Saab 900

Saab 900

1993 Saab 900 (TU5M) Turbo 5-door hatchback
Overview
Manufacturer Saab (SAAB-SCANIA)
Production 1978–1998
Body and chassis
Class Compact executive car (D)
Layout FF layout
Chronology
Predecessor Saab 99
Successor Saab 9-3

The Saab 900 is a compact luxury automobile which was produced by Saab from 1978 until 1998 in two generations. The first generation from 1978 to 1993 is known as the "classic"; the generation from 1994 to 1998 is known as the "new generation" (see below).

The "classic" Saab 900 was based on the Saab 99 chassis, though with a longer front end to meet U.S. frontal crash regulations. The 900 was produced in 2- and 4-door sedan, and 3- and 5-door hatchback configurations; in addition, from 1986, a cabriolet (convertible) model was produced. There were single- and twin-Zenith carburettor, fuel-injection, and turbocharged engines, including both Full Pressure Turbo (FPT), and, in European models during the early 1990s, Light Pressure Turbos (LPT).

Overview ("Classic" or First-Generation)

Saab 900

Saab 900 3-door liftback (first generation)
Overview
Manufacturer Saab Automobile
Production 1978–1993 (1994)
Assembly Trollhättan, Sweden
Arlöv, Sweden
Uusikaupunki, Finland (Valmet Automotive)
Designer Björn Envall
Body and chassis
Class Entry-level luxury car/Compact executive car
Body style 2-door convertible
2-door sedan
3-door liftback (hatchback)
4-door sedan
5-door liftback (hatchback)
Layout Longitudinal front-engine, front-wheel drive
Powertrain
Engine
Transmission 4/5-speed manual
3-speed Borg-Warner T-37 automatic
Dimensions
Wheelbase 2,517 mm (99.1 in)
Length 4,685 mm (184.4 in)
4,680 mm (184.3 in) (S & Turbo)
Width 1,690 mm (66.5 in)
1,695 mm (66.7 in) (Turbo SPG Hatch)
Height 1,425 mm (56.1 in)
1,400 mm (55.1 in) (Turbo Convertible & Turbo)
1,405 mm (55.3 in) (Turbo SPG Hatchback)
Chronology
Predecessor Saab 99
Successor Saab 900 (NG)

The Saab 900 is a front-engined, front-wheel-drive compact car with a longitudinally mounted, 45-degree slanted, inline four-cylinder engine, double wishbone front suspension and beam-axle rear suspension. It was originally introduced in May 1978, for the 1979 model year.[1]

Like its predecessor the 99, the 900 contained a number of unusual design features that distinguish it from most other cars. First, the engine was installed "backwards", with power delivered from the crank at the front of the car. Second, the transmission, technically a transaxle, bolted directly to the bottom of the engine to form the oil pan (albeit with separate oil lubrication). Thus, power from the crank would be delivered out of the engine at the front, then transferred down and back to the transmission below, via a set of chain-driven primary gears. In similar fashion, Minis also had their gearbox mounted directly below the engine; however, the Mini gearbox and engine shared the same oil, whereas the Saab 900 (and 99) gearboxes contained a separate sump for engine oil.

Refined over several decades of two-digit Saab models, the 900's double wishbone suspension design provided excellent handling and road feel. The rear suspension comprised a typical beam axle design, stabilized with a Panhard rod. However, the attachment points between the axle and chassis made up an unusual configuration that, in essence, consists of two Watt's linkages at either end of the axle: A lower control arm attaches the axle to the bottom of the vehicle, while an upper link attaches at the top but faces towards the rear, unlike a typical 4-link design with both lower and upper links facing forward.

Saab 900 sedan (US)

Early models did not have sway bars; they began appearing on certain models in 1985, and, in U.S. and possibly other markets, became standard on all trim levels by the late 1980s. The sway bars decreased body roll, but at the expense of some ride comfort and when driven aggressively, increased inside wheelspin. The front and rear bars' diameters were unchanged throughout the model's run.

The 900 utilized a deeply curved front windshield, providing the best driver visibility, calling attention to the marque's aircraft legacy. Also underscoring their aircraft lineage, the 900's dashboard was curved to enable easy reach of all controls and featured gauges lit up from the front. Saab engineers placed all controls and gauges in the dashboard according to their frequency of use and/or importance so that the driver need only divert his gaze from the road for the shortest possible time and by the smallest angle. This is why, for example, the oft-used radio is placed so high in the dashboard. In keeping with the paradigm of its predecessor - the 99 model - the 900 employed a door design unique in automotive manufacturing, entailing an undercutting sweep to meet the undercarriage, engendering a tight, solid unit when the door was closed. This feature also eliminated the stoop in the cabin at the footing of the door, as seen in automobiles of other manufacturers, thereby preventing water and debris from collecting and possibly entering the cabin or initiating corrosion, as well as enabling passengers to enter and exit the cabin without need to step over several inches of ledge.

