Alkyne

A 3D model of ethyne (acetylene), the simplest alkyne

In organic chemistry, an alkyne is an unsaturated hydrocarbon containing at least one carbon—carbon triple bond.^[1] The simplest acyclic alkynes with only one triple bond and no other functional groups form a homologous series with the general chemical formula C_nH_2n−2. Alkynes are traditionally known as acetylenes, although the name acetylene also refers specifically to C₂H₂, known formally as ethyne using IUPAC nomenclature. Like other hydrocarbons, alkynes are generally hydrophobic but tend to be more reactive.

Chemical properties

Alkynes are characteristically more unsaturated than alkenes. Thus they add two equivalents of bromine whereas an alkene adds only one equivalent in the reaction. Other reactions are listed below. In some reactions, alkynes are less reactive than alkenes. For example, in a molecule with an -ene and an -yne group, addition occurs preferentially at the -ene.^[2] Possible explanations involve the two π-bonds in the alkyne delocalising, which would reduce the energy of the π-system or the stability of the intermediates during the reaction. They show greater tendency to polymerize or oligomerize than alkenes do. The resulting polymers, called polyacetylenes (which do not contain alkyne units) are conjugated and can exhibit semiconducting properties.

Structure and bonding

In acetylene, the H–C≡C bond angles are 180°. By virtue of this bond angle, alkynes are rod-like. Correspondingly, cyclic alkynes are rare. Benzyne is highly unstable. The C≡C bond distance of 121 picometers is much shorter than the C=C distance in alkenes (134 pm) or the C–C bond in alkanes (153 pm).

Illustrative alkynes: a, acetylene, b, two depictions of propyne, c, 1-butyne, d, 2-butyne, e, the naturally-occurring 1-phenylhepta-1,3,5-triyne, and f, the strained cycloheptyne. Triple bonds are highlighted blue.

The triple bond is very strong with a bond strength of 839 kJ/mol. The sigma bond contributes 369 kJ/mol, the first pi bond contributes 268 kJ/mol and the second pi-bond of 202 kJ/mol bond strength. Bonding usually discussed in the context of molecular orbital theory, which recognizes the triple bond as arising from overlap of s and p orbitals. In the language of valence bond theory, the carbon atoms in an alkyne bond are sp hybridized: they each have two unhybridized p orbitals and two sp hybrid orbitals. Overlap of an sp orbital from each atom forms one sp–sp sigma bond. Each p orbital on one atom overlaps one on the other atom, forming two pi bonds, giving a total of three bonds. The remaining sp orbital on each atom can form a sigma bond to another atom, for example to hydrogen atoms in the parent acetylene. The two sp orbitals project on opposite sides of the carbon atom.

Terminal and internal alkynes

Internal alkynes feature carbon substituents on each acetylenic carbon. Symmetrical examples include diphenylacetylene and 3-hexyne.

Terminal alkynes have the formula RC₂H. An example is methylacetylene (propyne using IUPAC nomenclature). Terminal alkynes, like acetylene itself, are mildly acidic, with pK_a values of around 25. They are far more acidic than alkenes and alkanes, which have pK_a values of around 40 and 50, respectively. The acidic hydrogen on terminal alkynes can be replaced by a variety of groups resulting in halo-, silyl-, and alkoxoalkynes. The carbanions generated by deprotonation of terminal alkynes are called acetylides.^[3]

Naming alkynes

In systematic chemical nomenclature, alkynes are named with the Greek prefix system without any additional letters. Examples include ethyne or octyne. In parent chains with four or more carbons, it is necessary to say where the triple bond is located. For octyne, one can either write 3-octyne or oct-3-yne when the bond starts at the third carbon. The lowest number possible is given to the triple bond. When no superior functional groups are present, the parent chain must include the triple bond even if it is not the longest possible carbon chain in the molecule. Ethyne is commonly called by its trivial name acetylene.

