Skeg

For other uses, see Skag (disambiguation).
7: Skeg

A skeg, (skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line.[1][2] The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard.[upper-alpha 1][upper-alpha 2] In more recent years, the name has been used for a fin on a surfboard which improves directional stability and to a movable fin on a kayak which adjusts the boat's centre of lateral resistance (it moves the center of resistance relative to the center of effort).[3] The term is also often used for the fin on water skis in the U.S. and for the tail bumpers of aircraft in the US Navy.

Etymology

The word originates in the Scandinavian word for beard; in Old Norse, skegg. In Icelandic the word remains skegg, in modern Norwegian Bokmål and Nynorsk, it appears as skjegg, in Swedish, it is skägg and in Danish, skæg. The Norwegian pronunciation of the letter combination skj is as in the English sh. The word is related to the English shaggy. It also appears in the English place name Skegness - 'beard point', from the way in which a series of tombolos forms, towards the nearby Gibraltar Point. Here, the English pronunciation reflects a probable Danish origin, which pronounces the sk letter combination as an English speaker would expect.

In boats and ships

Where a vessel's rudder is mounted on the centre-line, it is usual to hang it on gudgeons and pintles, the latter being upright pins and the former, rings to fit round them. Together, they form a hinge. This naturally leaves a small gap between the sternpost and the rudder, into which stray items like kelp and rope can catch, causing drag and threatening the security of the vessel's steering. In ships such as Mary Rose, the skeg is a very small feature; a tapered extension of the keel below the leading edge of the rudder. This somewhat beard-like sternward extension of the keel is the basic skeg. Subsequently, the lowest pintle was commonly mounted below the rudder on a metal extension of the keel. This helped further stabilize and protect the rudder and the name skeg was transferred to it. It used to be relatively small until screw propellers were introduced, when it had to reach below the screw and became a proportionately larger feature protecting both screw and rudder from damage.

On wooden vessels, the skeg may be protected from worm damage by the addition of a bug shoe.

In more modern installations, with more than one screw, a fitting supports each propeller shaft just ahead of its screw. This is usually called a shaft bracket but the part of it which extends below the shaft bearing to protect the lower part of the propeller is also a skeg. Similarly, the protective projection of the drive casing, below the rotational axis of the propeller of an outboard motor is another form of the skeg.

Where a yacht is designed with a fin keel, it will normally, also have a skeg-mounted rudder. This link shows the profile of such a boat. This type of skeg is pictured at the bottom of the same linked page.

Surfing

Main article: Surfboard fin

In surfing, windsurfing, and kitesurfing, skegs, usually known as "fins", are attached toward the tail of the board to improve directional stability and control through foot-steering. Fins allow the rider to control the board's direction by varying their side-to-side weight distribution.

Fixed fins were introduced to surfboards by surfing pioneer Tom Blake in 1935.[4] Around 1936, Woody Brown independently added a fixed fin to his second surfboard design, which further popularized the feature. The stability and control it allowed revolutionized the sport.[5]

Small single aluminum fins first evolved into single larger wooden, then fiberglass and carbon versions. In time hydrodynamic improvements took place, pioneered by George Downing who also created the first removable skeg, a teak wood skeg in a teak wood box which was supposed to hold in place due to the swelling of woods in water. In modern surfing board design, the conventional set up is 3 fins, with single fins being a minority. Most windsurfing boards are single fin. However, wave boards now feature some twin fin, tri fin and quad fin designs. Directional kitesurfing boards are usually 3 fin, with 5 fin designs being used for improved upwind performance.

Kayaks

A skeg is employed in the type of kayak used on more open water such as the sea. Its purpose and use are rather different from those of the surfing skeg. In the kayak, the amount of exposure of the skeg to the water, and also its effect on the position of the boat's centre of lateral resistance (CLR), is freely adjustable by the crew. The adjustment varies the degree to which the wind affects the boat - that is, the amount of lateral movement the wind can cause by impacting the upper parts of the boat and the crew.[3][6][7] In more conventional calculations, this would be the centre of effort of the sail area (CE). In still water, where the wind is pushing the boat sideways, a contrary force (lateral resistance) develops, resisting that movement. If the central points of the application of those two forces coincide, the boat moves steadily sideways. Otherwise, it rotates in the horizontal plane, until they are in line. By varying the CLR, it is possible to better control the boat's attitude towards the wind and waves. Irregular flowing movement of the water complicates the issue, however.[3] This link explains the subtleties of the kayak skeg. They may be made of wood, fiberglass or aluminum. Some are deployed using internal cables, but others use external ropes and bungee cord. Typically, these are retractable, and they are not a rudder.[6][7][8][9] If properly configured (e.g., use of street sign aluminum in a narrow box that extends through the hull) they will not flex, and will greatly decrease and counter pitch, Roll and yaw, like a centerboard on a sailboat, when the craft is moving. In that sense, the skeg acts as a lifting foil.

Aircraft

American naval aviators adopted the term "skeg" to describe the tail bumper of an aircraft. These bumpers are needed on airplanes with tricycle landing gear because they might over-rotate on takeoff or landing, which would allow the tail or rear fuselage to strike the runway and be damaged. Skegs are usually covered with heavier-gauge metal than the rest of the fuselage to better absorb impact.

See also

References

Footnotes

  1. "A small fin fitted aft of the keel to protect the rudder and propeller, and improve steering and tracking." MacKenzie, Mike (2005–2012). "Skeg". Sea Talk Nautical Dictionary: The Dictionary of English Nautical Language. Retrieved February 14, 2014.
  2. "Skeg, or Skegg. A projecting stump formerly left on the keel, abaft the stern-post. The after-end of the keel. The composition piece supporting the heel of an equipoise rudder." A naval encyclopædia: comprising a dictionary of nautical words and phrases; biographical notices, and records of naval officers; special articles of naval art and science. PHILADELPHIA: LR HAMERSLY & CO. 1881. Retrieved February 14, 2014. at Internet Archive

Endnotes

  1. MacKenzie, Mike (2005–2012). "Skeg". Sea Talk Nautical Dictionary: The Dictionary of English Nautical Language. Retrieved February 14, 2014.
  2. Smyth, W. H.; Belcher, E. (1867). Skegg. The sailor's word-book: An alphabetical digest of nautical terms, including some more especially military and scientific ... as well as archaisms of early voyagers, etc. London: Blackie and Son. p. 638.
  3. 1 2 3 Watson, Tom (February 12, 2014). "Rudders & Skegs: Maneuvering Aids". paddling.net. Retrieved February 12, 2014.
  4. Motil, Guy (2007). Surfboards. Globe Pequot. p. 30. ISBN 0-7627-4621-1. Retrieved April 8, 2013.
  5. Marcus, Ben (2005). Surfing USA!: An Illustrated History Of The Coolest Sport Of All Time. MVP Books. p. 46. ISBN 1610606868. Retrieved April 10, 2013.
  6. 1 2 "Fixing up your boat: Installing a retractable skeg". Chesapeake Lightcraft. Retrieved February 15, 2014.
  7. 1 2 "How does a kayak skeg work". Atlantic Kayak Tours. 2013. Retrieved February 15, 2014.
  8. "Rudders vs Skegs". Sea Kayaker Magazine. May 28, 2008. Retrieved February 15, 2014.
  9. gnarlydog. "Retrofitting your ruddered kayak with a skegg". gnarlydognews. Retrieved February 15, 2014.

Further reading

Look up skeg in Wiktionary, the free dictionary.
This article is issued from Wikipedia - version of the 10/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.