from amines:[3]

CH3C6H4SO2Cl + R2NH → CH3C6H4SO2NR2 + HCl

The resulting sulfonamides are non-basic and, when derived from primary amines, are even acidic.

The preparation of tosyl esters and amides are conducted in the presence of a base, which absorbs hydrogen chloride. The selection of the base is often crucial to the efficiency of tosylation. Typical bases include pyridine and triethylamine. Unusual bases are also used; for example, catalytic amounts of trimethylammonium chloride in the presence of triethylamine is highly effective by virtue of the trimethylamine.[2]

Other reactions

Being a widely available reagent, TsCl has been heavily examined from the perspective of reactivity. It is used in dehydrations to make nitriles, isocyanides and diimides.[2] In an unusual reaction focusing on the sulfur center, zinc reduces TsCl to the sulfinate, CH3C6H4SO2Na.[4]

Manufacture

TsCl is inexpensively available for laboratory use. It is a by-product from the production of o-toluenesulfonyl chloride (a precursor for the synthesis of saccharin), via the chlorosulfonation of toluene:[5]

CH3C6H5 + SO2Cl2 → CH3C6H4SO2Cl + HCl

References

  1. ↑ http://chemicalland21.com/specialtychem/finechem/p-TOLUENESULFONYL%20CHLORIDE.htm
  2. 1 2 3 Whitaker, D. T.; Whitaker, K. S.; Johnson, C. R.; Haas, J. (2006). "p-Toluenesulfonyl Chloride". Encyclopedia of Reagents for Organic Synthesis. New York: John Wiley. doi:10.1002/047084289X.rt136.pub2.
  3. ↑ Ichikawa, J.; Nadano, R.; Mori, T.; Wada, Y. (2006). "5-endo-trig Cyclization of 1,1-Difluoro-1-alkenes: Synthesis of 3-Butyl-2-Fluoro-1-Tosylindole". Org. Synth. 83: 111.; Coll. Vol., 11, p. 834
  4. ↑ Whitmore, F. C.; Hamilton, F. H. (1922). "Sodium Toluenesulfinate". Org. Synth. 2: 89.; Coll. Vol., 1, p. 492
  5. ↑ Lindner, O.; Rodefeld, L. (2005), "Benzenesulfonic Acids and Their Derivatives", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a03_507
This article is issued from Wikipedia - version of the 5/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.