In chemistry, the suffix -yne is used to denote the presence of a triple bond. In organic chemistry, the suffix often follows IUPAC nomenclature. However, inorganic compounds featuring unsaturation in the form of triple bonds may be denoted by substitutive nomenclature with the same methods used with alkynes (i.e. the name of the corresponding saturated compound is modified by replacing the "-ane" ending with "-yne"). "-diyne" is used when there are two triple bonds, and so on. The position of unsaturation is indicated by a numerical locant immediately preceding the "-yne" suffix, or 'locants' in the case of multiple triple bonds. Locants are chosen so that the numbers are low as possible. "-yne" is also used as an infix to name substituent groups that are triply bound to the parent compound.

Sometimes a number between hyphens is inserted before it to state which atoms the triple bond is between. This suffix arose as a collapsed form of the end of the word "acetylene". The final "-e" disappears if it is followed by another suffix that starts with a vowel.^[4]

Synthesis

Commercially, the dominant alkyne is acetylene itself, which is used as a fuel and a precursor to other compounds, e.g., acrylates. Hundreds of millions of kilograms are produced annually by partial oxidation of natural gas:^[5]

2 CH₄ +  ³⁄₂ O₂ → HC≡CH + 3 H₂O

Propyne, also industrially useful, is also prepared by thermal cracking of hydrocarbons. Most other industrially useful alkyne derivatives are prepared from acetylene, e.g. via condensation with formaldehyde.^[5]

Specialty alkynes are prepared by dehydrohalogenation of vicinal alkyl dihalides or vinyl halides.^[6] Metal acetylides can be coupled with primary alkyl halides. Via the Fritsch–Buttenberg–Wiechell rearrangement, alkynes are prepared from vinyl bromides. Alkynes can be prepared from aldehydes using the Corey–Fuchs reaction and from aldehydes or ketones by the Seyferth–Gilbert homologation. In the alkyne zipper reaction, alkynes are generated from other alkynes by treatment with a strong base.

Reactions

Featuring a reactive functional group, alkynes participate in many organic reactions.

Addition of hydrogen, halogens, and related reagents

Alkynes characteristically undergo reactions that show that they are "doubly unsaturated", meaning that each alkyne unit is capable of adding two equivalents of H₂, halogens or related HX reagents (X = halide, pseudohalide, etc.). Depending on catalysts and conditions, alkynes add one or two equivalents of hydrogen. Partial hydrogenation, stopping after the addition of only one equivalent to give the alkene, is usually more desirable since alkanes are less useful:

RC≡CR′ + H₂ → cis-RCH=CR′H

The largest scale application of this technology is the conversion of acetylene to ethylene in refineries. The steam cracking of alkanes yields a few percent acetylene, which is selectively hydrogenated in the presence of a palladium/silver catalyst. For more complex alkynes, the Lindlar catalyst is widely recommended to avoid formation of the alkane, for example in the conversion of phenylacetylene to styrene.^[7]

Similarly, halogenation of alkynes gives the vinyl dihalides or alkyl tetrahalides:

RC≡CR′ + 2 Br₂ → RCBr₂CR′Br₂

The addition of nonpolar E–H bonds across C≡C is general for silanes, boranes, and related hydrides. The hydroboration of alkynes gives vinylic boranes which oxidize to the corresponding aldehyde or ketone. In the thiol-yne reaction the substrate is a thiol.

Acid-promoted addition reactions are likewise analogous to those of alkenes, including Markovnikov selectivity. Hydrohalogenation gives the corresponding vinyl halides or alkyl dihalides, again depending on the number of equivalents of HX added. The hydration reaction gives an enol via the addition of one equivalent of water, a structure that tautomerizes to form a ketone or aldehyde. For example, the hydration of phenylacetylene gives acetophenone,^[8] and the (Ph₃P)AuCH₃-catalyzed hydration of 1,8-nonadiyne to 2,8-nonanedione:^[9]

PhC≡CH + H₂O → PhCOCH₃

HC≡CC₆H₁₂C≡CH + 2H₂O → CH₃COC₆H₁₂COCH₃

Cycloadditions and oxidation

Alkynes undergo diverse cycloaddition reactions. Most notable is the Diels–Alder reaction with 1,3-dienes to give 1,4-cyclohexadienes. This general reaction has been extensively developed and electrophilic alkynes are especially effective dienophiles. The "cycloadduct" derived from the addition of alkynes to 2-pyrone eliminates carbon dioxide to give the aromatic compound. Other specialized cycloadditions include multicomponent reactions such as alkyne trimerisation to give aromatic compounds and the [2+2+1]-cycloaddition of an alkyne, alkene and carbon monoxide in the Pauson–Khand reaction. Non-carbon reagents also undergo cyclization, e.g. Azide alkyne Huisgen cycloaddition to give triazoles. Cycloaddition processes involving alkynes are often catalyzed by metals, e.g. enyne metathesis and alkyne metathesis, which allows the scrambling of carbyne (RC) centers:

