Titanium butoxide

Titanium butoxide
Names
IUPAC name
titanium(4+) butan-1-olate
Other names
Titanium(IV) butoxide, titanium n-butoxide, titanium tetrakis(butoxide), butyl titanate, tetrabutoxy titanium, titanium tetrabutoxide, tetrabutoxytitanium, tetrabutyltitanate, tetrabutyl orthotitanate, titanium tetrabutanolate[1][2]
Identifiers
5593-70-4
3D model (Jmol) Interactive image
ChemSpider 20491
EC Number 227-006-8
PubChem 21801
UNII FJS8Q2MX9I
UN number 2920
Properties
C16H36O4Ti
Molar mass 340.32164
Odor weak alcohol-like[1]
Density 0.998 g/cm3[1]
Melting point -55 °C[1]
Boiling point 312 °C[1]
decomposes[1]
Solubility most organic solvents except ketones[1]
1.486[1]
Thermochemistry
711 J/(mol·K)[2]
-1670 kJ/mol[2]
Hazards
Lethal dose or concentration (LD, LC):
3122 mg/kg (rat, oral) and 180 mg/kg (mouse, intravenal).[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Titanium butoxide is an organometallic chemical compound with the formula Ti(OBu)4 (Bu = CH2CH2CH2CH3). It is a colorless to pale-yellow liquid with a weak alcohol-like odor and density almost equal to that of water. It is soluble in most organic solvents, but decomposes in water and reacts violently with oxidizing materials.[1][3] Decomposition in water is not hazardous, and therefore titanium butoxide is often used as a liquid source of titanium dioxide, which allows deposition of TiO2 coatings of various shapes and sizes down to the nanoscale.[4][5]

Reactions and hazard

SEM (top) and TEM (bottom) images of chiral TiO2 nanofibers produced by depositing titanium butoxide on carbon nanofibers. Carbon was removed the heating in air.[4]

Titanium butoxide is produced by reacting titanium tetrachloride with butanol. When mixed with water it decomposes to titanium dioxide and butanol. This decomposition is not hazardous,[1] and is often used as a source of titanium dioxide.[4][5]

Titanium butoxide is a corrosive, flammable liquid incompatible with oxidizing materials. It reacts violently with sulfuric and nitric acid, inorganic hydroxides and peroxides, bases, amines, amides, isocyanates and boranes. It is irritating to skin and eyes, and causes nausea and vomiting if swallowed. LD50 is 3122 mg/kg (rat, oral) and 180 mg/kg (mouse, intravenal); flash point is 77 °C. When heated it emits irritating fumes,[1] which form explosive mixtures with air at concentrations above 2 vol%.[3]

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Butyl titanate. pubchem.ncbi.nlm.nih.gov
  2. 1 2 3 Tetrabutyl titanate. nist.gov
  3. 1 2 Pohanish, Richard P.; Greene, Stanley A. (2009). Wiley Guide to Chemical Incompatibilities. John Wiley & Sons. p. 1010. ISBN 978-0-470-52330-8.
  4. 1 2 3 Wang, Cui (2015). "Hard-templating of chiral TiO2 nanofibres with electron transition-based optical activity". Science and Technology of Advanced Materials. 16 (5): 054206. Bibcode:2015STAdM..16e4206W. doi:10.1088/1468-6996/16/5/054206. PMC 5070021Freely accessible. PMID 27877835.
  5. 1 2 Wu, Limin; Baghdachi, Jamil (2015). Functional Polymer Coatings: Principles, Methods, and Applications. Wiley. p. 10. ISBN 978-1-118-88303-7.
This article is issued from Wikipedia - version of the 11/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.