The 900 underwent minor cosmetic design changes for 1987, including restyled front-end and bumpers that went from a vertical to a more sloped design; sheetmetal body parts were unchanged. Being a small car factory, for economic reasons, Saab kept the basic undercarriage more or less unchanged throughout the 900's production run.

The Saab 900 could be ordered with different options. One highly sought-after option was called the Aero or Sports Package, or, as it was known in the U.S. "Special Performance Group" or, correctly, Sports PackaGe (SPG). The Aero/SPG incorporated (depending on the market and model year) a body skirt; Engineered by Martin Freestone (me) a sport-suspension (1987+) that included shorter, stiffer springs, stiffer shocks, and swaybars; leather seats; premium stereo; and air conditioning. Each of these features could, of course, be ordered independently from Saab's Accessories Catalog for fitment to standard models. Another desirable UK option at this time was the fitment of very distinctive Minilite alloy wheels. Initially these had the words 'Minilite' and 'Saab' cast in raised lettering (later Saabs had a remarkably similar copy but made by Ronal). Power output varied by model year and market but 900S and 900 Turbo models produced after 1985 were fitted with a 16-valve engine, while the basic 900 kept the earlier 8-valve engine.

A 1989 Saab 900 SPG owned by Peter Gilbert of Wisconsin, was driven over a million miles, before being donated to The Wisconsin Automotive Museum. Peter Gilbert claimed a million miles out of the turbocharging unit in addition to the engine itself. Saab gave Mr Gilbert a Saab 9-5 Aero.

History

The typical Saab windshield shape is visible.

The 1979 900 was available in three versions: The GL had the single-carb 99 hp/73.5 kW engine, the GLS had twin carburetors for 106 hp/79.5 kW, the EMS and GLE had fuel injection for 117 PS (86 kW; 115 hp), and the 900 Turbo produced 143 hp/107 kW. The only bodywork originally available was the three or five-door hatchback style, which was seen as more modern at the time.

The Turbo had a different grille from the naturally aspirated models, which received a design with a hexagonal central element. For the 1980 model year, all versions received the sleeker turbo-style grille. The 1980 900 also received larger taillights rather than the earlier 99 units, as well as lower, adjustable headrests up front. 1980 was also the first year for a five-speed gearbox, originally only available in the EMS and the Turbo.[2]

The 900 sedan was introduced in Geneva 1980, as a result of dealer pressure.[1] This introduction corresponded with the phase-out of the old Saab B engine in favor of the lighter Saab H engine. In the early 1980s, most 900s were produced in Trollhättan. However, coinciding with the production of the 9000, more 900's were produced elsewhere. The Valmet plant in Finland, referenced below under the 900C, also produced the non-convertible as evidenced by one previously owned by this author and imported by the SAAB US distributor. The plant in Arlöv (now closed), near Malmö, also produced some 900s.

A big change for 1982 was the introduction of Saab's Automatic Performance Control (APC), a.k.a. boost controller. The APC employed a knock sensor, allowing the engine to use different grades of gasoline without engine damage. Another new feature that year was the introduction of central locking doors (on the GLE and Turbo). Asbestos-free brakes were introduced in 1983, an industry first. A new model also appeared that year in Sweden—the GLi, which used the fuel injected engine.

The year 1984 saw the introduction of the 16-valve DOHC B202 engine in Europe. With a turbocharger and intercooler, it could produce 175 hp/129 kW in the Turbo 16 model (less for catalyst-equipped engines). The Turbo 16 Aero [designated SPG, Special Performance Group in North American Markets] had a body kit allowing the car to reach 210 km/h (130 mph). A different grille and three-spoke steering wheel appeared across all models.

The dual-carb model (and "GL" nomenclature) was gone for 1985. Now, the base 900 had the single-carburetor engine, while the 900i added fuel injection. Two turbocharged models were offered: The 900 Turbo had the 8-valve engine, while the T16S had the 16-valve intercooled unit. The 8-valve turbo had the intercooler the next year, while the 16-valve cars had hydraulic engine mounts. 1986 also marked the introduction of the 900 convertible in North America.

1987 facelift

Facelifted 1987-93 Saab 900 sedan with flush headlights and integrated bumpers (US)

A new grille, headlights, front sidelights and so-called "integrated" bumpers freshened the 900's look for 1987, though the sheet metal was largely unchanged. Several common parts for the 900 and 9000 were introduced for 1988 model year, including brakes and wheel hubs. A water and oil cooled turbocharger (replacing the older oil-cooled unit) was also introduced to improve the unit's durability.

In each of the seasons 1987 and 1988, there was a special 'one-make' race series, in the UK, called the Saab Turbo Mobil Challenge, sponsored by Saab Great Britain and Mobil. It was run by the BARC.

