South African Class 19B 4-8-2

South African Class 19B & 19BR 4-8-2

No. 1412 taking water at Blouwater, c. 2001
Type and origin
♠ Class 19B as built with a round-topped firebox
Class 19BR rebuilt with a Watson Standard boiler
Type MT tender - Type MP1 tender
Power type Steam
Designer South African Railways
(Col F.R. Collins DSO)
Builder Berliner Maschinenbau
Serial number 9827-9840
Model Class 19B
Build date 1930
Total produced 14
Specifications
Configuration 4-8-2 (Mountain)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 28 12 in (724 mm)
Coupled dia. 54 in (1,372 mm)
Trailing dia. 34 in (864 mm)
Tender wheels 34 in (864 mm)
Wheelbase 58 ft 8 34 in (17,901 mm)
  Engine 32 ft 3 in (9,830 mm)
  Leading 6 ft 4 in (1,930 mm)
  Coupled 14 ft 5 in (4,394 mm)
  Tender 20 ft 5 in (6,223 mm)
16 ft 9 in (5,105 mm)
  Tender bogie 6 ft 2 in (1,880 mm)
4 ft 7 in (1,397 mm)
Wheel spacing
(Asymmetrical)
1-2: 4 ft 10 in (1,473 mm)
2-3: 4 ft 9 in (1,448 mm)
3-4: 4 ft 10 in (1,473 mm)
Length:
  Over couplers 67 ft 3 12 in (20,510 mm)
Height ♠ 12 ft 10 in (3,912 mm)
12 ft 10 78 in (3,934 mm)
Frame type Bar
Axle load ♠ 13 LT 16 cwt (14,020 kg)
13 LT 6 cwt (13,510 kg)
  Leading 14 LT 4 cwt (14,430 kg)
  1st coupled 12 LT 15 cwt (12,950 kg)
  2nd coupled 12 LT 16 cwt (13,010 kg)
  3rd coupled 12 LT 19 cwt (13,160 kg)
  4th coupled 12 LT 14 cwt (12,900 kg)
  Trailing ♠ 13 LT 16 cwt (14,020 kg)
13 LT 6 cwt (13,510 kg)
  Tender bogie Bogie 1:
32 LT 18 cwt (33,430 kg)
27 LT 10 cwt (27,940 kg)
Bogie 2:
33 LT 2 cwt (33,630 kg)
23 LT 11 cwt (23,930 kg)
  Tender axle 16 LT 11 cwt (16,820 kg)
13 LT 15 cwt (13,970 kg)
Adhesive weight 51 LT 4 cwt (52,020 kg)
Loco weight 78 LT 14 cwt (79,960 kg)
Tender weight 66 LT (67,060 kg)
51 LT 1 cwt (51,870 kg)
Total weight 144 LT 14 cwt (147,000 kg)
129 LT 15 cwt (131,800 kg)
Tender type MT (2-axle bogies)
MP1 (2-axle bogies)
MP, MP1, MR, MT, MX, MY, MY1 permitted
Fuel type Coal
Fuel capacity 12 LT (12.2 t)
10 LT (10.2 t)
Water cap 6,000 imp gal (27,300 l)
4,250 imp gal (19,300 l)
Firebox type Round-top
  Firegrate area ♠ 37 sq ft (3.4 m2)
36 sq ft (3.3 m2)
Boiler:
  Model Watson Standard no. 1A
  Pitch 8 ft (2,438 mm)
  Diameter 5 ft (1,524 mm)
  Tube plates 20 ft 2 in (6,147 mm)
  Small tubes120: 2 14 in (57 mm)
76: 2 12 in (64 mm)
  Large tubes21: 5 12 in (140 mm)
24: 5 12 in (140 mm)
Boiler pressure 200 psi (1,379 kPa)
Safety valve Pop
Heating surface ♠ 2,176 sq ft (202.2 m2)
1,839 sq ft (170.8 m2)
  Tubes ♠ 2,036 sq ft (189.2 m2)
1,700 sq ft (160 m2)
  Arch tubes ♠ 13 sq ft (1.2 m2)
16 sq ft (1.5 m2)
  Firebox ♠ 127 sq ft (11.8 m2)
123 sq ft (11.4 m2)
Superheater:
  Heating area ♠ 506 sq ft (47.0 m2)
404 sq ft (37.5 m2)
Cylinders Two
Cylinder size 21 in (533 mm) bore
26 in (660 mm) stroke
Valve gear Walschaerts (1401–1413)
Caprotti (1414)
Valve type Piston
Couplers AAR knuckle
Performance figures
Tractive effort 31,850 lbf (141.7 kN) @ 75%
Career
Operators South African Railways
Class Class 19B, 19BR
Number in class 14
Numbers 1401–1414
Nicknames Baby
Delivered 1930
First run 1930
Withdrawn c. 1977

The South African Railways Class 19B 4-8-2 of 1930 is a steam locomotive.

