South African Class 19A 4-8-2

South African Class 19A & 19AR 4-8-2

Class 19A no. 685 at De Aar, 16 October 1978
Type and origin
♠ Class 19A as built with a round-topped firebox
Class 19AR rebuilt with a Watson Standard boiler
Power type Steam
Designer South African Railways
(Col F.R. Collins DSO)
Builder Swiss Locomotive and Machine
Serial number 3300-3335
Model Class 19A
Build date 1929
Total produced 36
Specifications
Configuration 4-8-2 (Mountain)
Driver 2nd coupled axle
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Leading dia. 28 12 in (724 mm)
Coupled dia. 51 in (1,295 mm)
Trailing dia. 33 in (838 mm)
Tender wheels 34 in (864 mm)
Wheelbase 58 ft 7 58 in (17,872 mm)
  Engine 32 ft 2 in (9,804 mm)
  Leading 6 ft 2 in (1,880 mm)
  Coupled 14 ft 5 in (4,394 mm)
  Tender 16 ft 9 in (5,105 mm)
  Tender bogie 4 ft 7 in (1,397 mm)
Wheel spacing
(Asymmetrical)
1-2: 4 ft 10 in (1,473 mm)
2-3: 4 ft 9 in (1,448 mm)
3-4: 4 ft 10 in (1,473 mm)
Length:
  Over couplers 67 ft 6 in (20,574 mm)
Height ♠ 12 ft 10 78 in (3,934 mm)
12 ft 11 78 in (3,959 mm)
Frame type Bar
Axle load ♠ 13 LT 4 cwt (13,410 kg)
13 LT 1 cwt (13,260 kg)
  Leading ♠ 13 LT 12 cwt (13,820 kg)
13 LT 12 cwt (13,820 kg)
  1st coupled ♠ 12 LT 17 cwt (13,060 kg)
12 LT 15 cwt (12,950 kg)
  2nd coupled ♠ 13 LT 4 cwt (13,410 kg)
13 LT 1 cwt (13,260 kg)
  3rd coupled ♠ 12 LT 17 cwt (13,060 kg)
12 LT 15 cwt (12,950 kg)
  4th coupled ♠ 12 LT 15 cwt (12,950 kg)
12 LT 12 cwt (12,800 kg)
  Trailing ♠ 9 LT 18 cwt (10,060 kg)
11 LT 7 cwt (11,530 kg)
  Tender bogie Bogie 1: 25 LT 15 cwt (26,160 kg)
Bogie 2: 25 LT 4 cwt (25,600 kg)
  Tender axle 12 LT 17 cwt 2 qtr (13,080 kg)
Adhesive weight ♠ 51 LT 13 cwt (52,480 kg)
51 LT 3 cwt (51,970 kg)
Loco weight ♠ 75 LT 3 cwt (76,360 kg)
76 LT 2 cwt (77,320 kg)
Tender weight 50 LT 19 cwt (51,770 kg)
Total weight ♠ 126 LT 2 cwt (128,100 kg)
127 LT 1 cwt (129,100 kg)
Tender type MP (2-axle bogies)
MP, MP1, MR, MS, MX, MY, MY1 permitted
Fuel type Coal
Fuel capacity 9 LT 4 cwt (9.3 t)
Water cap 4,250 imp gal (19,300 l)
Firebox type Round-top
  Firegrate area 36 sq ft (3.3 m2)
Boiler:
  Model Watson Standard no. 1A
  Pitch ♠ 8 ft (2,438 mm)
8 ft 1 in (2,464 mm)
  Diameter ♠ 4 ft 10 14 in (1,480 mm)
5 ft (1,524 mm)
  Tube plates ♠ 20 ft 38 in (6,106 mm)
20 ft 2 in (6,147 mm)
  Small tubes86: 2 14 in (57 mm)
76: 2 12 in (64 mm)
  Large tubes18: 5 12 in (140 mm)
24: 5 12 in (140 mm)
Boiler pressure 200 psi (1,379 kPa)
Safety valve Pop
Heating surface ♠ 1,667 sq ft (154.9 m2)
1,839 sq ft (170.8 m2)
  Tubes ♠ 1,527 sq ft (141.9 m2)
1,700 sq ft (160 m2)
  Arch tubes ♠ 15 sq ft (1.4 m2)
16 sq ft (1.5 m2)
  Firebox ♠ 125 sq ft (11.6 m2)
123 sq ft (11.4 m2)
Superheater:
  Heating area ♠ 415 sq ft (38.6 m2)
404 sq ft (37.5 m2)
Cylinders Two
Cylinder size 19 12 in (495 mm) bore
26 in (660 mm) stroke
Valve gear Walschaerts
Valve type Piston
Couplers AAR knuckle
Performance figures
Tractive effort 29,080 lbf (129.4 kN) @ 75%
Career
Operators South African Railways
Class Class 19A, 19AR
Number in class 36
Numbers 675-710
Delivered 1929
First run 1929
Withdrawn c. 1977
The leading coupled axle had flangeless wheels

