SatNOGS

SatNOGS

Screenshot of SatNOGS Network
Developer(s) Libre Space Foundation
Initial release April 2014 (2014-04)
Development status Active
Type Satellite Ground Station Network
License GNU GPL v3+, AGPL, CERN Open Hardware License
Website satnogs.org

SatNOGS (Satellite Networked Open Ground Station) project is a free software and open source hardware platform aimed to create a satellite ground station network. The scope of the project is to create a full stack of open technologies based on open standards, and the construction of a full ground station as a showcase of the stack.[1]

History

The SatNOGS project initiated during NASA SpaceApps Challenge in 2014 at Athens Hackerspace.[2] The project took part and won the first place of the Hackaday Prize 2014 competition.[3] SatNOGS is currently a project of the Libre Space Foundation.

Overview

SatNOGS aims to provides a stack of technologies needed for a distributed network of low earth orbit satellite ground stations. In order to implement such a stack the four following different sub-projects are developed

SatNOGS version 2 ground station deployed during FOSDEM 2015

Network

SatNOGS Network is a web application for scheduling observations across the network of ground stations.[4] It facilitates the coordination of satellite signal observations, and scheduling such observations among the satellite ground-stations connected on the network.

Database

SatNOGS Database is a crowd-sourced application allowing its users to suggest satellite transmitter information for currently active satellites. Its data are available via an API or via a web application interface allowing other project to use its satellite transmitter information.

Client

SatNOGS Client is the software to run on ground stations, usually on embedded systems, that receives the scheduled observations from the Network, receives the satellite transmission and sends it back to the Network web app.[5]

Ground Station

SatNOGS Ground Station is an open source hardware ground station instrumentation with a rotator,[6] antennas,[7] electronics[8] and connected to the Client. It is based on 3D printed components, readily available materials.

Notes and references

This article is issued from Wikipedia - version of the 2/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.