Paloona Power Station
| Paloona Dam | |
|---|---|
|
The Paloona Power Station located below the Paloona Dam wall | |
  Location of the Paloona Dam in Tasmania | |
| Country | Australia |
| Location | Northern Tasmania |
| Coordinates | 41°16′48″S 146°14′24″E / 41.28000°S 146.24000°ECoordinates: 41°16′48″S 146°14′24″E / 41.28000°S 146.24000°E |
| Purpose | Power |
| Status | Operational |
| Opening date | 1971 |
| Owner(s) | Hydro Tasmania |
| Dam and spillways | |
| Type of dam | Embankment dam |
| Impounds | Forth River |
| Height | 43 metres (141 ft) |
| Length | 171 metres (561 ft) |
| Dam volume | 155 thousand cubic metres (5.5×106 cu ft) |
| Spillways | 1 |
| Spillway type | Uncontrolled side channel |
| Spillway capacity | 2,040 cubic metres per second (72,000 cu ft/s) |
| Reservoir | |
| Creates | Lake Paloona |
| Total capacity | 19,110 megalitres (675×106 cu ft) |
| Catchment area | 759 square kilometres (293 sq mi) |
| Surface area | 17.8 hectares (44 acres) |
| Power station | |
| Name | Paloona Power Station |
| Coordinates | 41°16′59″S 146°14′56″E / 41.28306°S 146.24889°E |
| Operator(s) | Hydro Tasmania |
| Commission date | 1972 |
| Type | Conventional |
| Hydraulic head | 31 metres (102 ft) |
| Turbines |
1 x 30 MW (40,000 hp) Fuji Kaplan turbine |
| Installed capacity | 30 megawatts (40,000 hp) |
| Capacity factor | 0.8 |
| Annual generation | 151 gigawatt-hours (540 TJ) |
|
Website hydro | |
| [1] | |
The Paloona Power Station is a conventional hydroelectric power station located in northern Tasmania, Australia.
Technical details
Part of the Mersey–Forth scheme that comprises eight hydroelectric power stations, the Paloona Power Station is the final station in the scheme. The power station is located immediately below the rock-filled concrete faced Paloona Dam which forms Lake Paloona. Water from the lake is fed to the power station by a short single penstock under the dam.[2]
The power station was commissioned in 1972 by the Hydro Electric Corporation (TAS) and the station has one Fuji Kaplan turbine, with a generating capacity of 30 megawatts (40,000 hp) of electricity. The station output, estimated to be 151 gigawatt-hours (540 TJ) annually,[1] is fed to TasNetworks' transmission grid via an 11 kV/110 kV Siemens generator transformer to the outdoor switchyard.[3][4]
See also
References
- 1 2 "Register of Large Dams in Australia" (Excel (requires download)). Dams information. Australian National Committee on Large Dams. 2010. Retrieved 23 June 2015.
- ↑ "Mersey - Forth". Energy. Hydro Tasmania. Retrieved 3 July 2015.
- ↑ "Paloona Power Station: Technical fact sheet" (PDF). Mersey-Forth Catchment. Hydro Tasmania. Retrieved 3 July 2015.
- ↑ "Principal power stations in Australia". Energy Business Today. Retrieved 8 January 2010.