The South African Railways Class 19A 4-8-2 of 1929 was a steam locomotive.

In 1929, the South African Railways placed 36 Class 19A steam locomotives with a 4-8-2 Mountain type wheel arrangement in service. Five of them were later reboilered and reclassified to Class 19AR.[1][2][3][4]

Manufacturer

The Class 19A 4-8-2 Mountain type steam locomotive was a later modified version of the successful Class 19 which was introduced a year earlier. Thirty-six Class 19A engines were delivered by Swiss Locomotive and Machine Works (SLM) of Winterthur in 1929, numbered in the range from 675 to 710.[2][5][6]

Characteristics

Col F.R. Collins DSO

Like the Class 19, the Class 19A also had Walschaerts valve gear and a bar frame. Col F.R. Collins DSO, Chief Mechanical Engineer (CME) of the South African Railways (SAR) at the time, redesigned the Class 19 to achieve a lighter axle loading, by reducing the coupled wheel diameters from 54 to 51 inches (1,372 to 1,295 millimetres), reducing the cylinder diameter from 21 to 19 12 inches (533 to 495 millimetres) and by using a slightly smaller boiler.[1][2][5]

The reduction in axle load was arranged to suit some of the lighter branchlines and, as part of the weight reduction, the Class 19A was delivered with a new smaller Type MP tender, with a fuel capacity of 9 long tons 4 hundredweight (9.3 tonnes), a water capacity of 4,250 imperial gallons (19,300 litres) and a maximum axle load of 12 long tons 17 hundredweight 2 quarters (13,080 kilograms). The leading coupled wheels had flangeless tyres, but these were later flanged.[2]

While the aim was to reduce the locomotive's total weight for use on some of the more lightly laid branchlines, the actual achieved weight saving was a mere four tons, which could hardly have justified the cost of redesigning.[5]

The trailing bissel truck was constructed with three holes to enable the compensating beam to be fitted at three locations, which enabled it to be used to redistribute the engine's weight on the trailing axle. The axle load weights as listed for the Class 19A are with the trailing truck compensating beam pin in the leading of the three holes. The axle load weights as listed for the Class 19AR are with the trailing truck compensating beam pin in the centre of the three holes.[1][3][4]

Watson Standard boilers

From the 1930s, many serving locomotives were reboilered with a standard boiler type, designed by then CME A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[3][4][6]

Five Class 19A locomotives, numbers 678, 693, 696, 700 and 706, were reboilered with Watson Standard no. 1A boilers and designated Class 19AR. In the reboilering process, at least two of the Class 19AR locomotives, numbers 693 and 696, received domeless boilers from the first batch of Class 19D locomotives, which were delivered new with domeless Watson Standard boilers.[3][4][5][6]

