Pollard's rho algorithm

Pollard's rho algorithm is a special-purpose integer factorization algorithm. It was invented by John Pollard in 1975.^[1] It is particularly effective for a composite number having a small prime factor.

Core ideas

The ρ algorithm is based on Floyd's cycle-finding algorithm and on the observation that (as in the birthday problem) t random numbers x₁, x₂, ... , x_t in the range [1, n] will contain a repetition with probability P > 0.5 if t > 1.177n^1/2. The constant 1.177 comes from the more general result that if P is the probability that t random numbers in the range [1, n] contain a repetition, then P > 1 - exp{ - t²/2n }. Thus P > 0.5 provided 1/2 > exp{ - t²/2n }, or t² > 2n ln 2, or t > (2ln 2)^1/2n^1/2 = 1.177n^1/2.

The ρ algorithm uses g(x), a polynomial modulo n, as a generator of a pseudo-random sequence. (The most commonly used function is g(x) = (x² + 1) mod n.) Let's assume n = pq. The algorithm generates the sequence x₁ = g(2), x₂ = g(g(2)), x₃ = g(g(g(2))), and so on. Two different sequences will in effect be running at the same time—the sequence {x_k} and the sequence {x_k mod p}. Since p < n^1/2, the latter sequence is likely to repeat earlier than the former sequence. The repetition of the mod p sequence will be detected by the fact that gcd(x_k mod p - x_m mod p, n) = p, where k < m. Once a repetition occurs, the sequence will cycle, because each term depends only on the previous one. The name ρ algorithm derives from the similarity in appearance between the Greek letter ρ and the directed graph formed by the values in the sequence and their successors. Once it is cycling, Floyd's cycle-finding algorithm will eventually detect a repetition. The algorithm succeeds whenever the sequence {x_k mod p} repeats before the sequence {x_k}. The randomizing function g(x) must be a polynomial modulo n, so that it will work both modulo p and modulo n. That is, so that g(x mod p) ≡ g(x) (mod p).

Algorithm

The algorithm takes as its inputs n, the integer to be factored; and , a polynomial computed modulo n. This will ensure that if , and , then . In the original algorithm, , but nowadays it is more common to use . The output is either a non-trivial factor of n, or failure. It performs the following steps:^[2]

    x ← 2; y ← 2; d ← 1
    while d = 1:
        x ← g(x)
        y ← g(g(y))
        d ← gcd(|x - y|, n)
    if d = n: 
        return failure
    else:
        return d

Note that this algorithm may fail to find a nontrivial factor even when n is composite. In that case, the method can be tried again, using a starting value other than 2 or a different . The name ρ algorithm comes from the fact that the values of eventually repeat with period d, resulting in a ρ shape in a graph of the values.

Variants

In 1980, Richard Brent published a faster variant of the rho algorithm. He used the same core ideas as Pollard but a different method of cycle detection, replacing Floyd's cycle-finding algorithm with the related Brent's cycle finding method.^[3]

A further improvement was made by Pollard and Brent. They observed that if , then also for any positive integer b. In particular, instead of computing at every step, it suffices to define z as the product of 100 consecutive terms modulo n, and then compute a single . A major speed up results as 100 gcd steps are replaced with 99 multiplications modulo n and a single gcd. Occasionally it may cause the algorithm to fail by introducing a repeated factor, for instance when n is a square. But it then suffices to go back to the previous gcd term, where , and use the regular ρ algorithm from there.

Application

The algorithm is very fast for numbers with small factors, but slower in cases where all factors are large. The ρ algorithm's most remarkable success was the factorization of the ninth Fermat number, F₈ = 1238926361552897 * 93461639715357977769163558199606896584051237541638188580280321. The ρ algorithm was a good choice for F₈ because the prime factor p = 12389263661552897 is much smaller than the other factor. The factorization took 2 hours on a UNIVAC 1100/42.

Example factorization

Let n = 8051 and g(x) = (x² + 1) mod 8051.

97 is a non-trivial factor of 8051. Starting values other than x = y = 2 may give the cofactor (83) instead of 97.

The example n = 10403 = 101 . 103

Here we introduce another variant, where only a single sequence is computed, and the gcd is computed inside the loop that detects the cycle.

C++ code sample

The following code sample finds the factor 101 of 10403 with a starting value of x = 2.

int gcd(int a, int b) {
	int remainder;
	while (b != 0) {
		remainder = a % b;
		a = b;
		b = remainder;
	}
	return a;
}

int main () {
	int number = 10403, x_fixed = 2, cycle_size = 2, x = 2, factor = 1;

	while (factor == 1) {
		for (int count=1;count <= cycle_size && factor <= 1;count++) {
			x = (x*x+1)%number;
			factor = gcd(x - x_fixed, number);
		}

		cycle_size *= 2;
		x_fixed = x;
	}
	cout << "\nThe factor is  " << factor;
}

The results

In the following table the third and fourth columns contain secret information not known to the person trying to factor pq = 10403. They are included to show how the algorithm works. If we start with x = 2 and follow the algorithm, we get the following numbers:

The first repetition modulo 101 is 97 which occurs in step 17. The repetition is not detected until step 23, when x = x_fixed (mod 101). This causes gcd(x - x_fixed, n) = gcd(2799 - 9970, n) to be p = 101, and a factor is found.

Complexity

If the pseudo random number x = g(x) occurring in the Pollard ρ algorithm were an actual random number, it would follow that success would be achieved half the time, by the Birthday paradox in iterations. It is believed that the same analysis applies as well to the actual rho algorithm, but this is a heuristic claim, and rigorous analysis of the algorithm remains open.^[4]

References

Additional reading

• Katz, Jonathan; Lindell, Yehuda (2007), "Chapter 8", Introduction to Modern Cryptography, CRC Press 

External links

• Weisstein, Eric W. "Pollard rho Factorization Method". MathWorld. 

• Java Implementation