Piaggio P.32

Piaggio P.32
Role Medium bomber
Manufacturer Piaggio Aero
Designer Giovanni Pegna
First flight 1936
Introduction 1938
Retired 1939
Primary user Regia Aeronautica
Number built 28 + 1 prototype [1]


The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.

Design

The P.32 was a twin-engine monoplane with a crew of five or six. The main structure was of wood, with a glazed nose, low cockpit, twin tailfins, and a distinct 'banana' shape to the fuselage. It was armed with a dorsal turret with two 7.7 mm (.303 in) machine guns, a ventral turret, a single machine gun in the nose, and it could carry a 1,600 kg (3,500 lb) bombload.

Utilizing their experience of designing experimental and record-breaking aircraft like the Piaggio P.16, Piaggio P.23M, and Piaggio P.23R, Piaggio designed the P.32 with very small wings for its size. This meant a high wing loading, which required Handley-Page leading edge slats and double trailing-edge flaps to provide enough lift on takeoff and landing.

Development

The development of this aircraft began with the contest announced by the Regia Aeronautica (Italian Air Force) in 1934. The P.32 was one of many contenders, and the most modern.

The prototype first flew in 1936, and was tested at Guidonia, leading to an order for 12 aircraft, followed by a second order for five. These aircraft were fitted with the 615 kW (825 hp) Isotta-Fraschini Asso XI.RC inline V12 engine, and were designated the P.32 I.

In early 1937, the P.32 Is were assigned to XXXVII Gruppo BT, 18 Stormo. The advanced wing design meant that they could be flown only by specially trained crews, but the aircraft was found to be fatally underpowered, with a maximum speed of only 386 km/h (240 mph), and then only with no bombs or defensive weapons carried. They were unable to fly on only one engine, and their handling qualities were inferior to the SM.79 and BR.20.

The P.32 II, fitted with more powerful 750 kW (1,000 hp) Piaggio P.XI RC 40 radial engines was tested, and 12 were delivered in early 1938. The more powerful engines gave a better rate of climb, but the increased weight meant there was no improvement in maximum speed, while the range dropped from 1,950 km (1,200 mi) to 1,700 km (1,100 mi) because of higher fuel consumption.

The P.32 Bis was a redesign that brought the empty weight of the aircraft down from 6,355 kg (14,010 lb) to 5,700 kg (12,600 lb) by reducing its overall size slightly. This gave it a top speed of 378 km/h (235 mph) and a ceiling of 6,300 m (21,000 ft) with the Isotta-Fraschini Asso XI engines, and 420 km/h (260 mph) and a ceiling of 8,000 m (26,200 ft) with the Piaggio P.XI RC 40 engines. However, the prototype crashed on 25 February 1938, killing the test pilot, leading to the cancellation of further development.

The P.32 Is and IIs were taken out of service in April 1938 and were used as training aircraft. In 1939, a P.32 crashed, killing the entire crew. There is no further information about the fate of the remaining aircraft, and most likely they were scrapped soon afterwards.

Variants

P.32 I
With 615 kW (825 hp) Isotta-Fraschini Asso XI.RC V12 engines.
P. 32 II
With 750 kW (1,000 hp) Piaggio P.XI RC 40 radial engines.
Caproni Ca.405 Procellaria
A version built by Caproni specifically for the Istres-Damascus-Paris Air Race of 1937, but not completed in time.
P.32 Bis
A redesign built by Caproni-Reggiane (as the Ca.400). Tested with both types of engine. One prototype built.

Operators

 Kingdom of Italy

Specifications (P.32 I)

General characteristics

Performance

Armament

See also


Related lists

References

Wikimedia Commons has media related to Piaggio P.32.


This article is issued from Wikipedia - version of the 11/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.