Property Specification Language

Property Specification Language (PSL) is a temporal logic extending Linear temporal logic with a range of operators for both ease of expression and enhancement of expressive power. PSL makes an extensive use of regular expressions and syntactic sugaring. It is widely used in the hardware design and verification industry, where formal verification tools (such as model checking) and/or logic simulation tools are used to prove or refute that a given PSL formula holds on a given design.

PSL was initially developed by Accellera for specifying properties or assertions about hardware designs. Since September 2004 the standardization on the language has been done in IEEE 1850 working group. In September 2005, the IEEE 1850 Standard for Property Specification Language (PSL) was announced.

Syntax and semantics

PSL can express that if some scenario happens now, then another scenario should happen some time later. For instance, the property "a request should always eventually be grant ed" can be expressed by the PSL formula:

  always (request -> eventually! grant)

The property "every request which is immediately followed by an ack signal, should be followed by a complete data transfer, where a complete data transfer is a sequence starting with signal start, ending with signal end in which busy holds at the meantime" can be expressed by the PSL formula:

  (true[*]; req; ack)  |=> (start; busy[*]; end)

A trace satisfying this formula is given in the figure on the right.

a simple trace satisfying
(true[*]; req; ack)  |=> (start; busy[*]; end)

PSL's temporal operators can be roughly classified into LTL-style operators and regular-expression-style operators. Many PSL operators come in two versions, a strong version, indicated by an exclamation mark suffix ( ! ), and a weak version. The strong version makes eventuality requirements (i.e. require that something will hold in the future), while the weak version does not. An underscore suffix ( _ ) is used to differentiate inclusive vs. non-inclusive requirements. An a_ and e_ suffixes are used to denote universal vs. existential requirements. Exact time windows are denoted by [n] and flexible by [m..n].

SERE-style operators

The most commonly used PSL operator is the "suffix-implication" operator (a.k.a the "triggers" operator), which is denoted by . Its left operand is a PSL regular expression and its right operand is any PSL formula (be it in LTL style or regular expression style). The semantics of is that on every time point i such that the sequence of time points up to i constitute a match to the regular expression r, the path from i+1 should satisfy the property p. This is exemplified in the figures on the right.

path satisfying r triggers p in two non-overlapping ways
path satisfying r triggers p in two overlapping ways
path satisfying r triggers p' in three ways

The regular expressions of PSL have the common operators for concatenation (), Kleene-closure (), and union (), as well as operator for fusion (), intersection () and a weaker version (), and many variations for consecutive counting and in-consecutive counting e.g. and .

The trigger operator comes in several variations, shown in the table below.

Here s and t are PSL-regular expressions, and p is a PSL formula.

 s |=> t!
if there is a match of s, then there is a match of t on the suffix of the trace,
  • t starts the cycle after s ends,
  • the match of t must reach to its end
 s |-> t!
if there is a match of s, then there is a match of t on the suffix of the trace,
  • t starts the same cycle that s ends,
  • the match of t must reach to its end
 s |=> t
if there is a match of s, then there is a match of t on the suffix of the trace,
  • t starts the cycle after s ends,
  • the match of t may "get stuck" in the middle
 s |-> t
if there is a match of s, then there is a match of t on the suffix of the trace,
  • t starts the same cycle that s ends,
  • the match of t may "get stuck" in the middle

Operators for concatenation, fusion, union, intersection and their variations are shown in the table below.

Here s and t are PSL regular expressions.

s ; t match of s followed by a match of t, t starts the cycle after s ends
s : t match of s followed by a match of t, t starts the same cycle that s ends
s | t
match of s or match of t
s && t match of s and match of t, duration of both is of same length
s & t match of s and match of t, duration matches maybe different
s within t match of s within a match of t, abbreviation of ([*]; s; [*]) && (t)

Operators for consecutive repetitions are shown in the table below.

Here s is a PSL regular expression.

s[*i] i consecutive repetitions of s
s[*i..j] between i to j consecutive repetitions of s
s[*i..] at least i to consecutive repetitions of s
s[*] zero or more consecutive repetitions of s
s[+] one or more consecutive repetitions of s

Operators for non-consecutive repetitions are shown in the table below.

