St Helena Tunnel

St Helena Tunnel

St Helena tunnel on opening day
Overview
Location Ewingsdale, New South Wales, Australia
Coordinates 28°39′10″S 153°32′54″E / 28.6527°S 153.5482°E / -28.6527; 153.5482Coordinates: 28°39′10″S 153°32′54″E / 28.6527°S 153.5482°E / -28.6527; 153.5482
Status Open
Route Pacific Highway
Operation
Work begun 27 September 2012
Constructed Lend Lease
Opened 18 December 2015
Owner Roads & Maritime Services
Traffic Automotive (Cyclists and Pedestrians in side lane)
Character Dual carriageway grade-separated national highway
Technical
Length 434 metres (1,424 ft)
Number of lanes Built for 3 lanes each direction, opened as 2 northbound & 3 southbound lanes
Operating speed 110 kilometres per hour (68 mph)[1]
Tunnel clearance 5.3 metres (17 ft)
Width 13.3 metres (44 ft)
Grade 2.2%

The St Helena Tunnel is a twin-tube road tunnel that forms part of the Pacific Highway near Byron Bay, New South Wales, Australia. The 434-metre-long (1,424 ft) tunnel under St Helena Hill in the locality of Ewingsdale was built as part of the 17-kilometre (11 mi) Tintenbar to Ewingsdale upgrade, which involved a new alignment of the highway.

Features

The tunnel was built to avoid the steep grades of St Helena Hill on the previous alignment of the highway, and the associated heavy truck noise and pollution. At its deepest point the tunnel is 45 metres (148 ft) below the 131-metre-high (430 ft) ridge line. There are two tunnels, with the northbound tunnel accommodating two traffic lanes and the southbound three traffic lanes, due to the gradient of the highway at this point. There is also a bicycle/pedestrian lane in each tunnel.[2]

The cost of the Tintenbar-Ewingsdale upgrade project was $862 million, jointly funded by the New South Wales and Federal governments. It opened on 18 December 2015. The remaining tie in work at each end was completed in March 2016.[3]

The St Helena Road passes over the top of the tunnel and provides local access between the Bangalow Road (B62) that is a link between Bangalow and Byron Bay.[4]

Milestones

See also

References

  1. 1 2 "Pacific Highway Tintenbar to Ewingsdale Upgrade". RTA. Retrieved 3 February 2011.
  2. "Environmental Assessment Submissions Report" (PDF). NSW Roads & bTraffic Authority. Government of New South Wales. May 2009. Retrieved 3 February 2011.
  3. "Planning approval given for Tintenbar-Ewingsdale Pacific Highway upgrade". farnorthcoaster.com.au. 29 January 2010. Retrieved 3 February 2011.
  4. 3776 Pacific Highway, Tyagarah NSW 2481, Australia to Saint Helen Tunnel, Ewingsdale NSW 2481, Australia (Map). Google Maps. 2016. Retrieved 26 November 2016.
  5. "Another stage of Pacific Hwy duplication gets all clear". Australasian Transport News. 9 August 2011. Retrieved 9 August 2011.
  6. Rodney Stevens (2014-01-24). "Tunnel breakthrough a major milestone for highway upgrade". Northern Star. Northern Star Ltd. Retrieved 2014-02-03.
This article is issued from Wikipedia - version of the 11/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.