Sodium diuranate
 | |
| Identifiers | |
|---|---|
13721-34-1  | |
| ECHA InfoCard | 100.033.882 |
| PubChem | 160982 |
| Properties | |
| Na2U2O7 | |
| Density | 6.44 g/cm3 |
| Melting point | 1,646 °C |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
verify (what is  ?) | |
| Infobox references | |
Sodium diuranate or Yellow uranium oxide, Na2U2O7·6H2O, is a uranium salt also known as the yellow oxide of uranium. Sodium diuranate is commonly referred to by the initials SDU.[1] Along with ammonium diuranate it was a component in early yellowcakes.[2] The ratio of the two species is determined by process conditions; however, yellowcake is now largely a mix of uranium oxides.[3] It was also used in porcelain dentures to give them a fluorescence similar to that of natural teeth and once used in pottery to produce ivory to yellow shades in glazes.[4] It was added to these products as a mix with cerium oxide. The final uranium composition was from 0.008 to 0.1% by weight uranium with an average of about 0.02%. The practice appears to have stopped in the late 1980s.
In the classical procedure for extracting uranium, pitchblende is broken up and mixed with sulfuric and nitric acids.[5] The uranium dissolves to form uranyl sulfate, and sodium hydroxide is added to make the uranium precipitate as sodium diuranate. This older method of extracting uranium from its uraninite ores has been replaced in current practice by such procedures as solvent extraction, ion exchange, and volatility methods.
In the past it was widely used to produce uranium glass or vaseline glass, the sodium salt dissolving easily into the silica matrix during the firing of the initial melt.
The alkaline process of milling uranium ores involves precipitating sodium uranate from the pregnant leaching solution to produce the semi-refined product referred to as yellowcake.
Sodium Uranate may be obtained in the amorphous form by heating together urano-uranic oxide and sodium chlorate; or by heating sodium uranyl acetate or carbonate. The crystalline form is produced by adding the green oxide in small quantities to fused sodium chloride, or by dissolving the amorphous form in fused sodium chloride, and allowing crystallization to take place. It yields reddish-yellow to greenish-yellow prisms or leaflets.
See also
- NRC Glossary
- MQes Uranium Metallurgy
- Sodium Uranate Heats of Formation
- MSDS
- Gasperin, M (1986). "Na2U2O7: Synthèse et structure d'un monocristal". Journal of the Less Common Metals. 119: 83. doi:10.1016/0022-5088(86)90198-0.
References
- ↑ Meredith, A. D.(2013). Modified Sodium Diuranate Process For the Recovery of Uranium From Uranium Hexafluoride Transport Cylinder Wash Solution. (Doctoral dissertation). Retrieved from http://scholarcommons.sc.edu/etd/2466
- ↑ James A. Kent (27 May 2010). Kent and Riegel's Handbook of Industrial Chemistry and Biotechnology. Springer Science & Business Media. pp. 962–. ISBN 978-0-387-27843-8.
- ↑ Hausen, D. M. (1998). "Characterizing and classifying uranium yellow cakes: A background". JOM. 50 (12): 45–47. doi:10.1007/s11837-998-0307-5. ISSN 1047-4838.
- ↑ "Uranium Containing Dentures (ca. 1960s, 1970s)". Retrieved 2016-06-01.
- ↑ "MQes Uranium Inc.". Retrieved 2016-06-01.