The 8-valve engines were phased out in 1989 and 1990, with the turbo versions having been removed in North American markets by the end of 1984; North American 900S models received the non-turbo 16-valve engine for 1986. A non-turbo 16-valve engine replaced the 8-valve FI unit in the 900i (900S in North America) as well, while the carbureted engines were dropped. Larger pinion bearings were fitted to manual gearboxes for 1989 to improve their strength and reliability. A low pressure turbo engine was available in European markets in 1990 as well. Anti-lock brakes were introduced in 1990, and were standard on Turbo models and - along with a driver's side airbag - were standardized for all North American market cars.

A 2.1 L (2119 cc/129 in³) (B212) engine was introduced in 1991. This engine was available in the United States until the end of the original 900, but in most of Europe, this engine was replaced a year later with the earlier B202 because of tax regulations in some European countries for engines with a displacement of more than 2000 cc.

By 1990, the Saab 900 no longer offered the mesh wheels. There was also a change in the door locks, which carried over to the 900NG.

Front seats from the 9000 were standard from 1991 on and electronically adjustable ones were available as an option.

"Classic" 900 production ended on March 26, 1993, with a new GM2900 platform-based 900 entering production shortly afterwards. The final classic convertibles were still sold as 1994 models, with the Special Edition commanding top dollar in the resale market even today.

In all, 908,817 Saab 900s were built, including 48,888 convertibles.

Convertible

Saab 900 convertible prototype with luggage rack, later available as an accessory.
Saab 900 Turbo convertible (US)

In the mid-1980s, the president of Saab-Scania of America, Robert J. Sinclair, suggested a convertible version to increase sales. The first prototype was built by ASC, American Sunroof Company (now American Specialty Cars). Similarly, Lynx Motors International Ltd produced two "convertible" models, just prior to the official 1986 launch.

The Trollhättan design department, headed by Björn Envall, based its version on the 3-door hatchback while the Finnish plant used the sturdier 2-door version, which also looked better and was therefore selected for production. The initial production was not planned to be large but the orders kept coming in and a classic was born.

The new car was shown for the first time at the Frankfurt Motor Show (IAA) in the autumn of 1983. The first prototype aroused enormous interest and in April 1984, Saab decided to put the car in production at Valmet Automotive in Finland. The production of the first 900 convertible started during the spring of 1986.

The convertible usually had a 16-valve turbocharged engine, some with intercooler, but it was also offered in certain markets with a fuel-injected 2.1 L naturally aspirated engine from 1991 on.

Influenced by General Motors (GM), in 1994 the "New Generation" (NG) 900 SE, based on the Opel Vectra chassis, was introduced. While this design contained styling cues reminiscent of the classic 900, the GM 900 was fundamentally a different car. For many fans of the marque, the GM 900 marked the end of Saab's technology-driven design philosophy and, in their view, the beginning of the dilution of the SAAB brand.

The cabriolet/convertible, however, was made on the 'classic' chassis for an additional year. This model is affectionately known as "The Goose", as, in some markets, the emblem on the back of the SE version reads "Saab 900 SE", which looks a bit like "GOOSE."

In US and Canadian markets, commemorative versions were produced for 1994 featuring special charcoal metallic "Nova Black" paint, a wood dash, black leather piping on the seats and higher-performing engines.

Engine development

1986–1989 2.0L B201 Intercooled turbo H engine

Saab introduced a turbocharger in 1978 in its 99 Turbo with the B engine (based on the Triumph Slant-4 engine designed for Saab by Triumph). This engine was also used in early 900 Turbo models.

For 1981 the B-engine was re-designed as the H engine, which was used through to 1993 (and 1994 cabriolets). Unlike the earlier version, the H-engine is very durable.[3] Saab used Bosch-made mechanical K-Jetronic continuous fuel injection in the fuel injected and 8-valve turbocharged versions, and the Bosch LH 2.2, 2.4 and 2.4.2 and Lucas Automotive electronic fuel injection systems were used in the 16-valve versions. The 2.1 L inline-four 16-valve engine used the Bosch LH 2.4.2 EZK electronic ignition system with knock sensor. 1981 was also the first year that the Turbo was available with an automatic transmission. The four-speed manual option disappeared after this year.[3]

What set the 900 Turbo apart from its turbo-equipped competitors, especially in the early- and mid-1980s, was the development and use of the Automatic Performance Control (APC) boost controller from 1982. The system allowed the engine to run at the limits of engine knocking. The system had a knock sensor attached to the intake side of the motor block and if knocking of any kind was present, the APC-system would decrease the charge pressure by opening a wastegate, a bypass to the exhaust. This enabled the use of various octane fuels and also made the use of the turbocharger safer for the engine. Some 900 Aeros, Carlssons and Commemorative Editions had special APC controllers in red and black enclosures (so-called "redbox" APCs) that provided more boost and increased power to 175 hp (130 kW) or 185 hp (138 kW) without a catalytic converter.