The reboilered Class 19AR locomotives gained less than a ton in weight during the modification process. While most locomotive classes which were reboilered with Watson Standard boilers were simultaneously equipped with Watson cabs with slanted fronts, some of the Class 19AR locomotives retained their original cabs with vertical fronts.[7]

On the reboilered Class 19AR there were, in fact, three versions of cab, since no. 696 had a slanted cab from the running board up and the remains of the squared front cab from the running board down. Apart from the slanted front of the Watson cab, an obvious difference between an original and a Watson Standard reboilered locomotive is usually the cover of the multiple valve regulator which is situated in the smokebox, the rectangular object visible just to the rear of the chimney on the reboilered locomotive.[3][4]

Service

South African Railways

The Class 19A fleet initially served on all systems of the SAR, but were later based mainly at Mason's Mill, Estcourt and Glencoe in Natal, at East London, Queenstown and Burgersdorp in the Eastern Cape, at Cape Town in the Western Cape and a few in the Western Transvaal.[5]

No. 700 was written off after an accident and, by 1977, the rest were all withdrawn from Railways service. Numbers 685, 692 and 693 are known to still survive, no. 685 staged in the open at Queenstown in the Eastern Cape, no. 692 plinthed at Sterkstroom in the Eastern Cape and no. 693 staged at Millsite in Krugersdorp.[5][6][8][9]

The number plate of no. 685, depicted alongside as it is displayed in the Outeniqua Transport Museum in George, is incorrectly inscribed "19AR" since that locomotive was retired without being reboilered with a Watson Standard boiler. The engine was photographed, still with its original boiler, as late as April 1970, fifteen years into electrification and dieselisation of the SAR and with steam traction already largely relegated to shunting and pickup work.

Similarly, the picture of the Class 19A rusting in peace at Queenstown, shown below with the number 693 hand-painted on the cabside, is actually of Class 19A no. 685. It still has an as-delivered boiler while no. 693 was reboilered with a domeless Class 19D boiler. Both locomotives had been set aside by the Transnet Heritage Foundation for preservation, with no. 685 staged at Queenstown and no. 693 at Millsite in Krugersdorp, but each somehow had the other's number painted on their cabsides when their number plates were removed.[8]

Industrial

After being retired from SAR service, several of these locomotives were sold into a second career in industrial service.[5]

Illustration

The main picture shows Class 19A no. 685 at De Aar on 16 October 1978, at the time recently retired and earmarked for preservation. The same locomotive is shown twice more below, still in service at East London and then staged in the open at Queenstown in the Eastern Cape, with sundry parts missing and incorrectly marked as no. 693.

References

  1. 1 2 3 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 62–63. ISBN 978-0-7153-5427-8.
  2. 1 2 3 4 Espitalier, T.J.; Day, W.A.J. (1946). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, Jul 1946. pp. 541-542.
  3. 1 2 3 4 5 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 45.
  4. 1 2 3 4 5 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 21-21a, 26-27, 45.
  5. 1 2 3 4 5 6 7 Durrant, A E (1989). Twilight of South African Steam (1st ed.). Newton Abbott, London: David & Charles. p. 99. ISBN 0715386387.
  6. 1 2 3 4 Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 10–11, 70. ISBN 0869772112.
  7. Dulez, Jean A. (2012). Railways of Southern Africa 150 Years (Commemorating One Hundred and Fifty Years of Railways on the Sub-Continent - Complete Motive Power Classifications and Famous Trains - 1860-2011) (1st ed.). Garden View, Johannesburg, South Africa: Vidrail Productions. pp. 140–141. ISBN 9 780620 512282.
  8. 1 2 Final SAHRA List, p. 18, Category C Locomotives (For Disposal): Class 19A/19AR
  9. Sterkstroom, Municipality - SAR Class 19A No 692
Wikimedia Commons has media related to South African Class 19A (4-8-2).
This article is issued from Wikipedia - version of the 5/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.