In 1930, the South African Railways placed fourteen Class 19B steam locomotives with a 4-8-2 Mountain type wheel arrangement in service. One of them was later reboilered and reclassified to Class 19BR.[1][2][3]

Manufacturer

Fourteen Class 19B 4-8-2 Mountain type steam locomotives were built in Germany by Berliner Maschinenbau AG (BMAG), the former L. Schwartzkopff, and were delivered in 1930. All but one were built with Walschaerts valve gear.[1][2][3][4][5]

Characteristics

Col F.R. Collins DSO

The South African Class 19B locomotive, numbered in the range from 1401 to 1414, was a later model of the original Class 19, which had been designed in 1928 under the supervision of Colonel F.R. Collins DSO, Chief Mechanical Engineer (CME) of the SAR from 1922 to 1929. It was virtually identical to the Class 19, apart from the wheelbase of the front bogie, which had been increased from 6 feet 2 inches (1,880 millimetres) to 6 feet 4 inches (1,930 millimetres) to improve the clearance between the cylinders and the bogie wheels, since the bogie wheels of predecessors Classes 19 and 19A fouled the cylinder covers on sharp curves. The longer wheelbase bogie also facilitated the removal of cylinder covers at running sheds. Because of this difference, the new engines were designated Class 19B.[1][2]

The first thirteen Class 19B locomotives were delivered with Walschaerts valve gear, but no. 1414 was equipped with Caprotti valve gear as an experiment. After thirteen years, however, the Caprotti valve gear was removed at the Uitenhage workshops and replaced with Walschaerts valve gear in January 1943. The experiment did result in the successor Class 19C being built with Rotary Cam Poppet valve gear.[1][2][3]

The trailing bissel truck was constructed with three holes to enable the compensating beam to be fitted at three locations, which enabled it to be used to redistribute the engine's weight on the trailing axle. The axle load weights as shown for the Class 19B are with the trailing truck compensating beam pin in the rearmost of the three holes. The axle load weights as shown for the Class 19BR are also with the trailing truck compensating beam pin in the rearmost of the three holes.[1][4][5]

As built, the Class 19B was delivered with Type MT tenders with a 12 long tons (12.2 tonnes) coal and a 6,000 imperial gallons (27,300 litres) water capacity, even though the axle load of 16 long tons 11 hundredweight (16,820 kilograms) of these tenders exceeded the permissible limits on the branchlines for which the Class 19B was intended. Upon delivery, their new Type MT tenders were exchanged for the smaller modified Type MP1 tenders from some of the reboilered mainline locomotives. The Type MP1 had a lighter axle load of 13 long tons 15 hundredweight (13,970 kilograms) and was therefore more suitable for branchline work. This policy was followed with all the Classes 19B, 19C and 19D, except the last batch of Class 19D which was delivered with Type MX torpedo tenders.[1][4][5]

Watson Standard boilers

From the 1930s, many serving locomotives were reboilered with a standard boiler type, designed by then CME A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[3][4][5]

When Class 19B no. 1410 was reboilered with a Watson Standard no. 1A boiler, it therefore became the sole member of Class 19BR. It was not equipped with a Watson cab with its distinctive inclined front in the process, but retained its original vertical fronted cab. It did, however, have the tell-tale rectangular regulator cover, just to the rear of the chimney, which identified it as a Watson Standard reboilered locomotive.[2][3][4][5]

Service

South African Railways

Some Class 19B locomotives served around Cape Town and between Kimberley and Vryburg, but most of them spent their working lives on the line between Graaff Reinet and Rosmead across the Lootsberg Pass, until they were eventually replaced by Class 19D locomotives. A couple were also allocated to Sydenham in Port Elizabeth and occasionally worked on the Grahamstown branch. By 1977, they were all withdrawn from service.[3][6]

Industrial

After being retired from SAR service, several were sold into a second career in industrial service.[6]

Illustration

The main picture shows the Transnet National Collection's preserved Class 19B no. 1412 taking water at Blouwater before piloting a Class GMAM Garratt and the Union Express across the Lootsberg Pass, c. 2001. When retired, no. 1412 was initially plinthed at Middelburg in the Cape Province and later restored. During 2016, she re-entered service as Bailey, restored at Voorbaai for the Ceres Rail Company.[6]

References

  1. 1 2 3 4 5 6 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 67–68, 93. ISBN 978-0-7153-5427-8.
  2. 1 2 3 4 5 Espitalier, T.J.; Day, W.A.J. (1946). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, Jul 1946. pp. 542.
  3. 1 2 3 4 5 6 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 8, 10–11, 71. ISBN 0869772112.
  4. 1 2 3 4 5 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 27, 45.
  5. 1 2 3 4 5 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 27, 45.
  6. 1 2 3 Durrant, A E (1989). Twilight of South African Steam (1st ed.). Newton Abbott, London: David & Charles. pp. 97–98. ISBN 0715386387.
Wikimedia Commons has media related to South African Class 19B (4-8-2).
This article is issued from Wikipedia - version of the 6/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.