At first, Saab used a Garrett turbocharger (T3), which was oil-cooled. From 1988 through 1990, water-cooled T3s were fitted. In 1990, Saab fitted Mitsubishi TE-05 turbochargers in the SPG models only for the USA; for other countries, and for the USA from 1991, all 900 Turbos were fitted with the TE-05. Also water-cooled, the TE-05 was slightly smaller than the Garrett T3s, providing improved throttle response and quicker spool-up. The TE-05 is unique in that its exhaust inlet flange utilizes a Garrett T3 pattern.

1984–1993 2.0 L B202 T16

Engines

Performance

Special models

900 GLi Gold

The Gold special edition was available in the UK in 1981 as the first 900 4-door saloons, these had Turbo Spec Velour Interior finished in either Blue or Black with Gold pin stripes, twin air vent bonnet and fuel gauge showing tank contents in Litres.

900 Tjugofem

The tjugofem (= 25 in Swedish) Saloon was released in a batch of 300 to celebrate SAABs 25th year in the UK. These had the 1985cc 8-Valve engine with Bosch K-Jetronic fuel injection. Interior trim was blue turbo velour with a special gear knob with the cars number. Exterior the model was a standard non-turbo apart from alloy wheels, Tjugofem pinstriping and Turbo style rear spoiler.

900C

900C was built in Uusikaupunki, Finland and in Arlöv, Sweden just outside Malmö, was a late 1980s carburetted model. It used an eight-valve B201 engine with a single carburetor producing 100 bhp (75 kW; 101 PS) and included power steering as standard equipment.

Prototype 900 SPG in Mother of Pearl White. Vehicle shown with US-spec headlamps as originally equipped by Saab for media test drives and reviews.

900 Aero or 900 SPG

In 1984, Saab introduced a high performance model known in Europe as the Aero. In North America, the model designation became SPG (Sports PackaGe - per SAAB's own literature) due to a model and trademark conflict with GM. The Aero/SPG was the first Saab to be delivered with the 160 bhp (119 kW; 162 PS) 16-valve turbo motor. The concept Aero/SPG vehicles were met with huge acceptance by the motoring community.

These prototypes were painted a mother of pearl white and had red leather interiors with matching Colorado Red dashboards. Unfortunately, in testing, the pearlescent white was found to be too difficult to repair in terms of color, and as such, this color was never offered to the public for sale. Only 29 of these prototype Aero/SPGs were manufactured and are considered quite rare by collector standards. The factory retained, and subsequently crushed, 22 of the white prototypes. The remaining seven vehicles were employed as press vehicles for the series launch. Four of the prototypes were sent to the United States. One was wrecked in 1993. The other three are owned by collectors in California, New York and Rhode Island. The three European SPG vehicles are also collector owned, one of which receiving a comprehensive restoration between 2007-2010. Hällberga bildemontering Sweden junked one in 1999 (Owners own remark).

In 1984, the first year of consumer production, the Aero/SPG was delivered in black and in silver (in markets other than USA). In Australia the 1985 silver models had a dark red interior, including full red leather. In the US the black cars were featured with tan leather interiors. In Canada and in the rest of the world, the cars were black with red leather interiors. In the US market the SPG was offered in; Black in 1985, Grey in 1986 - 1987, Grey, Black(400) and Silver(1) in 1988, Grey and Black in 1989, Red and Black in 1990 and Red(40), Black(105) and Beryl Green(109) in 1991. Production of the SPG was extremely limited and paint color availability varied by year. The final year of production was 1991 in the USA. In total, over the course of six years, 7,625 SPGs were built and imported to North America. In the rest of the world, Aeros were equally rare—especially those loaded with leather interiors, A/C and other luxuries considered standard by upscale North American consumers. The SPG is fondly regarded by car collectors and Saab enthusiasts.

900EP (900S)

The EP was a special Ecopower model for the Italian market. It uses a 16 valve low pressure turbo (LPT) engine and has a pre-heated catalytic converter. It was sold outside Italy with a 900S badge.

