Rotax Max

The Rotax Max 125 Engine is a two-stroke 125 cc (7.6 cu in) engine designed by Rotax, part of Bombardier Recreational Products (BRP), to provide cost-effective but high speed kart racing. Built in Austria, the engine is liquid cooled, equipped with a balance shaft, integrated water pump, electric starter and centrifugal clutch. Its combination of onboard electric starter and centrifugal clutch simplifies its operation. This concept is called TaG (Touch-and-go).

The Rotax Max was introduced to karting in 1998, easy to use and very reliable, it almost immediately began to gain market share from other slower or more expensive classes. The engine is offered in different performance configurations.

Engine versions

There are several different versions of the engine. The original has a power valve and produces around 28.5 hp (21.3 kW), and is used by racers aged 15 or older. The DD2 is another fully powered version which has two gears and is direct drive in that the axle goes through the engine without need for a chain.

125 MAX "base" configuration:

125 Junior MAX configuration:

125 Mini MAX engine configuration:

125 Micro MAX engine configuration:

Based on an evolution concept, each of the above configurations can be upgraded or downgraded to any of the other configurations by replacing various accessories and components.[1]

125 MAX DD2 engine configuration:

Rotax Max Challenge

BRP-Powertrain has introduced a single (engine) brand race series for the MAX engine concept - called Rotax Max Challenge . This race series is organized in various classes (125 Micro MAX, 125 Mini MAX, 125 Junior MAX, 125 MAX and 125 MAX DD2) in around 60 countries. Competitors from the national Rotax Max Challenges in the 125 Junior MAX, 125 MAX and 125 MAX DD2 class can qualify to participate at the annual Grand Finals of the Rotax Max Challenge, where most of the costs are covered by BRP-Powertrain.

To assure the equal performance of the engines, BRP-Powertrain has established a very strict technical regulation and a sealing system for the engines. Only official service centers are authorized to check engines for their conformity and to seal them.

References

  1. Evolution concept - BRP Rotax Archived September 18, 2009, at the Wayback Machine.
This article is issued from Wikipedia - version of the 11/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.