RC≡CR + R′C≡CR′ ⇌ 2 RC≡CR′

Oxidative cleavage of alkynes proceeds via cycloaddition to metal oxides. Most famously, potassium permanganate converts alkynes to a pair of carboxylic acids.

Reactions specific for terminal alkynes

In addition to undergoing the reactions characteristic of internal alkynes, terminal alkynes are reactive as weak acids, with pK_a values (25) between that of ammonia (35) and ethanol (16). The acetylide conjugate base is stabilized as a result of the high s character of the sp orbital, in which the electron pair resides. Electrons in an s orbital benefit from closer proximity to the positively charged atom nucleus, and are therefore lower in energy. Treatment of terminal alkynes with a strong base gives the corresponding metal acetylides:

RC≡CH + MX → RC≡CM + HX      (MX = NaNH₂, LiBu, RMgX)

The reactions of alkynes with certain metal cations, e.g. Ag⁺ also gives acetylides. Thus, few drops of diamminesilver(I) hydroxide (Ag(NH₃)₂OH) reacts with terminal alkynes signaled by formation of a white precipitate of the silver acetylide. Acetylide derivatives are synthetically useful nucleophiles that participate in C–C bond forming reactions, as illustrated in the area called "Reppe Chemistry".

In the Favorskii reaction and in alkynation in general, terminal alkynes add to carbonyl compounds to give the hydroxyalkyne. Coupling of terminal alkynes to give dialkynes is effected in the Cadiot–Chodkiewicz coupling, Glaser coupling, and the Eglinton coupling reactions. Terminal alkynes can also be coupled to aryl or vinyl halides as in the Sonogashira coupling.

Terminal alkynes, including acetylene itself, can react with water to give aldehydes. The transformation typically requires special metal catalysts to give this anti-Markovnikov addition result.^[10]

Metal complexes

Alkynes form complexes with transition metals. Such compounds are sometimes useful reagents or illustrate the role that metals play in catalytic transformations of alkynes.

Alkynes in nature and medicine

According to Ferdinand Bohlmann, the first naturally occurring acetylenic compound, dehydromatricaria ester, was isolated from an Artemisia species in 1826. In the nearly two centuries that have followed, well over a thousand naturally occurring acetylenes have been discovered and reported. Polyynes, a subset of this class of natural products, have been isolated from a wide variety of plant species, cultures of higher fungi, bacteria, marine sponges, and corals.^[11] Some acids like tariric acid contains an alkyne group. Diynes and triynes, species with the linkage RC≡C–C≡CR′ and RC≡C–C≡C–C≡CR′ respectively, occur in certain plants (Ichthyothere, Chrysanthemum, Cicuta, Oenanthe and other members of the Asteraceae and Apiaceae families). Some examples are cicutoxin, oenanthotoxin, falcarinol and carotatoxin. These compounds are highly bioactive, e.g. as nematocides.^[12] 1-Phenylhepta-1,3,5-triyne is illustrative of a naturally occurring triyne.

Alkynes occur in some pharmaceuticals, including the contraceptive noretynodrel. A carbon–carbon triple bond is also present in marketed drugs such as the antiretroviral Efavirenz and the antifungal Terbinafine. Molecules called ene-diynes feature a ring containing an alkene ("ene") between two alkyne groups ("diyne"). These compounds, e.g. calicheamicin, are some of the most aggressive antitumor drugs known, so much so that the ene-diyne subunit is sometimes referred to as a "warhead". Ene-diynes undergo rearrangement via the Bergman cyclization, generating highly reactive radical intermediates that attack DNA within the tumor.^[13]

See also

Look up alkyne in Wiktionary, the free dictionary.

Wikiquote has quotations related to: Alkyne

• -yne
• cycloalkyne

References