900 CD

1985 SAAB 900CD

In 1977 Valmet had created an elongated executive model of the 99 combi-coupé named "Finlandia". With the introduction of the 900, the concept was transferred onto the new chassis. The "Finlandia" was 20 cm (7.9 in) longer than standard, by adding 10 cm (3.9 in) to both front and rear doors, but only the rear leg room was larger. The idea behind the car was to produce an executive car which would appeal to the Nordic market as an option to big German and American sedans. The first cars were sold as the Saab 900 "Finlandia". These cars made between 1979 and 1982 were combi-coupés, and didn't have the 'CD' designation. Very few examples of these early models were exported. After the more representable 4-door sedan was introduced, the CD designation replaced the nickname and the Swedish Saab headquarters started to officially offer the car for export. The 900 CD was made at the Valmet factory in Uusikaupunki, Finland. At least in the domestic market the cars were essentially built to the buyers wishes. The list of optional extras for the CD included a leather interior, reading lights, rear blinds, footrests, and even an in-car telephone. However, due to the cars special nature and demanding customer base, the trim and technical specifications of some examples can be unique. The Uusikaupunki factory clearly had high aspirations for the car. Valmet even developed a prototype of an even longer, seven seat limousine as a concept car of an official state car. 579 cars were built between 1979 and 1986.

900 Springtime in Sweden [SIS]

In 1988, Saab commissioned 288 special convertibles, one for each of its United States dealers, as part of the 1988 Dealer Meeting in Sweden. Dubbed the Springtime in Sweden, or "SiS" model these cars are differentiated by their Aero/SPG-like bodywork and 3-spoke wheels. Each car was painted black, with buffalo grey leather interiors and black convertible roofs. Each car was marked with a special "Springtime in Sweden" emblem that was attached to the lower left of the glovebox door. The emblems were all identical and are not serialized. All were Turbo models. Of the 288 built, four were automatics and the remaining 284 had 5-speed manual transmissions. Emblems on the exterior body were deleted in the scheme of the SPG, with only the word SAAB and the Saab-Scania roundel on the trunk appearing on the car. The car was fitted with the standard Saab grille for the period, but did not feature the miniature "turbo emblem." The SPG suspension was not fitted, and aside from the SPG body fairings and dash emblem, the SIS is identical to a standard 1988 900 Turbo Convertible in the black/grey color combination. The cars were sold, one to each dealer, however some dealers used the opportunity to trade their SiS convertible with other dealers in an effort to get other car models (specifically the 9000CD) for sale. Contrary to popular belief, the SIS was not given to the dealers for free. Dealers paid for their own car, the invoice price even reflected the increased cost of the SPG bodywork. Each dealer did however receive an Orrefors crystal vase, engraved with the Saab-Scania logo, packed in the trunk when the SIS was delivered stateside as a surprise gift. Please note: Some individuals in an attempt to portray provenance of their vehicles, point to a sticker behind the driver side door card, that reads, in part, "AERO" and "CABRIO". This sticker was at one time affixed to ALL c900 convertibles and does not designate the vehicle as being of the SIS series. The only true/false indicator of an SIS is the inclusion of the glovebox badge and/or the original window sticker.

900 Enduro

The Enduro was a special version of the 1980 900 Turbo assembled by Saab Australia; only eleven 900 Enduros were made along with a full body kit as a spare.[7]

The package consisted of large fibreglass wheel arches to accommodate the extra track width front and rear, front air dam and rear fiberglass spoiler fully 2 inches (51 mm) wider than normal. Extra gauges (oil pressure [0 to 500kPa - 0 to 75 psi], battery voltage [10 to 16 volts] and ammeter [-50 to +50 A]) were mounted where the radio usually was. The radio was moved to a new lower centre console that was not fitted to the 1980 model as standard.

The cars were fitted with either gold or black-centred (depending on body colour) Simmons 'P-4' 3-piece composite alloy 7.5x15" wheels. The overall outside edge-to-edge distance is 4-inch (100 mm) wider at the front and 9 inches (230 mm) at the rear over a 900 Turbo of the day - mainly to decrease the roll centre height and improve turn-in response. Tyres were 225/50VR15 Pirelli Cinturato both front and rear.

Suspension was improved with 290 mm (free length) by 17 mm 368 lb 7.1 turn springs up front and 300 mm (free length) by 16 mm 484 lb 9 turn springs at the rear. Steering caster was set to +2.25 deg +/- .25 deg, camber to -1.75 deg +/- .25 deg and toe in was 2.5 mm +/- 0.5 mm.

To increase performance, the wastegate was set at 17 psi (1.2 bar), which delivered a claimed 175 hp (130 kW) from its 8-valve B201 slant-4 engine. Upstream water injection came standard.

Paint was a 2-pack Dulux Acran enamel and came in at least four known colours: "Aquamarine Blue Metallic" and a very light green (almost white) referred to as "Marble White". There was at least one Enduro painted in "Solar Red" and a fourth in "Acacia Green Metallic". The hood, side window frames and rear deck were painted in Dulux GT Satin Black. Large "ENDURO" stripes were emblazoned on the hood, the rear deck and along both sides at sill level, although not all vehicles were treated to the "Enduro" hood graphics.

900 Lux

900 'Lux' with Toppola

The Lux was a special model available 1983 and 1984. It came in a two-tone paint, usually Slate Blue metallic on top and silver below.

