Suzuki Stratosphere

Suzuki Stratosphere at the 39th Tokyo Motor Show

Suzuki Stratosphere is a Suzuki concept motorcycle, powered by a 1100cc transverse narrow-bore 24-valve inline-6 engine, rated at 180 HP. According to Suzuki press materials, the engine produced above 100 lb-ft of torque from just above idle all the way to redline. The engine was reported to be three-quarters of an inch narrower than the Hayabusa 4-cylinder engine due to the narrow-bore spacing. The prototype was first unveiled on October 22, 2005, at the 39th Tokyo Motor Show. Its general design is based on and harks back to the original Suzuki ED1/ED2 Katana created by Target Design.

Specifics to the prototype shown in Tokyo:

Production approved

Suzuki confirmed in August 2007 the Suzuki Stratosphere would enter production, although expected release date, initial model year, initial pricing, and specific list of changes from the original prototype shown in Tokyo were not released, aside from the fact that it would retain the six-cylinder narrow-bore engine.[1] Given Suzuki's experience with the B-King, it was likely that the Stratosphere would appear, at least visually, very similar to the prototype, although the aluminum fairings were apt to be replaced by ABS fairings, and many of the specialty electronics (GPS, HUD, etc.) were unlikely to see production.

According to media sources, the Stratosphere was to enter production as a 2009 model.[2]

References

  1. "Suzuki Stratosphere", Bike: page 17, April 2008
  2. Hamamatsu to launch first six, Bike Point Australia, 2007, archived from the original on August 12, 2008

External links

This article is issued from Wikipedia - version of the 7/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.