Plug compatible

Not to be confused with Plug computer.

A plug-compatible machine is one that has been designed to be backwards compatible with a prior machine. In particular, a new computer system that is plug-compatible has not only the same connectors and protocol interfaces to peripherals, but also binary code compatibilityβ€”it runs the same software as the old system. A plug compatible manufacturer or PCM is a company that makes such products.

The term may also be used to define replacement criteria for other components available from multiple sources. For example, a plug-compatible cooling fan may need to have not only the same physical size and shape, but also similar capability, run from the same voltage, use similar power, attach with a standard electrical connector, and have similar mounting arrangements. Some non-conforming units may be re-packaged or modified to meet plug-compatible requirements, as where an adapter plate is provided for mounting, or a different tool and instructions are supplied for installation, and these modifications would be reflected in the bill of materials for such components. Similar issues arise for computer system interfaces when competitors wish to offer an easy upgrade path.

In general, plug-compatible systems are designed where industry or de facto standards have rigorously defined the environment, and there is a large installed population of machines that can benefit from third-party enhancements. Plug compatible does not mean identical replacement. However, nothing prevents a company from developing follow-on products that are backwards compatible with its own early products.

One recurring theme in plug-compatible systems is the ability to be bug compatible as well. That is, if the forerunner system had software or interface problems, then the successor must have (or simulate) the same problems. Otherwise, the new system may generate unpredictable results, defeating the full compatibility objective. Thus, it is important for customers to understand the difference between a "bug" and a "feature", where the latter is defined as an intentional modification to the previous system (e.g., higher speed, lighter weight, smaller package, better operator controls, etc.).

PCM and IBM

The term PCM was originally applied to manufacturers who made replacements for IBM peripherals and later IBM mainframes.

The first example of a plug compatible IBM subsystems were tape drives and controls offered by Telex beginning 1965.[1] Memorex in 1968 was first to enter the IBM plug-compatible disk followed shortly thereafter by a number of suppliers such as CDC, Itel, etc. Ultimately plug-compatible products were offered for most peripherals and system main memory.[2]

The original example of PCM mainframes was the Amdahl 470 mainframe computer which was plug-compatible with the IBM System 360 and 370, costing millions of dollars to develop. An IBM customer could literally remove the 360 or 370 on Friday, install the Amdahl 470, attach the same connectors from the peripherals to the channel interfaces, and have the new mainframe up and running the same software on Sunday night. Unfortunately, system status indicators for operators of the new system were very different, which introduced a learning curve for operators and service technicians.

Similar systems were available from Comparex, Fujitsu and Hitachi, and there were a wide variety of companies providing disk subsystems, including Memorex and Storage Technology Corporation.

See also

References

  1. ↑ Pugh; et al. (1991). IBM's 360 and Early 370 Systems. p. 233.
  2. ↑ "HISTORICAL NARRATIVE STATEMENT OF RICHARD B. MANCKE, FRANKLIN M. FISHER AND JAMESW. McKIE," Exhibit 14971, US vs. IBM, Section 50, p. 750-796, July 1980
This article is issued from Wikipedia - version of the 6/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.