Here b is any PSL Boolean expression.

b[=i] i not necessarily consecutive repetitions of b,
  • equivalent to (!b[*];b)[*i]; !b[*]
 b[=i..j]
at least i and mo more than j not necessarily consecutive repetitions of b,
  • equivalent to (!b[*];b)[*i..j]; !b[*]
b[=i..] at least i not necessarily consecutive repetitions of b,
  • equivalent to (!b[*];b)[*i..]; !b[*]
 b[->m]
m not necessarily consecutive repetitions of b ending with b,
  • equivalent to (!b[*];b)[*m]
b[->m:n] at least m and mo more than n not necessarily consecutive repetitions of b ending with b,
  • equivalent to (!b[*];b)[*m..n]
b[->m..] at least m not necessarily consecutive repetitions of b ending with b,
  • equivalent to (!b[*];b)[*i..]; !b[*]
b[->] shortcut for b[->1],
  • equivalent to (!b[*];b)

LTL-style operators

Below is a sample of some LTL-style operators of PSL.

Here p and q are any PSL formulas.

always p property p holds on every time point
never p property p does not holds on any time point
eventually! p there exists a future time point where p holds
next! p there exists a next time point, and p holds on this point
next p if there exists a next time point, then p holds on this point
next![n] p there exists an n-th time point, and p holds on this point
next[n] p if there exists an n-th time point, then p holds on this point
next_e![m..n] p there exists a time point, within m-th to n-th from the current where p holds.
next_e[m..n] p if there exists at least n-th time points, then p holds on one of the m-th to n-th points.
next_a![m..n] p there exists at least n more time points and p holds in all the time points between the m-th to the n-th, inclusive.
next_a[m..n] p p holds on all the next m-th through n-th time points, however many exist
p until! q there exists a time point where q holds, and p hold up until that time point
p until q p holds up until a time point where q hold, if such exists
p until!_ q there exists a time point where q holds, and p hold up until that time point and in that time point
p until_ q p holds up until a time point where q hold, and in that time point, if such exists
p before! q p holds strictly before the time point where q holds, and p eventually holds
p before q p holds strictly before the time point where q holds, if p never holds, then neither does q
p before!_ q p holds before or at the same time point where q holds, and p eventually holds
p before_ q p holds before or at the same time point where q holds, if p never holds, then neither does q

Sampling operator

Sometimes it is desirable to change the definition of the next time-point, for instance in multiply-clocked designs, or when a higher lever of abstraction is desired. The sampling operator (a.k.a the clock operator), denoted @, is used for this purpose. The formula p @ c where p is a PSL formula and c a PSL Boolean expressions holds on a given path if p on that path projected on the cycles in which c holds, as exemplified in the figures to the right.

path and formula showing need for a sampling operator

The first property states that "every request which is immediately followed by an ack signal, should be followed by a compete data transfer, where a complete data transfer is a sequence starting with signal start, ending with signal end in which data should hold at least 8 times:

  ((true[*]; req; ack)  |=> (start; data[=8]; end)

But sometimes it is desired to consider only the cases where the above signals occur on a cycle where clk is high. This is depicted in the second figure in which although the formula

  ((true[*]; req; ack)  |=> (start; data[*3]; end) @ clk

uses data[*3] and [*n] is consecutive repetition, the matching trace has 3 non-consecutive time points where data holds, but when considering only the time points where clk holds, the time points where data hold become consecutive.

path and formula showing effect of the sampling operator @

The semantics of formulas with nested @ is a little subtle. The interested reader is referred to [2].

Abort operators

PSL has several operators to deal with truncated paths (finite paths that may correspond to a prefix of the computation). Truncated paths occur in bounded-model checking, due to resets and in many other scenarios. The abort operators, specify how eventualities should be dealt with when a path has been truncated. They rely on the truncated semantics proposed in [1].

Here p is any PSL formula and b is any PSL Boolean expression.

p async_abort b either p holds or up until b holds, or p does not fail;
  • b recognized asynchronously
p sync_abort b either p holds or up until b holds, or p does not fail;
  • b recognized synchronously
p abort b equivalent to p async_abort b

Expressive power

PSL subsumes the temporal logic LTL and extends its expressive power to that of the omega-regular languages. The augmentation in expressive power, compared to that of LTL which has the expressive power of the star-free ω-regular expressions, can be attributed to the suffix implication, a.k.a. triggers operator, denoted "|->". The formula r |-> f where r is a regular expression and f is a temporal logic formula holds on a computation w if any prefix of w matching r has a continuation satisfying f. Other non-LTL operators of PSL are the @ operator, for specifying multiply-clocked designs, the abort operators, for dealing with hardware resets, and local variables for succinctness.

Layers

PSL is defined in 4 layers: the Boolean layer, the temporal layer, the modeling layer and the verification layer.

Language compatibility

Property Specification Language can be used with multiple electronic system design languages (HDLs) such as:

When PSL is used in conjunction with one of the above HDLs, its Boolean layer uses the operators of the respective HDL.

References

External links

Books on PSL

This article is issued from Wikipedia - version of the 11/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.