900 SE

The SE model was produced in May 1990 and came with 5-doors Irridium Blue with blue-pin stripes down the sides. The car also featured multi-spoke alloys, full electrics, grey leather seats and wood effect as standard. Only 300 were originally made for the UK market, with a choice of either a 2.0L N/A engine or 2.0L lpt version.[8] Later more SE versions were made; e.g. the 3 door LPT 900 SE Aero (1993). However these were not part of the original limited run.

900 Carlsson

The Carlsson was a special edition 900 produced in honour of Erik Carlsson, of which only 600 examples were sold in the three years it was in production (1990 to 1992) and only available in the UK. It is thought by most that there were only 200 examples sold but in fact there were 200 examples sold for each of those three years. So it would be more probable that there are 200 examples of each of the three colours, which were, Black, White and Red. All 900 Carlssons were 3-door hatchbacks, had a body coloured AirFlow body kit, were fitted with twin chrome exhausts, and were powered by the 1985 cc turbocharged engine with an upgraded (Red) APC giving 185 bhp (138 kW; 188 PS) . The 900 Carlsson was also equipped with the "Type 8" primary gear set.

1993 & 1994 Commemorative Edition

314 Commemorative Edition 900 Turbo 3-door Hatchback Coupés were made for the U.S. market in 1993. All the cars were painted solid black with a tan leather interior and had 5-speed manual transmissions. The horsepower was increased to 185 hp by outfitting the cars with the "red box" APC controller, a 2.8-bar fuel pressure regulator (base turbo was 2.5 bar), and a distributor with enhanced vacuum advance. The cars rode on the SPG suspension. The interior was further embellished by a walnut dash facia and a leather gear knob and gaiter. The wheels were 15" "directionals" painted medium-gray metallic with a polished lip. Each Commemorative Edition was shipped with a small brass plaque indicating its number in the series. The plaques were serialized to indicate "its number" out of 325. However, only 314 were actually built. In addition, 15 identically equipped cars were shipped to Canada and were equipped with metric (kilometer) speedometer instruments.

500 Commemorative Edition 900T convertibles were delivered to the U.S. market in 1994. They were the last 500 classic 900 convertibles to be built. They had the same performance modifications as the 1993 Commemorative Edition vehicles with the exception of the lower SPG suspension. They all had the 5-speed manual transmission, and came with the same uniquely styled wheels, walnut dash facia, and leather gear knob and gaiter. The tan leather interior was further enhanced with black piping, which was exclusive to this model. The cars were all painted Nova Black Metallic (another feature exclusive to the 1994 Commemorative Edition) and had tan canvas tops. 500 identically equipped cars were shipped to Canada but have metric instruments. The 1994 CE vehicles did not have a plaque designating or celebrating the series. The VIN numbers do however run sequentially, the only Saab special edition series to do so.

Saab 900 Ruby

900 Ruby

Only available in the UK, the Ruby had the 185 bhp (138 kW; 188 PS) 'Carlsson' engine but no body kit. All were in 'Ruby' Red and can be distinguished from other 900s by the colour-coded bumpers and grey (rather than silver) alloy wheels. They also had the unique air-conditioned interior of buffalo leather with Zegna pure wool inserts in the seats and door panels. There were 150 examples and were the last classic style 900s sold in the UK.

Swedish Special Edition

15 rarer LHD "Ruby" versions were also produced. 8 were made available to the Swedish market, known as the "Swedish Special Edition"[9] and the rest were scattered in Europe. They were identical to the UK spec but had a more refined lower dash or knee guard and electric front seats.

Conversions

Dealer models

Some SAAB dealers made special models. SAAB Wimbledon made the Sprint and the Sport. The Sprint had a special body kit, lower, stiffer springs, and Pirelli Cinturato P7 on 7"x16" wheels. It also came with an intercooler, full colour-coding and 3-spoke leather steering wheel. The Sport had alloy wheels, full colour-coding and spoilers, uprated suspension, 3-spoke leather steering wheel, Clarion stereo and an electric aerial. Heuschmid GmbH offered options such as tuning, intercooler, suspensions tweaking and custom alloy wheels. EIA Motors of France made a series of 100 normally aspired 16 valve tuned to 158 bhp (118 kW; 160 PS) . Lynx Motors in the UK made a short run conversion of the two-door 900 shell to a convertible. The Winchester edition was a 4-door slate blue sedan and blue velour interior and wood trims. Saab A.I.M the Netherlands made 2 special models. The Red Arrow: a red 900 Turbo 8v with a grey aero kit and a whaletail spoiler. 150 where made, 100 with whaletail and 50 without. And the Silver Arrow: a metallic silver 900 Turbo 8v sedan with special striping, wooden steering wheel and gearknob. 200 Silver Arrows where made. Both Arrows have a special plate on the dashboard with a unique number 1-150 an 1-200.

