Quasi-Zenith Satellite System

Quasi-Zenith Satellite System
Country of origin  Japan
Operator(s) JAXA
Type civilian
Status in development
Coverage regional
Precision 0.01–1 meters
Constellation size
Total satellites 4
Satellites in orbit 1
First launch September 2010
Orbital characteristics
Regime(s) 3x GSO
Other details
Cost JPY 170 billion
Website qz-vision.jaxa.jp/USE/en/
Quasi-Zenith satellite orbit
QZSS animation, the "Quasi-Zenith/tundra orbit" plot is clearly visible.

The Quasi-Zenith Satellite System (QZSS), is a proposed three-satellite regional time transfer system and the satellite-based augmentation system for the Global Positioning System, that would be receivable within Japan. The first satellite "Michibiki" was launched on 11 September 2010.[1] Full operational status was expected by 2013.[2][3] In March 2013, Japan's Cabinet Office announced the expansion of the Quasi-Zenith Satellite System from three satellites to four. The $526 million contract with Mitsubishi Electric for the construction of three satellites is slated for launch before the end of 2017.[4] The basic four-satellite system is planned to be operational in 2018.[5]

Authorized by the Japanese government in 2002, work on a concept for a Quasi-Zenith Satellite System (QZSS), or Juntencho (準天頂) in Japanese, began development by the Advanced Space Business Corporation (ASBC) team, including Mitsubishi Electric, Hitachi, and GNSS Technologies Inc. However, ASBC collapsed in 2007. The work was taken over by the Satellite Positioning Research and Application Center. SPAC is owned by four departments of the Japanese government: the Ministry of Education, Culture, Sports, Science and Technology, the Ministry of Internal Affairs and Communications, the Ministry of Economy, Trade and Industry, and the Ministry of Land, Infrastructure and Transport.[6]

QZSS is targeted at mobile applications, to provide communications-based services (video, audio, and data) and positioning information. With regards to its positioning service, QZSS can only provide limited accuracy on its own and is not currently required in its specifications to work in a stand-alone mode. As such, it is viewed as a GNSS Augmentation service. Its positioning service could also collaborate with the geostationary satellites in Japan's Multi-Functional Transport Satellite (MTSAT), currently under development, which itself is a Satellite Based Augmentation System similar to the U.S. Federal Aviation Administration's Wide Area Augmentation System (WAAS).

Orbit

QZSS uses three satellites, each 120° apart, in highly inclined, slightly elliptical, geosynchronous orbits. Because of this inclination, they are not geostationary; they do not remain in the same place in the sky. Instead, their ground traces are asymmetrical figure-8 patterns (analemmas), designed to ensure that one is almost directly overhead (elevation 60° or more) over Japan at all times.

The nominal orbital elements are:

QZSS satellite Keplerian elements (nominal)[7]
Epoch 2009-12-26 12:00 UTC
Semimajor axis (a) 42,164 km
Eccentricity (e) 0.075 ± 0.015
Inclination (i) 43° ± 4°
Right ascension of the ascending node (Ω) 195° (initial)
Argument of perigee (ω) 270° ± 2°
Mean anomaly (M0) 305° (initial)
Central longitude of ground trace 135° E ± 5°

QZSS and positioning augmentation

The primary purpose of QZSS is to increase the availability of GPS in Japan's numerous urban canyons, where only satellites at very high elevation can be seen. A secondary function is performance enhancement, increasing the accuracy and reliability of GPS derived navigation solutions.

The Quasi-Zenith Satellites transmit signals compatible with the GPS L1C/A signal, as well as the modernized GPS L1C, L2C signal and L5 signals. This minimizes changes to existing GPS receivers.

Compared to standalone GPS, the combined system GPS plus QZSS delivers improved positioning performance via ranging correction data provided through the transmission of submeter-class performance enhancement signals L1-SAIF and LEX from QZSS. It also improves reliability by means of failure monitoring and system health data notifications. QZSS also provides other support data to users to improve GPS satellite acquisition.

According to its original plan, QZSS was to carry two types of space-borne atomic clocks; a hydrogen maser and a rubidium (Rb) atomic clock. The development of a passive hydrogen maser for QZSS was abandoned in 2006. The positioning signal will be generated by a Rb clock and an architecture similar to the GPS timekeeping system will be employed. QZSS will also be able to use a Two-Way Satellite Time and Frequency Transfer (TWSTFT) scheme, which will be employed to gain some fundamental knowledge of satellite atomic standard behavior in space as well as for other research purposes.

QZSS timekeeping and remote synchronization

Although the first generation QZSS timekeeping system (TKS) will be based on the Rb clock, the first QZSS satellites will carry a basic prototype of an experimental crystal clock synchronization system. During the first half of the two year in-orbit test phase, preliminary tests will investigate the feasibility of the atomic clock-less technology which might be employed in the second generation QZSS.

The mentioned QZSS TKS technology is a novel satellite timekeeping system which does not require on-board atomic clocks as used by existing navigation satellite systems such as GPS, GLONASS or the planned Galileo system. This concept is differentiated by the employment of a synchronization framework combined with lightweight steerable on-board clocks which act as transponders re-broadcasting the precise time remotely provided by the time synchronization network located on the ground. This allows the system to operate optimally when satellites are in direct contact with the ground station, making it suitable for a system like the Japanese QZSS. Low satellite mass and low satellite manufacturing and launch cost are significant advantages of this system. An outline of this concept as well as two possible implementations of the time synchronization network for QZSS were studied and published in Remote Synchronization Method for the Quasi-Zenith Satellite System[8] and Remote Synchronization Method for the Quasi-Zenith Satellite System: study of a novel satellite timekeeping system which does not require on-board atomic clocks.[9]

See also

References

  1. "Launch Result of the First Quasi-Zenith Satellite 'MICHIBIKI' by H-IIA Launch Vehicle No. 18". 2010-09-11. Retrieved 2011-12-12.
  2. "QZSS in 2010". Magazine article. Asian Surveying and Mapping. 2009-05-07. Retrieved 2009-05-07.
  3. "GNSS All Over the World". The System. GPS World Online. 2007-11-01. Archived from the original on August 23, 2011. Retrieved 2011-12-12.
  4. http://www.spaceflightnow.com/news/n1304/04qzss/ Japan to build fleet of navigation satellites 2013-04-04 Retrieved 2013-04-05
  5. "Service Overview - What is the QZSS?". Cabinet Office, Government of Japan. Retrieved 2016-01-20.
  6. "Service Status of QZSS" (PDF). 2008-12-12. Archived from the original (PDF) on July 25, 2011. Retrieved 2009-05-07.
  7. Japan Aerospace Exploration Agency (2016-07-14), Interface Specifications for QZSS, version 1.7, pp. 7–8
  8. Fabrizio Tappero (April 2008), Remote Synchronization Method for the Quasi-Zenith Satellite System (PhD thesis), retrieved 2013-08-10
  9. Fabrizio Tappero (2009-05-24). Remote Synchronization Method for the Quasi-Zenith Satellite System: study of a novel satellite timekeeping system which does not require on-board atomic clocks. VDM Verlag. ISBN 978-3-639-16004-8.
This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.