Per-hop behaviour
In computer networking, per-hop behaviour (PHB) is a term used in differentiated services (DiffServ) or multiprotocol label switching (MPLS). It defines the policy and priority applied to a packet when traversing a hop (such as a router) in a DiffServ network.
Rule that governs how packets are handled within a diffserv[1] network is called the Per-Hop Behavior (PHB). PHBs are defined to support the general properties controlled by IP precedence. DSCP Contains 6-bits, PHBs are created (one for each combination of the top 3 bits) of the form bbb000 to match the precedence behaviors and leaves the other DSCP values open where each b may take the value zero or 1.
| DSCP Bit Settings | Meaning |
|---|---|
| 000000 | Best effort |
| bbb000 | Conforms to the requirements of Type of Service queuing precedence |
| bbbbb0 | Available for standardization |
| bbbb11 | For experimental of local network usage |
| bbbb01 | For experimental of local network usage, but may be taken for standardization |
References
See also
This article is issued from Wikipedia - version of the 11/11/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.