Specifications

Notes on specifications

The tire supplier varies by market and model year. In 1982, the US market was supplied with Pirelli Cinturato P6 (not to be confused with the current Pirelli P6 4 Season) 195/60HR15 tires for the 900 turbo and Pirelli P8 185/65SR15 for the 900 (called the 900GLi in some markets) and 900S (called the 900EMS in some markets). Aero and SPG models, as well as vehicles that were delivered from the factory equipped with red-box APC systems were shod with 195/60VR-15 tires. In 1990, the US market 900 (called the 900i in some other markets) was supplied with Pirelli P8. In 1992, there were several tire suppliers and at least one US market brochure stated that the US distributor cannot allocate cars by tire manufacturer.

Saab 900 NG (1994-1998)

Saab 900 NG
Overview
Manufacturer Saab Automobile
Production 1994–1998
Assembly Trollhättan, Sweden
Uusikaupunki, Finland (Convertible) (Valmet Automotive)
Designer Björn Envall, Aina Nilsson Ström (interior),[10] Einar Hareide[11] (1991)
Body and chassis
Class Entry-level luxury car / Compact executive car
Body style 2-door convertible
3-door hatchback
5-door hatchback
Layout Transverse front-engine, front-wheel drive
Platform GM2900 platform
Related Opel Calibra
Opel Vectra
Vauxhall Cavalier
Saab 9-5
Saturn L-Series
Powertrain
Engine 2.0 L B204 I4
2.3 L B234 I4
2.5 L B258I V6
Transmission 5-speed F25 manual
5-speed "Sensonic" manual
4-speed automatic
Dimensions
Wheelbase 102.4 in (2,601 mm)
Length 182.6 in (4,638 mm)
Width 67.4 in (1,712 mm)
Height 56.5 in (1,435 mm)
1997-98 Hatchback: 56.6 in (1,438 mm)
Chronology
Successor Saab 9-3

The second or 'new' generation Saab 900 (also referred to as the GM900 or NG900 among enthusiasts) was built on GM's GM2900 platform as a replacement for the "classic" first-generation Saab 900. This all-new 900 was produced in the 1994 through 1998 model years. In Mid 1998 it received over 1100 individual improvements (although some were actually introduced on the 1998 model 900), and was renamed the Saab 9-3 (in most markets; in the US the name change was introduced for 1999). As the 9-3, the NG900 was produced through 2002.

Variants

Saab 900 S 5-door (US)
Saab 900 S five-door (Australia)
Saab 900 S convertible (Australia)

Variants included 900i (4-cylinder, non-turbo), S (4-cylinder, non-turbo) and SE (4-cylinder turbo or V6) models in three-door, five-door and convertible body styles. For 1997 and 1998 only, there was also a Saab 900 Talladega, after a record-breaking endurance test in 1996, on the Talladega Superspeedway.

Depending on market, the NG900 was available with a choice of 2.0 L or 2.3 L Saab 16-valve DOHC engines (Saab engine codes B204, B234) in naturally aspirated or turbocharged form (2.0 L only), as well as a 2.5 L version of GM's European 54° V6 engine. Engine management for the turbos was by Saab Trionic 5 with Direct Ignition (SDI) and Automatic Performance Control, and for non-turbos by Bosch Motronic fuel injection. A distributor-operated ignition system was provided for naturally aspirated engines in some markets.

In contrast to the 'classic' Saab 900 with its longitudinally mounted engine and front-hinged hood (bonnet), the NG900 had a more-common transversely mounted engine with rear-hinged hood (bonnet).

Sensonic

The 'Sensonic' clutch variant, (available on Turbo models only) provided a manual gear lever as in a standard manual transmission car, but omitted the clutch pedal in favor of electronics which could control the clutch faster than an average driver.

When a driver started to move the gear shift knob/gear selector lever, a computer-controlled actuator operated the clutch. With the car in gear but stationary, the clutch was released only when throttle was applied. If neither brake nor gas pedal was depressed, a warning tone sounded and a message flashed on the on-board display, and if no action was taken after 7 seconds, the engine was shut off.

A "Hill Start" function for Sensonic-equipped cars (as described in the owner's manual) was intended to assist in getting underway on hills, by engaging the car's clutch to prevent rolling backward. However, this feature was not actually implemented on the car.

Sensonic was discontinued after a short time, as it proved unpopular.

Saab Information Display

The NG900 introduced the Saab Information Display, or SID (available on S or SE models only), which gave the driver real-time information while driving, such as fuel efficiency and outside temperature. Base specification cars had a digital clock in place of the SID and a non-digital instrument panel with a mechanical odometer (as opposed to the digital odometer on higher spec models). Interestingly the SID also controls other vehicle components, including but not limited to audible warnings for turn signals and the vehicles horn.

