RF power amplifier

Not to be confused with Audio power amplifier.
An RF power amplifier
Class C VHF power amplifier based on the transistor MRF317.

A radio frequency power amplifier (RF power amplifier) is a type of electronic amplifier that converts a low-power radio-frequency signal into a higher power signal. Typically, RF power amplifiers drive the antenna of a transmitter. Design goals often include gain, power output, bandwidth, power efficiency, linearity (low signal compression at rated output), input and output impedance matching, and heat dissipation.

Many modern RF amplifiers operate in different modes, called classes, to help achieve their design goals. Some classes are class A, class B, class C and class E.[1] Class D amplifiers are rarely used for RF purposes because they need even higher frequency devices.

Modern RF power amplifiers use solid-state devices such as bipolar junction transistors and MOSFETs.[2] Although transistors and other modern solid-state devices have replaced vacuum tubes in most electronic devices, tubes are still used in some high-power transmitters (see Valve RF amplifier).

Applications

The basic applications of the RF power amplifier include driving to another high power source, driving a transmitting antenna and exciting microwave cavity resonators. Among these applications, driving transmitter antennas is most well known. The transmitter–receivers are used not only for voice and data communication but also for weather sensing (in the form of a radar).

Wideband amplifier design

Impedance transformations over large bandwidth are difficult to realize, thus most wideband amplifiers use 50 Ω output loading. Transistor output power is then limited to

is defined as the breakdown voltage

is defined as the knee voltage

and typically

The loadline method is often used in RF power amplifier design.[3]

References

  1. ↑ Cloutier, Stephen R. "Class E AM Transmitter Descriptions, Circuits, Etc.". www.classeradio.com. WA1QIX. Retrieved 6 June 2015.
  2. ↑ MFJ Enterprises. "Ameritron ALS-1300 1200-watt NO TUNE TMOS-FET AMPLIFIER" (PDF). MFJ Enterprises. Retrieved 6 June 2015.
  3. ↑ Matthew Ozalas (January 14, 2015). "How to Design an RF Power Amplifier: The Basics". youtube.com. Retrieved 2015-02-10.
Wikimedia Commons has media related to RF power amplifiers.
This article is issued from Wikipedia - version of the 11/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.