Tilt-A-Whirl

This article is about the amusement park ride. For the band formerly known as Tilt-A-Whirl, see Arcwelder.
A Tilt-A-Whirl

Tilt-A-Whirl is a flat ride similar to the Waltzer in Europe, designed for commercial use at amusement parks, fairs and carnivals, in which it is commonly found.[1] The rides are manufactured by Larson International of Plainview, Texas.

The Tilt-A-Whirl is a platform-type ride, consisting of seven freely-spinning cars that hold three or four riders each, which are attached at fixed pivot points on a rotating platform. As the platform rotates, parts of the platform are raised and lowered, with the resulting centrifugal and gravitational forces on the cars cause them to spin in different directions and at variable speeds. The weight of passengers in these cars (as well as the weight distribution) may intensify or dampen the spinning motion of the cars, adding to the unpredictable nature of the motion.

Description

The Tilt-A-Whirl is a flat ride designed for commercial use at amusement parks, fairs and carnivals, in which it is commonly found. It is a platform-type ride similar to the Waltzer in Europe. The ride consists of seven freely-spinning cars that hold three or four riders each, which are attached at fixed pivot points on a rotating platform. As the platform rotates, parts of the platform are raised and lowered, with the resulting centrifugal and gravitational forces on the revolving cars causing them to spin in different directions and at variable speeds. The weight of passengers in these cars (as well as the weight distribution) may intensify or dampen the spinning motion of the cars, adding to the unpredictable nature known as chaotic motion.

Physicists Bret M. Huggard and Richard L. Kautz came up with a mathematical equation that approximates the motion of the Tilt-A-Whirl.[2] Although it was without knowledge of chaos theory that Herbert Sellner invented the ride, in his patent text he clearly demonstrates an appreciation of chaos: "A further object is to provide amusement apparatus wherein the riders will be moved in general through an orbit and will unexpectedly swing, snap from side to side or rotate without in any way being able to figure what movement may next take place in the car."[3]

History

Herbert W. Sellner, a woodworker and maker of water slides, invented the Tilt-A-Whirl in 1926 at his Faribault, Minnesota, home. In 1927, the first 14 Tilt-A-Whirls were built in Herbert's basement and yard. Sellner Manufacturing opened its factory in Faribault and the ride debuted at the Minnesota State Fair.

The earliest Tilt-A-Whirls were constructed of wood, powered by gas motors, and featured nine cars. Modern rides are constructed of steel, aluminum and fiberglass, and it is powered by seven small electric motors, and has seven cars.

In 1995, Tovah Sellner took over Sellner Manufacturing after the loss of her husband Bruce Sellner; her daughter Erin Sellner joined her in 1998 and the two of them ran the business together.

Modern Tilt-A-Whirls

In 1927, Sellner started manufacturing Tilt-A-Whirls, and more than a thousand rides were built. Some of the rides produced in the 1940s and 1950s are still in operation. The rides were originally designed and built at the factory in Faribault, Minnesota.

Modern Tilt-A-Whirls cost in excess of USD $300,000 to purchase.

The oldest operating Tilt-A-Whirl is a 1927 model, traveling with Tom Evans United Shows in the US Midwest. Between six- and seven hundred Tilt-A-Whirls are in operation.

Conneaut Lake Park in Conneaut Lake, Pennsylvania still has its original Tilt-A-Whirl from 1949.

References

  1. Rides for Amusement Parks, Carnivals, and Fairs – Made in the USA
  2. Kautz, R.L., and B.M. Huggard. 1994. Chaos at the amusement park: Dynamics of the Tilt-A-Whirl. American Journal of Physics 62(January):59.
  3. U.S. Patent 1,745,719 The Tilt-A-Whirl patent.

Further reading

Wikimedia Commons has media related to Tilt-A-Whirl.
This article is issued from Wikipedia - version of the 9/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.