Phootprint

Phootprint
Names Phobos Sample Return Mission
Mission type Technology demonstrattor, sample return
Operator European Space Agency
Mission duration 3.5 years (planned)[1]
Spacecraft properties
Manufacturer Airbus Defense and Space
Launch mass 4,200 kg (9,300 lb)[1]
Start of mission
Launch date 2024 (proposed)
Rocket Ariane 5
Launch site Guiana Space Centre
End of mission
Disposal Re-entry capsule
Landing date ~2027
Orbital parameters
Reference system Mars

Phobos

Phobos lander
Sample mass 800 g; return about 100 g (0.22 lb)

Phootprint is a proposed sample-return mission to the Mars moon Phobos by the European Space Agency (ESA), proposed to be launched in 2024.

Overview and status

The Phootprint mission is a candidate for the Mars Robotic Exploration Preparation Programme 2 (MREP-2) at ESA.[1] During 2014, ESA funded a pre-phase A feasibility study and industrial system studies of 8-month duration.[1][2] Currently, it is in phase A, meaning 'mission definition study.'

The mission is proposed to be launched with an Ariane 5 on 2024 with early 2026 as backup date.[1] An Earth swingby would provide greater launcher margin.[1] The spacecraft would orbit Mars for the characterisation phase,[1][3] and when ready, it would maneuver into a quasi-satellite orbit to facilitate landing.[1] Because of the low gravity, the lander would be anchored to the surface during sample collection and launch of the Earth Re-entry Capsule (ERC).

The mission would last about 3.5 years, including cruise, mapping orbit, 7 days on the surface, and sample return cruise time.[1] The spacecraft would be powered by solar arrays.

In August 2015, the ESA-Roscosmos working group on post-ExoMars cooperation, completed a joint study for a possible future Phobos Sample Return mission, and preliminary discussions were held.[4][5]

Objectives

Phobos, one of the two moons of Mars

The top-level science goal is to understand the formation of the Martian moons Phobos and Deimos and put constraints on the evolution of the Solar System (co-formation, capture, impact ejecta).[1]

The mission objectives are: [1]

Mission engineers remark that "no rebound" after landing is a critical condition given the low-gravity environment of landing.[6] Currently, engineers at ESA are leaning toward four cantilever-type landing legs with crushable aluminium honeycomb shock absorber and secondary load limiters.[1]

Spacecraft

The preliminary concept of Phootprint spacecraft is still preliminary and composed by three modules: [6]

Proposed payload

As of 2014, a 30 kg payload is foreseen: [3]

Mission architecture

The proposed mission architecture is: [7]

  1. Ariane 5 launch from Kourou in direct escape
  2. Transfer to Mars (11 months)
  3. Nine months orbiting Phobos/Mars dedicated to science observations and sampling (7 days on the surface)
  4. Departure from Mars to Earth (8 months)

See also

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 Barraclough, Simon; Ratcliffe, Andrew; Buchwald, Robert; Scheer, Heloise; Chapuy, Marc; Garland, Martin (June 16, 2014). Phootprint: A European Phobos Sample Return Mission (PDF). 11th International Planetary Probe Workshop. Airbus Defense and Space.
  2. Supporting the Mars Robotic Exploration Preparation Programme. ESA. 4 July 2015.
  3. 1 2 Koschny, Detlef; Svedhem, Håkan; Rebuffat, Denis (August 2, 2014). "Phootprint - A Phobos sample return mission study". ESA. Retrieved 2015-12-22.
  4. "ESA at MAKS 2015". European Space Agency. Zhukovsky, Russia: ESA. Retrieved 2015-12-22.
  5. Kane, Van (9 June 2014). "A Checkup on Future Mars Missions". The Planetary Society. Retrieved 2015-12-22.
  6. 1 2 Chitu, Cristian Corneliu; Stefanescu, Raluca; Bajanaru, Paul; Galipienzo, Julio; Rybus, Tomasz; Seweryn, Karol; Visentin, Gianfranco; Ortega, Cristina; Barciński, Tomasz (2014). Design and Development of an Active Landing Gear System for Robotically Enhanced Surface Touchdown (PDF). European Space Research and Technology Centre. European Space Agency.
  7. "Sample Return Missions Requirements for Earth Reentry Capsules TPS". D. Rebuffat. ESA.
This article is issued from Wikipedia - version of the 7/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.