Position weight matrix

This article is about Bioinformatics. For the disease in horses known by the acronym "PSSM", see Equine polysaccharide storage myopathy.

PWMs are often represented graphically as sequence logos.

A position weight matrix (PWM), also known as a position-specific weight matrix (PSWM) or position-specific scoring matrix (PSSM), is a commonly used representation of motifs (patterns) in biological sequences.

PWMs are often derived from a set of aligned sequences that are thought to be functionally related and have become an important part of many software tools for computational motif discovery.

Background

PWMs were introduced by American geneticist Gary Stormo.

The position weight matrix was introduced by American geneticist Gary Stormo and colleagues in 1982^[1] as an alternative to consensus sequences. Consensus sequences had previously been used to represent patterns in biological sequences, but had difficulties in the prediction of new occurrences of these patterns.^[2] The first use of PWMs was in the discovery of RNA sites that function as translation initiation sites. The perceptron algorithm was suggested by Polish American mathematician Andrzej Ehrenfeucht in order to create a matrix of weights which could distinguish true binding sites from other non-functional sites with similar sequences. Training the perceptron on both sets of sites resulted in a matrix and a threshold to distinguish between the two sets.^[1] Using the matrix to scan new sequences not included in the training set showed that this method was both more sensitive and precise than the best consensus sequence.^[2]

The advantages of PWMs over consensus sequences have made PWMs a popular method for representing patterns in biological sequences and an essential component in modern algorithms for motif discovery.^[3]^[4]

From Sequences to PWM

A PWM has one row for each symbol of the alphabet: 4 rows for nucleotides in DNA sequences or 20 rows for amino acids in protein sequences. It also has one column for each position in the pattern. In the first step in constructing a PWM, a basic position frequency matrix (PFM) is created by counting the occurrences of each nucleotide at each position. From the PFM, a position probability matrix (PPM) can now be created by dividing that former nucleotide count at each position by the number of sequences, thereby normalising the values. Formally, given a set X of N aligned sequences of length l, the elements of the PPM M are calculated:

M_{{k,j}}={\frac {1}{N}}\sum _{{i=1}}^{N}I(X_{{i,j}}=k),

where i $\in$ (1,...,N), j $\in$ (1,...,l), k is the set of symbols in the alphabet and I(a=k) is an indicator function where I(a=k) is 1 if a=k and 0 otherwise.

For example, given the following DNA sequences:

`GAGGTAAAC TCCGTAAGT CAGGTTGGA ACAGTCAGT TAGGTCATT TAGGTACTG ATGGTAACT CAGGTATAC TGTGTGAGT AAGGTAAGT`

the corresponding PFM is:

M={\begin{matrix}A\\C\\G\\T\end{matrix}}{\begin{bmatrix}3&6&1&0&0&6&7&2&1\\2&2&1&0&0&2&1&1&2\\1&1&7&10&0&1&1&5&1\\4&1&1&0&10&1&1&2&6\end{bmatrix}}.

and therefore the resulting PPM is:

M={\begin{matrix}A\\C\\G\\T\end{matrix}}{\begin{bmatrix}0.3&0.6&0.1&0.0&0.0&0.6&0.7&0.2&0.1\\0.2&0.2&0.1&0.0&0.0&0.2&0.1&0.1&0.2\\0.1&0.1&0.7&1.0&0.0&0.1&0.1&0.5&0.1\\0.4&0.1&0.1&0.0&1.0&0.1&0.1&0.2&0.6\end{bmatrix}}.

^[5]

Both PPMs and PWMs assume statistical independence between positions in the pattern, as the probabilities for each position are calculated independently of other positions. From the definition above, it follows that the sum of values for a particular position (that is, summing over all symbols) is 1. Each column can therefore be regarded as an independent multinomial distribution. This makes it easy to calculate the probability of a sequence given a PPM, by multiplying the relevant probabilities at each position. For example, the probability of the sequence S = GAGGTAAAC given the above PPM M can be calculated:

p(S\vert M)=0.1\times 0.6\times 0.7\times 1.0\times 1.0\times 0.6\times 0.7\times 0.2\times 0.2=0.0007056.

Pseudocounts (or Laplace estimators) are often applied when calculating PPMs if based on a small dataset, in order to avoid matrix entries having a value of 0.^[6] This is equivalent to multiplying each column of the PPM by a Dirichlet distribution and allows the probability to be calculated for new sequences (that is, sequences which were not part of the original dataset). In the example above, without pseudocounts, any sequence which did not have a G in the 4th position or a T in the 5th position would have a probability of 0, regardless of the other positions.

Creating the PWM

Most often the elements in PWMs are calculated as log likelihoods. That is, the elements of the PWM are transformed using a background model $b$ so that:

M_{k,j}=\mathrm {log_{2}} \;(M_{k,j}/b_{k}).

describes how an element in the PWM (left), $M_{k,j}$ , can be calculated. The simplest background model assumes that each letter appears equally frequently in the dataset. That is, the value of $b_{k}=1/\vert k\vert$ for all symbols in the alphabet (0.25 for nucleotides and 0.05 for amino acids). Applying this transformation to the PPM M from above (with no pseudocounts added) gives:

M={\begin{matrix}A\\C\\G\\T\end{matrix}}{\begin{bmatrix}0.26&1.26&-1.32&-\infty &-\infty &1.26&1.49&-0.32&-1.32\\-0.32&-0.32&-1.32&-\infty &-\infty &-0.32&-1.32&-1.32&-0.32\\-1.32&-1.32&1.49&2.0&-\infty &-1.32&-1.32&1.0&-1.32\\0.68&-1.32&-1.32&-\infty &2.0&-1.32&-1.32&-0.32&1.26\end{bmatrix}}.

