Sodium amalgam

Sodium amalgam, commonly denoted Na(Hg), is an alloy of mercury and sodium. The term amalgam is used for alloys, intermetallic compounds, and solutions (both solid solutions and liquid solutions) involving mercury as a major component. Sodium amalgam is often used in reactions as strong reducing agents with better handling properties compared to solid sodium. They are less dangerously reactive toward water and in fact are often used as an aqueous suspension.

Structure and compositions

No particular formula is assigned to "sodium amalgam." Na5Hg8 and Na3Hg are well defined compounds. In sodium amalgams, the Hg-Hg distances are expanded to around 5 Å vs. about 3 Å for mercury itself.[1] Usually amalgams are classified on the weight percent of sodium. Amalgams with 2% Na are solids at room temperature, whereas some more dilute amalgams remain liquid.[2]

Preparation

Metallic sodium dissolves in mercury exothermically, i.e. with the release of heat, therefore, formation of sodium amalgam is famously dangerous for the generating sparks.[3] The process causes localised boiling of the mercury and for this reason the formation is usually conducted in a fume hood and often performed using air-free techniques, such as synthesis under anhydrous liquid paraffin. Sodium amalgam may be prepared in the laboratory by dissolving sodium metal in mercury or the reverse.[4][5][6] Sodium amalgams can be purchased from chemical supply houses.

Uses

Since its introduction in the 1880s by students of Robert Bunsen, Julius Tafel and Hans Goldschmidt, sodium amalgam has also been used in organic chemistry as a powerful reducing agent, which is safer to handle than sodium itself. An example of its use is in the Emde degradation.

A sodium amalgam is used in the design of the high pressure sodium lamp providing sodium to produce the proper color, and mercury to tailor the electrical characteristics of the lamp.

Mercury cell electrolysis

Sodium amalgam is a by-product of chlorine manufactured by mercury cell electrolysis. In this cell, brine (concentrated sodium chloride solution) is electrolysed between a liquid mercury cathode and a titanium or graphite anode. Chlorine is formed at the anode, while sodium formed at the cathode dissolves into the mercury, making sodium amalgam. Normally this sodium amalgam is drawn off and reacted with water in a "decomposer cell" to produce hydrogen gas, concentrated sodium hydroxide solution, and mercury to be recycled through the process. In principle, all the mercury should be completely recycled, but inevitably a small portion goes missing. Because of concerns about this mercury escaping into the environment, the mercury cell process is generally being replaced by plants which use a less toxic cathode.

References

  1. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0-08-037941-9.
  2. Keith R. Buszek "Sodium Amalgam" in Encyclopedia of Reagents for Organic Synthesis, 2001, John Wiley. doi:10.1002/047084289X.rs040
  3. W.4r B. Renfrow Jr and C. R. Hauser (1993). "Sodium triphenylmethyl". Org. Synth.; Coll. Vol., 2, p. 607
  4. 3% Na in Hg: Babcock, S. H.; Lankelma, H. P.; Vopicka, E. (1939). "Sodium Amalgam". Inorg. Synth. Inorganic Syntheses. 1: 10. doi:10.1002/9780470132326.ch4. ISBN 978-0-470-13232-6.
  5. see the Notes in Richard N. McDonald and Charles E. Reineke (1988). "trans-3,5-Cyclohexadiene-1,2-dicarboxylic acid". Org. Synth.; Coll. Vol., 6, p. 461
  6. Procedure for making Na(Hg) by addition of Na to Hg: Tony C. T. Chang, Myron Rosenblum, and Nancy Simms (1993). "Vinylation of Enolates with a Vinyl Cation Equivalent". Org. Synth.; Coll. Vol., 8, p. 479

External links

This article is issued from Wikipedia - version of the 9/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.