Tellurium hexafluoride

Tellurium hexafluoride
Identifiers
7783-80-4 YesY
3D model (Jmol) Interactive image
ECHA InfoCard 100.029.115
EC Number 232-027-0
PubChem 24559
Properties
TeF6
Molar mass 241.590 g/mol
Appearance colorless gas
Odor repulsive odor
Density 0.0106 g/cm3 (-10 °C)
4.006 g/cm3 (-191 °C)
Melting point −38.9 °C (−38.0 °F; 234.2 K)[1]
Boiling point −37.6 °C (−35.7 °F; 235.6 K)[1]
decomposes
Vapor pressure >1 atm (20°C)[2]
1.0009
Structure
Orthorhombic, oP28
Pnma, No. 62
octahedral (Oh)
0
Thermochemistry
117.6 J/(mol K)
-1318 kJ/mol
Hazards
Lethal dose or concentration (LD, LC):
5 ppm (rat, 4 hr)
5 ppm (mouse, 1 hr)
5 ppm (rabbit, 4 hr)
5 ppm (guinea pig, 4 hr)[3]
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 0.02 ppm (0.2 mg/m3)[2]
REL (Recommended)
TWA 0.02 ppm (0.2 mg/m3)[2]
IDLH (Immediate danger)
1 ppm[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Tellurium hexafluoride is a chemical compound of tellurium and fluorine with the chemical formula TeF6. It is a colorless, highly toxic gas with an extremely unpleasant smell.

Preparation

Tellurium hexafluoride is most commonly prepared by passing fluorine gas over tellurium at 150 °C. Below this temperature a mixture of lower fluorides form, including tellurium tetrafluoride and ditellurium decafluoride. It can also be prepared by passing fluorine gas over TeO3 or indirectly by reacting TeO2 with SeF4 to produce TeF4 and then heating TeF4 in excess of 200 °C to make TeF6 and Te.

Properties

Tellurium hexafluoride is a highly symmetric octahedral molecule. Its physical properties resemble the sulfur and selenium analogs. It is less volatile, however, due to the increase in molecular weight. At temperatures below −38 °C, tellurium hexafluoride condenses to a volatile white solid.

Reactivity

Unlike the sulfur analog, tellurium hexafluoride is not chemically inert. This can be attributed to the larger atomic radius which can co-ordinate a maximum of eight atoms rather than six for sulfur and selenium which allows for nucleophilic attack. TeF6 is hydrolyzed in water to Te(OH)6 and reacts with Te below 200 °C.

References

  1. 1 2 CRC Handbook of Chemistry and Physics, 90. Auflage, CRC Press, Boca Raton, Florida, 2009, ISBN 978-1-4200-9084-0, Section 4, Physical Constants of Inorganic Compounds, p. 4-95.
  2. 1 2 3 4 "NIOSH Pocket Guide to Chemical Hazards #0588". National Institute for Occupational Safety and Health (NIOSH).
  3. "Tellurium hexafluoride (as Te)". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).

Literature

This article is issued from Wikipedia - version of the 7/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.