Pre-flight (printing)

In printing, pre-flight is the process of confirming that the digital files required for the printing process are all present, valid, correctly formatted, and of the desired type. The term originates from the preflight checklists used by pilots. The term was first used in a presentation at the Color Connections conference in 1990 by consultant Chuck Weger.

Background

In a common digital prepress workflow, a collection of computer files provided by clients will be translated from an application-specific format such as Adobe InDesign or QuarkXPress to a format that the raster image processor (RIP) can interpret. But before this rasterization occurs, workers in the prepress department confirm the incoming materials to make sure they are ready to be sent to the RIP. This is an important step because it prevents production delays caused by missing materials or improperly prepared materials. Once the incoming materials have passed the pre-flight check, they are ready to be put into production and sent to the RIP.

Files were originally printed as Adobe PostScript; however in modern workflows, PDF files have become the popular file type for submitting data to a RIP. The RIP generates the final raster image that will be printed directly (as in desktop inkjet or laser printing), set to photographic film or paper (using an imagesetter), or transferred direct-to-plate.

Depending on the hardware and software components and configurations, RIPs can experience problems rasterizing the image data contained in PostScript or PDF files. If there is a failure in rasterizing the image, it can be costly, as output systems (printers, plate-setters, etc.) consume expensive supplies, can require extensive amounts of time to process complex image data, and require skilled labor to operate.

The preflight process

The process of preflighting a file helps reduce the likelihood of rasterization problems that cause production delays. Page layout software applications (which allow users to combine images, graphics, and text from a variety of formats) automate portions of the preflight process. Typically, client-provided materials are verified by a preflight operator for completeness and to confirm that the incoming materials meet the production requirements. The pre-flight process checks for:

Other, more advanced preflight steps might also include:

The specifics of what checks are made is governed by the features of the preflight application, the formats of the client provided files, and the targeted output device as well as the printing specifications.

A purpose-built software application is not required to preflight a file, although several commercial applications are available. Many desktop publishing applications have some type of preflight capability, however they may not be as robust as commercial applications. Many printers and publishers utilize high-end preflight and file optimization solutions rather than relying on those within desktop publishing apps. They will make sure the preflight settings match their specific production requirements.

History

Early preflight methods were largely manual, and typically relied on checklists that highly skilled prepress operators would use to verify the production readiness of each incoming job. As desktop publishing and graphics applications, PDLs, RIPs, and output devices evolved, the process became more complex. Software plug-ins and stand-alone applications that supported the major desktop publishing applications were then developed to meet that need, along with proprietary tools made by hardware manufacturers and commercial printers and service bureaus. The developers of the major applications then began to incorporate functionality in their applications, leveraging their knowledge of their own file formats.

This article is issued from Wikipedia - version of the 9/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.