NG engines

Night Panel

Panel illuminated
Night Panel

One Saab innovation, inspired by the company's roots in aeronautics, was the 'Black Panel' feature (available on S or SE models only), which extinguished most instrument panel lights at the touch of a button on the SID, to eliminate distraction from dash lights during night driving. While active, this feature permitted darkened instruments to re-illuminate themselves when they required driver attention - if say, the engine speed increased alarmingly or if the fuel level should drop below 15 litres (4 US gal).[12] This feature was later renamed 'Night Panel' in Saab 9-3 and Saab 9-5 models. In the later Night Panel version, the speedometer is only illuminated up to the 87 mph/140 km/h mark. The remainder of the scale will only be illuminated if the speed of the car exceeds 84 mph/135 km/h.[12]

900i

Under the leadership of General Motors, Saab was re-branded as a luxury maker. This meant that the NG900 would be positioned, and priced, above the Opel Vectra, with which it shared its chassis platform. It would also make the bottom-of-the-range 900i more expensive than the Vectra. This led to cost-reduction measures for the 900i. The 900i would lose its rear-window wiper, the exclusive Saab Information Display, and would utilize a different instrument layout with a mechanical odometer instead of a digital one. The NG900i would also lose its rear spoiler.

The 900i was only available in Europe, Australia, New Zealand and Japan as a three-door or a five-door with a choice of a 2.0 or 2.1 L engine. It did not sell very well in the UK and Australia, where the S and SE models were popular with Saab drivers. It was, however, popular as a cheaper alternative to the S and SE models.

Saab 900i 3-door (front)
Saab 900i 3-door (rear)

Awards and achievements

1998

1996

1995

1993 and 1994

Sale of intellectual rights to BAIC

In January 2010 General Motors confirmed it was selling the intellectual property rights of the 900 along with the pre-2010 Saab 9-5 and pre-2002 Saab 9-3 to the Beijing Automotive Group (BAIC) for US$197mn for 3 vehicle platforms, two transmission systems, and two engine systems.[13]

References

  1. 1 2 Büschi, Hans-Ulrich, ed. (March 10, 1983). "Automobil Revue '83" (in German and French). 78. Berne, Switzerland: Hallwag, AG: 489. ISBN 3-444-06065-3.
  2. ↑ Johansson, George, ed. (1979-08-17). "Saab 1980: Femväxlad turbo, sämre garanti" [Five-speed turbo, worse warranties]. Teknikens Värld (in Swedish). Stockholm, Sweden: Specialtidningsförlaget AB. 31 (17): 14–15.
  3. 1 2 Kjellström, PeO (1987-03-04). "Saab Turbo: En räddande ängel!" [Saab Turbo: A rescuing angel!]. Teknikens Värld (in Swedish). Stockholm, Sweden: Specialtidningsförlaget AB. 39 (6): 105.
  4. ↑ Auto, motor und sport nr 5-1985.
  5. ↑ Auto, motor und sport nr 7-1984.
  6. ↑ Auto, motor und sport nr 23-1984.
  7. ↑ "Steroid Poppin' Swede". AutoSpeed. Retrieved 2009-05-07.
  8. ↑ "Saab 99 and 900: The complete story"
  9. ↑ c900se.pjgh.co.uk
  10. ↑ Box 131. "HKD". Hdk.gu.se. Retrieved 2010-09-30.
  11. ↑ "Saab Designer Profile – Einar Hareide". Saab History. Retrieved 2012-03-13.
  12. 1 2 Owner's Manual Saab 9-3 M2000 (PDF), Trollhättan, Sweden: Saab Automobile AB, 1999, p. 69, retrieved 2012-05-03
  13. ↑ "UPDATE 3-BAIC in overdrive to develop brand with Saab tech". Reuters. December 23, 2009. Retrieved 2010-02-17.

"Saab 900 model year changes". SaabMuseum.com. Retrieved July 10, 2005. 

Further reading

Wikimedia Commons has media related to Saab 900.
Saab, road car timeline, 1950–1979 — next »
Type 1950s 1960s 1970s
0123456789 0123456789 0123456789
Compact car 92 93 95/96
99
Entry-level luxury car 900
Grand tourer GT Sport
Sports car 94 97/Sonett
« previous — Saab Automobile, road car timeline, 1980s–2014
Type 1980s 1990s 2000s 2010s
0123456789 0123456789 0123456789 012345
Small family car 600
99 90 9-2X
Compact executive car 900 900 9-3 9-3 9-3
Convertible 900 900 9-3 9-3
Executive car 9000 9-5 9-5
Crossover 9-3X
9-4X
SUV 9-7X
This article is issued from Wikipedia - version of the 10/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.