Reinforced carbon–carbon

Pieces of reinforced carbon–carbon including a panel removed from the wing of Space Shuttle Atlantis,[1] showing brittle failure of C/C due to foam impact reproducing a possible event during Columbia's final launch.

Carbon fibre-reinforced carbon (aka Carbon–Carbon, abbreviated C/C or Reinforced Carbon-Carbon, abbreviated RCC or Carbon-Fiber-Reinforced Carbon, abbreviated CFRC) is a composite material consisting of carbon fiber reinforcement in a matrix of graphite. It was developed for the nose cones of intercontinental ballistic missiles, and is most widely known as the material for the nose cone and wing leading edges of the Space Shuttle orbiter. It has been used in the brake systems of Formula One racing cars since 1976; carbon–carbon brake discs and pads are a standard component of Formula One brake systems.

Carbon–carbon is well-suited to structural applications at high temperatures, or where thermal shock resistance and/or a low coefficient of thermal expansion is needed. While it is less brittle than many other ceramics, it lacks impact resistance; Space Shuttle Columbia was destroyed during atmospheric re-entry after one of its RCC panels was broken by the impact of a piece of foam insulation from the Space Shuttle External Tank. This catastrophic failure was due in part to original shuttle design requirements which did not consider the likelihood of such violent impacts.

Production

The brake disc of this Ferrari race car's braking system is made from carbon fibre-reinforced silicon carbide

The material is made in three stages:

First, material is laid up in its intended final shape, with carbon filament and/or cloth surrounded by an organic binder such as plastic or pitch. Often, coke or some other fine carbon aggregate is added to the binder mixture.

Second, the lay-up is heated, so that pyrolysis transforms the binder to relatively pure carbon. The binder loses volume in the process, so that voids form; the addition of aggregate reduces this problem, but does not eliminate it.

Third, the voids are gradually filled by forcing a carbon-forming gas such as acetylene through the material at a high temperature, over the course of several days. This long heat treatment process also allows the carbon to form into larger graphite crystals, and is the major reason for the material's high cost. The grey "Reinforced Carbon–Carbon (RCC)" panels on the space shuttle's wing leading edges and nose cone cost NASA $100,000/sq ft to produce, although much of this cost was a result of the advanced geometry and research costs associated with the panels.

C/C is a generally hard material that can be made highly resistant to thermal expansion, temperature gradients, and thermal cycling, depending on how the fibre scaffold is laid up and the quality/density of the matrix filler.

Mechanical properties

The strength of carbon–carbon with unidirectional reinforcement fibres is up to 700 MPa. Carbon–carbon materials retain their properties above 2000 °C. This temperature may be exceeded with the help of protective coatings to prevent oxidation.[2] The material has a density between 1.6–1.98 g/cm3.[3]

Similar products

The Dunlop carbon brakes as used on the Concorde airiner.

Carbon fibre-reinforced silicon carbide (C/SiC) is a development of pure carbon–carbon, and can be used in automotive applications, such as components of brake systems on high performance road cars, namely the brake disc and brake pads. C/SiC utilises silicon carbide with carbon fibre, and this compound is thought to be more durable than pure carbon-carbon, however heavier hence not used in F1.

Applications initially included the Mercedes-Benz C215 Coupe F1 edition,[4] and are standard fitment on the Bugatti Veyron and certain current Bentleys, Ferraris, Porsches, Corvette ZR1, ZO6 and Lamborghinis. They are also offered as an "optional upgrade" on certain high performance Audi cars, including the D3 S8, B7 RS4, C6 S6 and RS6, and the R8.

Carbon brakes became widely available for commercial airplanes in the 1980s[5] having been first used on the Concorde supersonic transport.

A related non-ceramic carbon composite with uses in high tech racing automotives is the carbotanium carbon–titanium composite used in the Zonda R and Huayra supercars made by the Italian motorcar company Pagani.

See also

References

  1. ↑ On the Leading Edge
  2. ↑ Material Properties Data: Carbon–carbon
  3. ↑ LALIT M MANOCHA (24 April 2003). "High performance carbon–carbon composites" (PDF). Sadhana. 28: 349–358. Retrieved 2014-06-28.
  4. ↑ 2000 Mercedes-Benz CL55 AMG F1
  5. ↑ Boeing: Operational Advantages of Carbon Brakes

External links

This article is issued from Wikipedia - version of the 11/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.