The $-\infty$ entries in the matrix make clear the advantage of adding pseudocounts, especially when using small datasets to construct M. The background model need not have equal values for each symbol: for example, when studying organisms with a high GC-content, the values for C and G may be increased with a corresponding decrease for the A and T values.

When the PWM elements are calculated using log likelihoods, the score of a sequence can be calculated by adding (rather than multiplying) the relevant values at each position in the PWM. The sequence score gives an indication of how different the sequence is from a random sequence. The score is 0 if the sequence has the same probability of being a functional site and of being a random site. The score is greater than 0 if it is more likely to be a functional site than a random site, and less than 0 if it is more likely to be a random site than a functional site.^[5] The sequence score can also be interpreted in a physical framework as the binding energy for that sequence.

Information content of a PWM

The information content (IC) of a PWM is sometimes of interest, as it says something about how different a given PWM is from a uniform distribution.

The self-information of observing a particular symbol at a particular position of the motif is:

-\log(p_{{i,j}})

The expected (average) self-information of a particular element in the PWM is then:

-p_{{i,j}}\cdot \log(p_{{i,j}})

Finally, the IC of the PWM is then the sum of the expected self-information of every element:

\textstyle -\sum _{{i,j}}p_{{i,j}}\cdot \log(p_{{i,j}})

Often, it is more useful to calculate the information content with the background letter frequencies of the sequences you are studying rather than assuming equal probabilities of each letter (e.g., the GC-content of DNA of thermophilic bacteria range from 65.3 to 70.8,^[7] thus a motif of ATAT would contain much more information than a motif of CCGG). The equation for information content thus becomes

\textstyle -\sum _{{i,j}}p_{{i,j}}\cdot \log(p_{{i,j}}/p_{{b}})

where $p_{{b}}$ is the background frequency for that letter. This corresponds to the Kullback–Leibler divergence or relative entropy. However, it has been shown that when using PSSM to search genomic sequences (see below) this uniform correction can lead to overestimation of the importance of the different bases in a motif, due to the uneven distribution of n-mers in real genomes, leading to a significantly larger number of false positives.^[8]

Using PWMs

There are various algorithms to scan for hits of PWMs in sequences. One example is the MATCH algorithm^[9] which has been implemented in the ModuleMaster.^[10] More sophisticated algorithms for fast database searching with nucleotide as well as amino acid PWMs/PSSMs are implemented in the possumsearch software and are described by Beckstette, et al. (2006).^[11]

References

1 2 Stormo, Gary D.; Schneider, Thomas D.; Gold, Larry; Ehrenfeucht, Andrzej (1982). "Use of the 'Perceptron' algorithm to distinguish translational initiation sites in E. coli". Nucleic Acids Research. 10 (9): 2997–3011. doi:10.1093/nar/10.9.2997.
1 2 Stormo, G. D. (1 January 2000). "DNA binding sites: representation and discovery". Bioinformatics. 16 (1): 16–23. doi:10.1093/bioinformatics/16.1.16. PMID 10812473.
↑ Sinha, S. (27 July 2006). "On counting position weight matrix matches in a sequence, with application to discriminative motif finding". Bioinformatics. 22 (14): e454–e463. doi:10.1093/bioinformatics/btl227.
↑ Xia, Xuhua (2012). "Position Weight Matrix, Gibbs Sampler, and the Associated Significance Tests in Motif Characterization and Prediction". Scientifica. 2012: 1–15. doi:10.6064/2012/917540.
1 2 Guigo, Roderic. "An Introduction to Position Specific Scoring Matrices". http://bioinformatica.upf.edu. Retrieved 12 November 2013. External link in |work= (help)
↑ Nishida, K.; Frith, M. C.; Nakai, K. (23 December 2008). "Pseudocounts for transcription factor binding sites". Nucleic Acids Research. 37 (3): 939–944. doi:10.1093/nar/gkn1019.
↑ Aleksandrushkina NI, Egorova LA (1978). "Nucleotide makeup of the DNA of thermophilic bacteria of the genus Thermus". Mikrobiologiia. 47 (2): 250–2. PMID 661633.
↑ Erill I, O'Neill MC (2009). "A reexamination of information theory-based methods for DNA-binding site identification". BMC Bioinformatics. 10: 57. doi:10.1186/1471-2105-10-57. PMC 2680408. PMID 19210776.
↑ Kel AE, et al. (2003). "MATCHTM: a tool for searching transcription factor binding sites in DNA sequences". Nucleic Acids Research. 31 (13): 3576–3579. doi:10.1093/nar/gkg585. PMC 169193. PMID 12824369.
↑ Wrzodek, Clemens; Schröder, Adrian; Dräger, Andreas; Wanke, Dierk; Berendzen, Kenneth W.; Kronfeld, Marcel; Harter, Klaus; Zell, Andreas (9 October 2009). "ModuleMaster: A new tool to decipher transcriptional regulatory networks". Biosystems. Ireland: Elsevier. 99 (1): 79–81. doi:10.1016/j.biosystems.2009.09.005. ISSN 0303-2647. PMID 19819296.
↑ Beckstette, M.; et al. (2006). "Fast index based algorithms and software for matching position specific scoring matrices". BMC Bioinformatics. 7: 389. doi:10.1186/1471-2105-7-389. PMC 1635428. PMID 16930469.

External links

3PFDB — a database of Best Representative PSSM Profiles (BRPs) of Protein Families generated using a novel data mining approach.
UGENE — PSS matrices design, integrated interface to JASPAR, Uniprobe and SITECON databases.

This article is issued from Wikipedia - version of the 9/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.