Threshold braking

Threshold braking or limit braking is a driving technique most commonly used in motor racing, but also practiced in road vehicles to slow a vehicle at the maximum rate using the brakes. [1] The technique involves the driver controlling the brake pedal (or lever) pressure to maximize the braking force developed by the tires. The optimal amount of braking force is developed at the point when the wheel just begins to slip.

Kinetic and static friction

Braking beyond the slipping point causes the tire to slide and the frictional adhesion between the tire and driving surface is reduced. The aim of threshold braking is to keep the amount of tire slip at the optimal amount, the value that produces the maximum frictional, and thus braking force. When wheels are slipping significantly (kinetic friction), the amount of friction available for braking is typically substantially less than when the wheels are not slipping (static friction), thereby reducing the braking force. Peak friction occurs between the static and dynamic endpoints, and this is the point that threshold braking tries to maintain.

Other factors

Because available friction at a given moment depends on many factors including road surface material, temperature, tire rubber compound and wear, threshold braking is difficult to consistently achieve during normal driving.

See also

References

  1. ↑ "SGI - Driver's Handbook". SGI. Retrieved 2014-02-11.
This article is issued from Wikipedia - version of the 8/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.