Pillarbox

For a style of mailboxes, see pillar box. For screen rotation and portrait mode, see page orientation.
Pillarboxed image

The pillarbox effect occurs in widescreen video displays when black bars (mattes or masking) are placed on the sides of the image. It becomes necessary when film or video that was not originally designed for widescreen is shown on a widescreen display, or a narrower widescreen image is displayed within a wider aspect ratio, such as a 16:9 image in a 2.39:1 frame (common in cinemas). The original material is shrunk and placed in the middle of the widescreen frame.

Some older arcade games that had a tall vertical and short horizontal are displayed in pillar box even on 4:3 televisions. Some early sound films made 1928–1931, such as City Lights, were filmed in an even narrower format to make room for the sound-on-film track on then-standard film stock. These will appear pillarboxed even on 4:3 screens.[1]

Pillarboxing is the vertical equivalent of letterboxing and is sometimes called reverse letterboxing. Its name is derived from its resemblance to pillar box-style mailboxes used in the UK and the Commonwealth of Nations. The four-direction equivalent is called windowboxing, caused when programming is both letterboxed and pillarboxed.

In order to use the entire screen area of a widescreen display (which is already significantly less than a fullscreen of equal diagonal measurement), and to prevent a reverse screen burn-in on plasma displays, the simplest alternative to pillarboxing is to crop the top and bottom. However, this results in the loss of some of the image within what the producer assumed would be the safe area. This overscan may or may not bother the viewer, but it often cuts-off the channel banner or other on-screen displays. Likewise, the vertical equivalent of pan and scan is called "tilt and scan" or "reverse pan and scan". This moves the cropped "window" up and down, however it is rarely done. A third option is to stretch the video to fill the screen, but this is often considered ugly, as it severely distorts everything on the screen.

Because certain screen resolutions can be used for both fullscreen and widescreen (anamorphic), widescreen signaling (such as the Active Format Descriptor) must be used to tell the display device which to use, or the viewer must set it manually, in order to prevent unnecessary pillarboxing or stretching on widescreen displays.

Stylized pillarboxing on television

Some high-definition television networks and TV stations use "stylized pillarboxing", meaning they fill-in the blank areas on the sides with their HD logo or other still or motion graphics, when the program being shown is only available in 4:3 aspect ratio (standard definition).

The use of graphics assures viewers that they are watching the HD version of a channel, instead of their thinking they are watching the SD version, along with filling the entire screen with a video image rather than the regular black bars. This also tells widescreen television sets with automatic resizing not to stretch the video, and instead to present it in the proper aspect ratio (although conversely, this may cause fullscreen SDTV sets and analog cable TV headends to horizontally compress or to windowbox the video).

A limited amount of local stations also apply custom pillarboxes, but most have removed them with both the advent of all-HD schedules and customer complaints about erroneous technical information in PSIP data. Some TV shows present an "echo" of the edges of the program video in the sidebars, usually blurred. Local TV stations in the U.S. typically use graphics or a simple color gradient for electronic news-gathering packages shown on their local HDTV news programs. This is because portable ENG cameras are often not in HD (due to their number and expense), even if the few permanent ones in the TV studio are.

Some channels have a similar format called "enhanced HD", in which extra informative graphics and text is shown on the side, such as expanded stock quotes, charts, and graphs on CNBC HD+.

Some Japanese anime switched from SD to HD during their run. Sometimes a flashback to a scene produced in SD had to be shown. For instance, in Naruto, the image of Naruto and Sasuke filled in the blank gaps as one of the SD-era flashbacks is being shown.

Also, in the Family Guy episode "Back to the Pilot", Brian and Stewie travel back in time to when the show first premiered, in 1999. To show that, back then, they produced episodes in standard-definition, the entire scene was pillarboxed.

See also

References

This article is issued from Wikipedia - version of the 4/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.