Sexton (artillery)

The 25pdr SP, tracked, Sexton^[2] was a self-propelled artillery vehicle of World War II. It was based on Canadian-built versions of the American M3 Lee and M4 Sherman tank chassis, which entered production in Canada as the Ram and Grizzly. When Sherman production in the US expanded and supply was no longer a problem, in 1943 it was decided to switch the Canadian production lines to produce the Sexton to give the British Army a mobile artillery gun using their Ordnance QF 25 pounder gun-howitzer, which could fire an 87.6 mm (3.45 in) 11.5 kg (25 lb) HE shell or an armour-piercing shell. It found use in the Canadian and British Army, as well as numerous other British Empire and associated forces. Just after the war, a number of Grizzly and Sextons were sold to Portugal, who used them into the 1980s.

History

In order to better provide artillery support in the highly mobile desert warfare of the North African Campaign, the British Army had quickly adapted a number of obsolete Valentine tanks with the 25-pounder gun. These were introduced in 1942 as the Bishop, but proved to have many problems in service. In particular, the turret left little room for elevation, and gunners took to driving their tanks onto hills or dirt ramps in order to get the full range out of the gun. The Bishop was quickly replaced by the US-built M7 Priest, consisting of the US 105 mm gun mounted on the M3 Lee tank chassis.

A Sexton self-propelled gun of the 147th (Essex Yeomanry) Field Regiment in 1944

However, the Priest used the American 105 mm howitzer rather than the British QF 25 pounder gun-howitzer. Having to supply different ammunition for just a few units complicated supply for the British Army. The US attempted to fit a 25 pounder to the M7 Priest, producing the T51 in mid-1942, but the program suffered delays including the destruction of the gun mount on the prototype during the first live-firing exercises.^[1] US resources were not available for a vehicle solely for British use, so Britain turned to Canada.

The Canadian Army Engineering Design Branch through the Canadian government's Department of Munitions and Supply were asked to build a vehicle similar to the M7 on the Ram tank chassis. The Ram tank was a Canadian tank design that used the chassis of the American Medium Tank M3 as did the Priest. The Ram had been sidelined by a decision to standardize on the Sherman tank for British and Canadian units. A prototype was completed on 23 June 1942. Following trials in Canada, the Canadian government ordered 124 vehicles in three batches. The prototype was shipped to the United Kingdom in early 1943,^[3] where it underwent further trials; the vehicle was found to be highly satisfactory and was given the designation "Sexton" (after the religious custodian) in May 1943. The British government ordered 300 Sextons in the summer of 1943; however, these Sextons were to be built on Grizzly tank hulls (Canadian-built M4A1 Sherman tanks) instead of Ram tank hulls. The Ram-based Sexton was designated as the Sexton Mark I and the Grizzly-based Sexton was designated the Sexton Mark II. British orders for the Sexton II eventually totalled 2,026 vehicles.

Unlike the Ram, which was inferior operationally to the Sherman and never saw combat as a gun tank, the Sexton was successful.^[4] Between 1943 and 1945, the Montreal Locomotive Works manufactured a total of 2,150 Sextons for the use of both Canadian and British forces. The vehicle entered service in September 1943. The vehicles were first used in combat in Italy by the British Eighth Army.^[1] Later Sextons took part in the invasion of France and subsequent Battle of Normandy and the campaign in north-western Europe. During the D-day landings a number of Sextons were ordered to fire from their landing craft as they approached the beaches although the fire did not prove to be very accurate.^[1] In spite of its confused origins, the Sexton was a combination of proven parts and proved to be a successful design which remained in British service until 1956.

Britain and Canada used the Sexton for indirect supporting fire, keeping the Sextons back from the front line and used forward observers to direct overwhelming fire on a target.

Variants

Sexton I

The first 125 vehicles manufactured. Based on the Ram tank hull.

Sexton II

Boxes added to the rear deck to carry batteries and an auxiliary generator to charge them. Based on the Grizzly (M4A1 Sherman) hull.

Sexton GPO (Gun Position Officer)

The 25 pounder was removed and an extra No. 19 Wireless was added along with map tables; this vehicle was used to control battery fire.^[5]

British self-propelled guns with ecclesiastical names

A British self-propelled gun armed with the Ordnance QF 25-pounder in design from 1941 was nicknamed "the Bishop" as its appearance was said to resemble a bishop's mitre. A replacement, the US 105 Millimeter Howitzer Motor Carriage M7 was called "the Priest" by the British, as part of its superstructure was said to resemble a priest's pulpit. Following this line of names a 1942 self-propelled gun armed with the QF 6 pounder was named "the Deacon", and a 1943 carrier weapon with the QF 25-pounder was called "the Sexton"

See also

25pdr Sexton self-propelled artillery vehicle moving during demonstration at Fort Nelson, Hampshire

25pdr Sexton self-propelled artillery vehicle firing during demonstration at Fort Nelson, Hampshire

• Yeramba - an Australian armoured vehicle of the 1950s mounting of 25 pounder on an M3 hull.

References

• Chris Ellis, Peter Chamberlain - AFV No. 13 - Ram and Sexton, Profile Publications, England

External links

Wikimedia Commons has media related to Sexton.

• WWII Vehicles
• Juno Beach Centre